Grease Seal for 1993 Wells Cargo With 3500 lb Axle and L68149 Inner Bearing
Question:
Im thinking I need #RG06-050 seals for my 1993 wells cargo with 3500 posi lube axels,drum #2846,and inner bearing#L68149 is this correct?
asked by: Dan
Expert Reply:
The # RG06-050 seal you referenced is compatible with the L68149 inner bearing, but you should confirm it to be sure.
To be absolutely sure, you can get the number off of your existing seals, if they are not torn up. If you look at the photo I have edited for you, you can see where the reference number is located. You might need a magnifier to see the numbers. If the number is not readable, you can use an accurate measuring device like a digital caliper to measure the diameter of the spindle where the seal would be located (see diagram). The RG06-050 seal has an inner diameter of 1.719 inches. The spindle should measure about 1.73 inches in the area where the seal would sit.
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Continue Researching
- Search Results: l44649
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: carlisle
- Search Results: 4.8 x 12 trailer tires
- Search Results: lm67010
- Search Results: k71~390~00
- Search Results: l68111
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Taskmaster 4.80R12 Radial Trailer Tire - Load Range C
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-1K
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Q&A: 4.80-12 Trailer Tire with 81 MPH Speed Rating
- Q&A: Is AxleTek Idler Hub Available Without The Race
- Q&A: BTR Spindle to Fit Trailer Idler Hub for 2,000 Pound Axles
- Q&A: Recommended Hub Assembly for a Trailer w/ L44549 Bearings
- Q&A: Replacement 4-1/4 Long Idler Hub with 1 Bearings and 1.5 Grease Seal
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: Recommendation to Replace 4.80-12 Trailer Tires
- Search Results: grease
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: etrailer Trailer Idler Hub Assembly Installation