Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver - Black Powder Coated Steel
(146 reviews)
Price: $27.50
In Stock
Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver - Black Powder Coated Steel
Item # RSCP
Retail:$31.74
Our Price: $27.50
You Save: 13%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (146)
- Q & A (0)
- Videos (2)
- Photos
Brophy Hitch Anti-Rattle - RSCP
- Fits 2 Inch Hitch
- Accessory Anti-Rattle
- Standard Anti-Rattle
- Brophy
- Clamp Style
- Universal
This steel clamp and U-bolt installs on your 2" hitch receiver to stabilize your hitch-mounted accessories. Simply hook the clamp over the lip of your hitch and secure the U-bolt around your accessory using the included nuts to prevent shifting.
Features:
- Clamp and U-bolt stabilize hitch accessories to prevent movement
- Fits most cargo carriers, bike racks, steps, and other non-towing accessories for 2" hitches
- Easy to use
- Hook the clamp over the top lip of your hitch, fit the U-bolt around the accessory, and fasten underneath the hitch using the included nuts
- Black powder coated steel is durable and resists corrosion
- Made in the USA
Specs:
- Overall bracket length: 3-3/4"
- Length from front lip to bolts: 1-3/4"
- Bolts to back of bracket: 2"
- Minimum clearance of bumper to tighten bolts: 1/2"
RSCP Brophy Stabilizer Clamp and U-Bolt for Two Inch Hitch Receiver - Black Powder Coated Steel
Video of Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver - Black Powder Coated Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy U-Bolt Stabilizer Clamp Review
Zach: Hey, everybody. Zach here at etrailer.com. Today we're going to be taking a look at the Brophy U-Bolt Stabilizer. This is going to be an anti-rattle device. What it does is it takes all that shake and play all that movement out of your assessory. I think it personally shines best with cargo carriers.
Cargo carriers are a great way to get a bunch of extra stuff on your trip but one thing they have an issue with is when you get that weight back there, they're not the most stable thing. So they're moving around,they're going to hold your stuff just fine but you can hear that movement, you can see it, it's just a little unnerving.So what this does is this takes a standard cargo carrier we have here, I have a couple of hundred pounds back here and it just makes it a nice stiff right. Now you can see right there, I'm lifting up and I'm not getting much play when this isn't in place. This cargo carrier moves all around. Now the one thing with this style is it doesn't really take out all the side to side.
Now it's shifting a little bit there but it's tightened down where it's holding it in place for the most part.I think that's where the threaded hitch pin style works best. Those do a really good job of keeping the side to side movement down. But I would rather take out that up and down movement personally, because this still does a good job of keeping that side to side play at a minimum. So you can see this as a pretty simple design. It's essentially a steel plate that sits on top.
And then we have a U-bolt that comes up underneath. And what this does is the sandwiches our accessory into our hitch.So it holds it all together. It gives us a nice tight fit. It's pretty easy to put on. It can sometimes be a little difficult when it comes to clearance because you do have to tighten down these nuts.
And that's where I think the hitch pin style where it's just a threaded bolt it goes through. That can be a little bit easier because usually have a little bit more clearance down here to work with but I think this is a really effective way to take all that play out of our accessory.Another thing to keep in mind if you do like that bolt style is you have to have a hollow shank accessory, so you can see here, there's nothing in the shank of this ball Mount. So we can put that device on the inside and put that bolt through. A lot of accessories are solid so you can't put anything in there. And that's where this U-bolt design works. And the cool thing about the U-bolt style is, it works with both styles, whether it's a hollow shank or solid steel, it doesn't matter as long as there's nothing to interfere where you're attaching that to it will work. So you could in theory, use both to eliminate the side to side and the up and down. But I think that this one does a really good job of definitely eliminating the up and down but I think it does a pretty good job of cutting out that side to side action as well.And to cut down on resting corrosion, it has a black powder coat finish on it to keep that at day and then you also have that galvanized U-bolt as well. So to get this installed, first thing we're going to do is, I'm going to lay my top bracket like this. So the part that's pointing down needs to be touching the accessory. And then I'm going to take this U-bolt and I'm going to go up from underneath my hitch and get that lined up with the holes in that plate. And then I'm going to take my lock nuts and get those started so that we can take a 14 millimeter wrench and we can start tightening this down.I think that if you have the ability to use a socket wrench, you should go that route. I don't have the clearance here because of this bumper. So I'm just going to be using a wrench, just going to take a little bit of time but it's definitely going to be worth it. When we get this tightened down, you can see we're starting to get that where it's not moving around, getting a nice tight fit. I don't think you need to really be super aggressive with getting this tightened down but you definitely want it tight. So you eliminate that movement in your shank there.Overall I'm pretty impressed by this. Now this isn't going to take away all of the movement and all the shake and play but just here on this cargo carrier today, it reduced it dramatically. It takes a good amount of effort to get that, to move around up and down. Now, there is still a little bit of side to side but it's not near as noisy. It takes quite a bit more effort to get that, to move around. So I think this is a really good way to go. If you're looking to cut down some of that noise and movement but that's going to do it for our look at the Brophy U-Bolt Stabilizer.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver - Black Powder Coated Steel - RSCP
Average Customer Rating: 4.7 out of 5 stars (146 Customer Reviews)
This steel clamp and U-bolt installs on your 2" hitch receiver to stabilize your hitch-mounted accessories. Simply hook the clamp over the lip of your hitch and secure the U-bolt around your accessory using the included nuts to prevent shifting.by: William 02/11/2023
Excellent service with fast processing! I have made numerous purchases from etrailer and have always been pleased.
by: Bruce05/03/2024
This is a quality stabilizer clamp, unfortunately it did not work for my particular
by: William 08/26/2023
Simple way to stabilize the insert accessory. Simple is best. Appreciate the nylock nuts to secure the top plate. The addition of two heavy duty flat washers under the nuts would be nice. Would purchase again.
by: Bong12/23/2020
Fits perfect. I havent tried on a loaded dirtbike yet but seems will do the job.
Bong
12/24/2021
Been using it often with my dirtbike carrier and my dirtbike. No wobble or movement. Happy with the product.
by: Russ03/01/2022
Heavy duty design insures that this Stabilizer Clamp will survive years of constant & daily on & off use. Common nyloc-style nuts keep the unit tight, but easy to loosen for hitch removal when finished with trailer.
Russ
3/2/2023
Unit is performing as designed and shows no signs of fatigue. This clamp works great for both my trailers.
by: JC 08/10/2016
Great little device at a good price. I'm using it to quiet my RockTamers and the u-bolt is just long enough to seat the nuts. For my application, it would be better to have a slightly longer u-bolt
by: Kent09/17/2023
I use one of these on my truck because I travel on gravel roads and without it the bounces terribly. I bought this one for my side by side. I ordered a different product but it was out of stock, this one seems lighter duty but should work.
by: Glenn 12/01/2022
My truck has a long camper on it. I had to install an 18" hitch extension to tow my boat. After 2000 miles, I noticed there was a lot of movement of the extension, the shims were gone. This Stabilizer Clamp made it rock solid again. Installed in less than 5 minutes.
by: trenchmonkey11/18/2016
Seems to be doing the job just fine. Had clearance issues and had to flip it.
F-350 dually has lip that goes down towards the Class V hitch. Nice not having
the rattle and play prior to picking this up. Worth noting, when you drill your
shin on it now...it might hurt just a little bit more. Just sayin'
Will H.
11/18/2017
still a happy camper!
by: Henry C09/10/2014
Another etrailer great product. It totally stops all the wobble of the hitch and rattles are totally eliminated. I have 3 of these made by Curt Manufacturing and they all work like a champ. The Brophy works just as well and is a little less expensive.
Henry C.
9/12/2015
Great Product even a year later it still works as designed and anyone with a problem simply can not screw nuts and bolts together correctly!!!
by: Richard Burks08/15/2015
The Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver stopped all of the movement of the receiver bar. No mor wiggling around.
Richard B.
8/15/2016
Still working great
by: Walker09/12/2016
Ordered this product for a friend. He likes it. He does not remove hitch from the receiver very often and can leave it attached. It does work to eliminate the rattle.
I remove my hitch after every use and find needing a wrench is a hassle.
Walker
9/12/2017
Still working to stop the rattling however someone else owns it because it would not come off the truck. Rusted solid. Would have been fine had it been oiled or taken off regularly
by: Bernie Z.05/26/2017
Worked great on all three connection points of the 12" dual hitch extender. I am pleasantly surprised and very happy about that.
Bernie Z.
5/30/2018
I still like them
by: Derek B09/01/2017
This worked just as it was supposed to. I never heard a peep out of the draw bar once this was installed. If you want to take the bar out after every use than I wouldn't recommend this, I left the bar in and covered the ball.
Derek B.
9/1/2018
Still going strong and still no rattles. I havent taken it off since I installed it though so I cant speak for its lock function.
by: JohnL01/18/2017
Worked well. Had to reverse direction due to lack of space on hitch receiver. Trailer is much quieter now.
Johnl
1/18/2018
Still using. Works well.
by: J.D.09/07/2016
I've had this on my truck a year now, with over 3,000 miles of boat trailer towing including freeways, stop and go in cities, and potholed and washboard dirt roads. It does exactly what it's designed for, stopping the clunks and noises of a sloppy class IV hitch. I'd get another again if I ever sell this with the truck. It seems to be holding up just fine.
by: Shawn12/05/2017
Great product, I bought this hitch anti-rattle to help keep my Thule bicycle rack from jumping in the receiver when I have it loaded with bikes. It does a great job of keeping the rack connected to the receiver and eliminating all of the up and down slop that would allow the hack to hop up and down as i drove down the freeway.
by: J T01/31/2019
It stopped all the movement and noise on my hitch. Make sure you look at the installation pictures to understand how and where it mounts to confirm you have room for the bolts. I had to trim 1/4 inch off of each bolt with a grinder because my hitch is immediately below the bumper. Arrived on time with good shipping protection. Quality of metal parts was good. It was just as described and shown in picture. Lock nuts with nylon inserts. Black metal was painted, mostly okay finish that I would give it 4 out of 5 on the paint due to some imperfections and scratches from handling and manufacturer. The U-bolt is smaller than my previous one, but seems to be working fine.
by: Winslow11/27/2019
Pretty good. Still some wiggling even when this is cranked down as tight as I'm comfortable cranking it down, but MUCH better than without it.
We drive two vehicles and two trailers. We use this to reduce sway and rattle on a hitch-mounted cargo basket. Since I can drive behind and watch it work, I know just how well it works.
by: Carlos R.02/08/2015
Installed this Brophy Stabilizer CLAMP and it stopped the wobble of my Scooter Carrier.
Tips: When I first installed my Scooter Carrier, it dragged in low drainage areas. So I installed {Inverted} a Maxx Tow Hitch Extender which raised the Carrier about 12 inches. I secured the unit with Anti-Rattle Lock Pin and then, the Brophy Clamp. At the bottom of The Maxx Extender, I installed a Steel Roller-it make first contact in low spots! The Unit now travels with almost zero rattle or sway! It cost me a few extra dollars but, the investment is worth it!
by: Gene T.07/06/2019
Works pretty good to get 85-90% of the “wobble” out. But can be difficult to install on some vehicles due to the location of the receiver in relation to the vehicle bumper of some SUVs. Worth the money though. It is a must have for extensions like when using a bike rack. I would recommend and would buy again.
by: Frator01/08/2018
This little item really works. After installing my new hitch my old ball mount was rattling around quite a bit. It was making a lot of noise especially on starts and stops. It gave me an uneasy feeling that something was going to break loose. Today I hitched up and took an extra two minutes to bolt this little gadget on. Not a single rattle or shutter while driving. I have that relaxed feeling of confidence again.
by: Brian D.09/29/2016
This Brophy Stabilizer Clamp has worked great. I have a wheelchair lift on the back
of my truck that need a stabilizer to stay straight on the hitch. This clamp did the trick . The lift now stays level very happy with purchase.
by: Pete03/06/2020
this item worked for the first move. I removed it from my hitch and upon reapplication, it bent and never worked again. I do not recommend this item for anyone to purchase. Waste of money.
Pete
3/7/2021
did not last two trips. Bent and does not do as stated. Long term BAD PURCHASE.
25
146
Show More Reviews
See what our Experts say about this Brophy Hitch Anti-Rattle
- Fixing Thule Parkway 4 bike Rack That's Rattling In Vehicle HitchWhere exactly is the rattling occurring? If the looseness is between the 1-1/4 inch shank and the 2 inch adapter sleeve, make sure the Allen head screw that secures the sleeve onto the shank is fully tightened. You can try a wrap or two of electrical tape around the 1-1/4 inch shank to act as a shim and hopefully tighten things up a bit. If the rattle is between the 2 inch sleeve and the inside of your receiver tube, you'll need to snug up the hitch bolt a little bit so it fits more tightly....
view full answer... - Recommended Trailer Hitch Anti-Rattle for Cargo Carrier StabilizationThe Viking Solutions Tilt-N-Go II Hauler, ATV Trailer, and Cargo Carrier # 310-VTG401 can absolutely use the Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver # RSCP to help stabilize the carrier. You can alternatively use an internal stabilizer like # 63232 or for the best stabilization use the Blue Ox Hitch Receiver Immobilizer II # BX88224 for stabilization both vertically and horizontally.
view full answer... - Easier to Install Anti-Rattle Device for 2 inch Hitch AccessoryThe Gen-Y anti-rattle device you mentioned part # GY88XR does have a reputation as fitting really tightly. Some people report that using a hammer works for them, but I personally wouldn't want to mess with all of that. A U-bolt style anti-rattle like the part # RSCP would be an easier option that would be just as effective.
view full answer... - Can an Anti-Rattle Device Be Used in Upper Receiver of MaxxTow Dual Hitch Extender MT70070I'm assuming you're speaking of an anti-rattle device. Many anti-rattle devices depend on the receiver tube to have a lip around it. The Roadmaster # RM-061 or the Brophy # RSCP are examples of this type. An anti-rattle device like the # 63232 doesn't depend on the receiver tube having a lip in order to work. Keep in mind that a dual-hitch adapter like the MaxxTow MT70070 will lower the tongue weight capacity of the hitch its used in by 50 percent.
view full answer... - Can Hitch Stabilizer be Used With Convert-A-Ball Cushioned Ball Mount For 2" HitchGood question, and you can definitely still use a hitch stabilizer with the cushioned Convert-A-Ball Ball Mount for 2" Hitches # AMSC6HD. Even with a stabilizer there is still going to be some play in the hitch, so combining it with the cushioning of the Convert-A-Ball is going to be the best way overall to reduce any bounce or rattling, and I recommend going with the Brophy Stabilizer Clamp # RSCP. You can secure the ball mount to your hitch with Hitch Lock # e98880 and for a hitch ball...
view full answer... - Recommended Hitch Receiver Silencer/ImmobilizerWe have many hitch quiters or immobilizers, but many of them are made more for accessories than towing. The Roadmaster will make your hitch quieter and the Brophy Stabilizer Clamp, # RSCP is similar to the other clamp you mentioned. The Roadmaster Quiet Hitch for 2" Trailer Hitches, # RM-061 is a good option as is the Brophy, but I do believe there are better options. I recommend the Blue Ox Hitch Receiver Immobilizer II - 2" Hitches, # BX88224, because it has the ability to stabilize...
view full answer... - Installation of Brophy Stabilizer Clamp The Brophy Stabilizer Clamp and U-Bolt should not be installed upside down. I spoke with my contact at Brophy and he confirmed that the clamp is not intended to be installed any other way than with the majority of the bracket over the top hitch receiver. I have attached a photo showing how the bracket should be installed.
view full answer...
- Anti Rattle Recommendation 2 Inch Receiver On 2009 Jeep Wrangler UnlimitedTo eliminate the rattle you are experiencing, I recommend using a device like the Brophy Stabilizer Clamp, part # RSCP. This includes a U-bolt and a clamp and when tightened, will hold the shank in place reducing the rattle you are seeing. I have attached a product review video you can check out.
view full answer... - Recommended Hitch Extender and Anti-Rattle Compatible with Thule EasyFold XT Bike RackThe Thule EasyFold XT 2 E-Bike Platform Rack # TH903202 is 8 inches from the center of the hitch pin hole to the upright bar of the carrier. My recommendation for your is to use the Hitch Extender For 2" Trailer Hitch Receiver 7" # HE06 or the 8" Curt Extender # C45791 with an Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver - Black Powder Coated Steel # RSCP to help reduce any sway in the adapter. You may also want to use etrailer Trailer Hitch Receiver Lock - Flush Design for...
view full answer... - Recommended Anti-Rattle Adapters For 2-Inch Trailer HitchThere are a couple different anti-rattle devices available to help reduce the rattle you said you are getting with your hitch on your 2002 Pilot. One adapter is the Brophy Stabilizer Clamp and U-Bolt, part # RSCP. This uses a U-bolt to slip over the hitch and a plate that holds the ball mount in place in the hitch by tightening the U-bolt. If you have a hollow ball mount you can use the Anti-Rattle Trailer Hitch Receiver Lock, part # 63232. This uses a spring and block placed inside...
view full answer... - Is There a Replacement U-Bolt for the Brophy Stabilizer Clamp and U-Bolt for 2" Hitch ReceiverI do have an option for you but we don't offer a replacement u-bolt for the Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver part # RSCP. The item is honestly pretty cost effective from the go so even if it were available, a new u-bolt would run you just slightly less than a new assembly and this option gets you new nuts and plate. That said, I think now might be a good time to upgrade to a tool-less design, the Curt Anti-Rattle Hitch Clamp for 2" Hitches part # C27UR.
view full answer... - Can the Roadmaster Quiet Hitch # RM-061 be Used with Cargo CarrierI have a similar product as the part # RM-061 that would be confirmed to work for you, but this is only intended for flat-towing. Which means when one vehicle tows another vehicle with all 4 wheels on the ground using tow bars. Check out the FAQ article I attached on flat towing for more info. The Brophy Stabilizer Clamp and U-Bolt # RSCP is a similar device that should work great for you. Check out the review video I attached for more info.
view full answer... - Recommended Anti-Rattle Adapter For 2-inch Trailer Hitch And Bike Carrier With 1-1/4 Inch ShankThe anti-rattle adapter I recommend for your bike carrier is part # RSCP. This adapter lets you still use the Yakima 2-inch adapter for the shank of your bike carrier. I have attached a photo that shows how the adapter is attached to the trailer hitch and the shank of your bike carrier. If you are looking for a replacement bolt for your Yakima bike rack let me know what the model of the bike carrier is and I will be glad to see if we have a replacement that will work for you. I have...
view full answer...
- Roadmaster Quiet Hitch Compared to Other Style Hitch ImmobilizersThe Roadmaster Quiet Hitch # RM-061 and other hitch immobilizers use the force from tightening the U-bolt to force the hitch shank or ball mount to seat tight against the opening of your vehicle's hitch. The hitch immobilizers are designed eliminate the rattle and help secure the hitch mounted accessory. The main difference between the Quiet Hitch and the StowAway style, we have a version of this anti-rattle device # RSCP, is that one was designed by a company that make tow bars and the...
view full answer... - Does Brophy RSCP Hitch Stabilizer Clamp Carry any Professional Weight Rating or DocumentationAccording to Brophy, their # RSCP stabilizer clamp doesn't carry any documentation because it's not solely intended to bear weight. It's only purpose to to hold a hitch ball mount immobile in a receiver tube.
view full answer... - Anti-Rattle to Work When Towing a TrailerThe Brophy Stabilizer Clamp and U-Bolt # RSCP is not to be used for towing. If you're looking for something to use to tow the Pro Series Anti-Rattle Device for 2" x 2" Trailer Hitch Receivers # PS63091 is an excellent option. Its jam nut sets it apart from the others because it keeps it as secure over time as it was when installed. It can absolutely be used with a ball mount for towing. Check out its demo video.
view full answer... - Options For Reducing Trailer Hitch Rattle When Towing Camper With 2013 Honda PilotThere are a couple different anti-rattle devices available to help reduce the rattle you said you are getting with your hitch on your 2002 Pilot. One adapter is the Brophy Stabilizer Clamp and U-Bolt, part # RSCP. This uses a U-bolt to slip over the hitch and a plate that holds the ball mount in place in the hitch by tightening the U-bolt. If you have a hollow ball mount you can use the Anti-Rattle Trailer Hitch Receiver Lock, part # 63232. This uses a spring and block placed inside the...
view full answer... - What Size Hitch is the Brophy Stabilizer Clamp and U-Bolt # RSCP Designed to FitIf the hitch opening on your ATV is 2 inches by 2 inches the Brophy Stabilizer Clamp and U-Bolt # RSCP that you referenced would fit and work well. For more information on hitch sizes check out the help article I attached.
view full answer... - Dimensions of Brophy Stabilizer Clamp and U-Bolt for 2-Inch Hitch Receivers # RSCP The Brophy Stabilizer Clamp and U-Bolt for 2-Inch Hitch Receivers # RSCP includes a u-bolt whose interior measurement (inside the two posts) is 2-5/8-inches. This is intended to fit the majority of 2-inch hitch receivers. We do offer hitch stabilizers for the larger 2-1/2-inch hitch size and these can be seen on the linked page, including Roadmaster # RM-062. The u-bolt in this kit measures 4-3/16-inches between the two posts as shown in the linked photo. If you'd care to let me know...
view full answer...
- Electric Jack for 2017 Winnebago Micro Minnie 2106 fbs Plus Wiring ProductsA quick and easy jack upgrade can be done with the etrailer # EJ-3520-BBX Electric Jack with foot plate. You can further upgrade by selecting the Lippert # LC643589 Smart Jack. Hitch memory automatically returns your trailer to the position at which you unhooked. Up/down buttons allow easy one-touch operation. Check out the attached videos to see the extra features. Both of these jacks install where you old one is right behind the coupler and will not interfere with your weight distribution...
view full answer... - Recommended No-Rattle Trailer Hitch Wedge For Bike Rack On 1-1/4 And 2 Inch HitchesThe Brophy Stabilizer Clamp and U-Bolt, part # RSCP you referenced is designed to work with 2 inch receivers and would not have enough thread to use on a 1-1/4 inch receiver, but we may have a solution for you. The Roadmaster # RM-061-125 will work on 1-1/4" receivers and reduce your rattle considerably. I have attached a video.
view full answer...
- Installation of Brophy Anti-Rattle Stabilizer Clamp and U-Bolt Upside DownThe Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver # RSCP holds the ball mount up against one surface of the receiver opening. The location as the top or bottom does not effect function. The u-bolt will be able to handle the weight in any of these locations as the ball mount and receiver are really doing the lifting and this adapter is securing the position to avoid rattle. You can see in the attached installation details that they have installed it in both ways and state "Note:...
view full answer... - Recommended Anti-Rattle for 2 Inch Trailer Hitch ExtenderTo reduce the rattle on a 2" trailer hitch extender like the Brophy Hitch Extender # HE06, the best option is a clamp, the Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver # RSCP. This stabilizer is simple to use, clamping onto your hitch and helping minimize any rattle. I have added a link to a video review for you to check out as well of the Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver # RSCP.
view full answer...
- Weight Capacity and Clearance at Vehicle for Curt Trailer Hitch Mounted Spare Tire Carrier C31006Curt's Trailer Hitch Mounted Spare Tire Carrier # C31006 does not carry a specific weight rating since it is designed to work with virtually any common size of trailer or vehicle tire, including your 235/55R18. Note tire mounting hardware is not included. As for clearance at the back of your Sienna, you can measure from the hitch pin hole rearward to the rear-most part of the vehicle to see how much clearance you need. The linked article will help with this process. The Curt tire carrier...
view full answer...
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Amber S
Updated by:
Adele M
Updated by:
Rachelle B
Updated by:
Wilson B
Updated by:
Carrie F
Written by:
Laura H
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Zach D
Test Fit:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
William
2/12/2024
This product does what it was designed to do, it stops the rattling of the hitch and also helps create a good ground to the trailer. I have had this product for one year.