Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2

See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• Wheel Bearings, Seals and Grease Caps for Dexter 10 Inch Trailer Hub/Drum with 8-247 Casting Number
  The 8-247 casting number refers to a Dexter 10 inch hub/drum with a 5 on 4-1/2 inch bolt pattern. The hub/drum uses a # L68149 inner and a # L44649 outer bearing and 10-19 grease seals, part # RG06-050, sold in pairs. For grease caps, use # RG04-020 sold in pairs. If your trailer has EZ lube spindles, you'd use # RG04-040 which feature removable plugs so you can easily access the grease zerks in the end of the spindles. We don't offer a synthetic grease. What we recommend and what our...
  view full answer...
• How to Identify Which Replacement Bearing Kit for Keystone Passport 151 Ultra Light Travel Trailer
  You do have a Dexter axle, but I don't have enough information to provide specific replacement parts. What appears in your photo looks more like a catalog than an owner's manual. Dexter offers many different axles in the 600-8000 lb range, all of which would use different bearing sets. Unfortunately, there isn't a database that would allow me to look up which bearings your axle uses, but I can make a pretty good guess which you'll want to confirm. Given the 3885 GVWR you very likely have...
  view full answer...
  
• Is Grease Seal TCM171255 The Same As Double Lip 10-19 Grease Seal?
  The TCM171255 is the same as the 10-19 Grease seal # RG06-050 so the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100 you were looking at would be correct for your spindle since it includes inner bearing # L68149, outer bearing # L44649, races, and grease seal # RG06-050. I included a video of the # BK2-100 for you to take a look at.
  view full answer...
• Replacement Seals for Hubs on Dexter D35 Axle
  Yes. The hub group associated with the Dexter D35 axles use 10-19 seals. Set # RG06-050 includes two 10-19 seals. I have linked a video review of these seals for you.
  view full answer...
• How to Pick the Correct Brake Assemblies and Bearings for 2006 Forest River Grand Surveyor Trailer
  If you have 10 inch brake assemblies currently the # 23-26 and # 23-27 would be the correct assemblies to get. You might measure the bolt assembly that the brake assemblies mount to. The # 23-26 and # 23-27 has bolts holes that are 2-7/8 inches apart on center. Since you are going to have to remove your hub and bearings anyway I would recommend you just remove them now to verify the bearing numbers that you would need, the numbers of the bearings will be stamped on the bearings. If you...
  view full answer...
• How to Determine if Kodiak Disc Brake Kit # K2HR35D Will fit Trailer
  I don't ability to look up the trailer axle capacity of your trailer, but if the trailer does have a 3,500 lb axle capacity the Kodiak Disc Brake Kit # K2HR35D would fit and work well. This is a very common axle capacity so it's most likely what you have. You can find this info normally by looking on the axle for a sticker with capacity info or by looking on the plate where the VIN is listed. The bearings needed are # L68149 and # L44649 and the seal is part # RG06-050.
  view full answer...
• Grease Seals For Dexter Axle 4271.44 Dmp. 46385A
  We do indeed have the right grease seals for your Tie Down/Dexter 4271.44 Dmp. 46385A, with the correct pair being the following: - Grease Seal # RG06-050
  view full answer...
• Replacement Bearings and Seals for 2019 Grand Design Imagine 22RBE With 3k Dexter Axle
  What you have on your 2019 Grand Design Imagine 22RBE is a 3,000 lb Dexter axle. The inner bearing is # LM67048 and the outer bearing is # L44649. The correct grease seal is the # RG06-050 (10-19).
  view full answer...
• Parts Needed to Upgrade to Electric Over Hydraulic Disc Brakes on 19 Foot Trail Lite Travel Trailer
  To convert the electric brakes currently on your travel trailer to an electric over hydraulic disc brake system, you'll want to use a hub/rotor kit like part # K2HR35D. The kit you referenced, part # K2R35D is a slip on rotor, and would be used only if your current hubs were idler hubs, so it won't work for your application. The # K2HR35D kit includes hub/rotors that use a # L68149 inner and an # L44649 outer bearing, and the races are included. The kit is compatible with 13-16 inch wheels...
  view full answer...
• The Difference of Single Lip And Double Lip Grease Seals
  The difference between the single lip and double lip seals is that the double lip grease seal will have two rubber lips that are in contact with the spindle. The double lip grease seals are usually used in marine applications to give a better seal and protect the bearings from the water, which can cause damage to them. The best way to determine what grease seals are needed for your spindle is to get the part numbers from the inner and outer bearings from that spindle. If you have the bearing...
  view full answer...
  
• Recommended Grease Seal For Trailer With L68149 And L44649 Bearings
  The grease seal you need for your hub is part # RG06-050. This includes 2 seals in the package. If you want to replace all of the hub components I recommend part # BK2-100 for each wheel. This includes the inner and outer bearings and races, grease seal, cotter pin and tang washer.
  view full answer...
• Do You Have a Seal With 1.74" ID and 2.58" OD?
  The closest seals we have to your measurements are the Seal # TMK29ZR (I.D. 1.750" / O.D. 2.565") and Seals # RG06-050 (1.719" / OD 2.565"). The # RG06-050 is the most common size found on 3,500lb axles. If you are unsure of the correct seal you can check you axle for manufacturer tag which we can sometimes use to contact the axle manufacturer to verify all the correct replacement components you may need for your axle.
  view full answer...
• How to Pick Out Replacement Hub Seal for Trailer Axle
  Are you looking for the grease seal or the dust cap? Since you said inner that makes me think you need a seal which we can help with if you can take a couple measurements. To pick out a replacement grease seal you will need to measure the diameter of the spindle where the grease seal rides with a digital or dial caliper and then need to measure the hub bore where the current seal rides. With those two dimensions we can pick out the correct seal that you would need. I attached a link...
  view full answer...
• Grease Seal Needed for a Dexter 4,400 lb Axle
  The seal for your Dexter 4,400 lb axle is part # 58846 which we also have in a pack of 2 listed as part # RG06-050 these have an inner diameter of 1.719" and an outer diameter of 2.565".
  view full answer...
• Can I Use Different Bearing Seal Than the Size the Axle Calls For
  You will need to use a grease seal with the same inner diameter listed on the hub specs for your axle. You may want to use a digital caliper to measure the spindle instead of the old seal as old parts dimensions can vary after use. It's more reliable to either use the part number or to measure the spindles. Old seals do not measure the same as when they were new. I have included a diagram showing where to measure on the spindle.
  view full answer...
  
• Replacement Bearings and Grease Seal For Dexter 4,400 lb Axle
  We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following: - Bearings # L68149 and # LM67048 - Races # L68111 and # LM67010 - Grease Seals # RG06-050
  view full answer...
• How to Determine Correct Replacement Hubs, Drums and Brakes for Travel Trailer
  I would be happy to help you determine exactly what you'll need to do in order to determine the correct replacement hubs, drums and brakes for your 2013 Keystone travel trailer. In order to find the correct replacement hubs for your trailer you need to know the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number...
  view full answer...
  
• Possible Grease Seal for Trailer with Bearing Numbers LM11949 and LM67049A
  The grease seal you need might be the part # 010-180-00 which has an inner diameter of 1.68 inches and an outer diameter of 2.33 inches but you would need to verify the inner diameter measurement you took to see if it's not a little larger. It might be easiest to measure the spindle where the seal rides instead since the inner diameter of a grease seal is pretty flexible.
  view full answer...
• Replacement Grease Seal Size for 2018 R-Pod 178
  The grease seal that comes with the bearing kit part # BK2-100 that you referenced is correct for your 2018 R-Pod 178 that you referenced. The inner and outer diameters are close enough that the fit would be good. If you needed just the seal it's part # RG06-050.
  view full answer...
• Replacement Bearing and Seal Kit for 2010 Forest River Viking Epic M-1906 Tent Trailer
  Your 2010 Forest River Viking Epic M-1906 tent trailer has a dry weight spec of 1454-lbs which is perfectly consistent with the specified bearing # L44649. This bearing is typically found on 2K axles as both the inner and outer bearing. We offer a bearing kit for your application, part # BK1-150, which includes 2 bearings, 2 races, grease seal, cotter pin and spindle washer. You'll need one kit for each hub. The included grease seal # 10-9 has an inner diameter of 1.500-inches to match...
  view full answer...
  
• Replacement Grease Seals for 1993 Jayco 1406 Pop-Up Camper Trailer
  Trailer manufacturers, even the best of them, are not known for consistency in the parts they use on their trailers. A manufacturer may use alternate bearings and seals even within a particular production run. You might be able to get the seal number from Jayco by providing them with the VIN (vehicle identification number) from your trailer, although this is likely a long shot too. Better options are to find the part number from the original seal (sometimes tough unless you can get them...
  view full answer...
  
• Looking for Replacement Bearings for Axle Using # L68149 Inner Bearing
  The # L68149 bearing you mentioned is most commonly used with the # L44649 outer bearing, but it is sometimes used with the # LM67048 outer bearing, as well. If you can't read the reference number of your outer inner bearing, you can always use a digital caliper to measure the diameter of the spindle where that bearing rides. If that diameter is abut 1.06, you'll need the L44649 bearing. If the diameter you get is about 1.25 inches, you'll need the # LM67048. The # BK2-100 bearing kit...
  view full answer...
• Grease Seal for 1993 Wells Cargo With 3500 lb Axle and L68149 Inner Bearing
  The # RG06-050 seal you referenced is compatible with the L68149 inner bearing, but you should confirm it to be sure. To be absolutely sure, you can get the number off of your existing seals, if they are not torn up. If you look at the photo I have edited for you, you can see where the reference number is located. You might need a magnifier to see the numbers. If the number is not readable, you can use an accurate measuring device like a digital caliper to measure the diameter of the spindle...
  view full answer...
  
• Correct Bearings and Grease Seals for Dexter Axle # 8437302 on Keystone Cougar
  The correct grease seals and bearings for the Dexter 8437302 is as follows: Inner bearing # L68149 Outer bearing # LM67048 Grease seal # RG06-050 For replacement hub we have the # 8-407-5UC3-EZ which includes all of the above components so you do not need to purchase them separately.
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?