Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"
(30 reviews)
Price: $225.04
In Stock
Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"
Item # LG-177201
Retail:$249.39
Our Price: $225.04
You Save: $24.35
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (30)
- Q & A (0)
- Videos (3)
- Photos
Stromberg Carlson Accessories and Parts - LG-177201
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Stromberg Carlson
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).
Features:
- Replaces the follow jack for your tandem landing gear
- Designed for use with Stromberg Carlson models LG-2 and LG-4
- Can be used with most electric landing gear sets, including Atwood, Venture, and Lippert models
- Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included)
- Constructed of heavy-duty steel
- Made in the USA
Specs:
- Total lift: 34-7/8"
- Travel: 19-7/8"
- Drop leg: 15"
- Leg length: 33-1/2"
- Weight capacity: 4,000 lbs
LG-177201 Stromberg Carlson Replacement Follow Leg for Venture Landing Gear - 33-1/2"
California residents: click here
Video of Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Stromberg Carlson Landing Gear Replacement Lead Leg Review
Hi there fifth wheel owners. Today we're going to be taking a look at Stromberg Carlson's line of replacement landing gear legs. We're going to be looking at both the leading as well as the following leg. These are available in either a 33 and a half inch or 29 and a half inch drop. And there is a difference between those and how it's going to fit in your fifth wheel, so stick along with us, and we're going to show you how to take the appropriate measurements to determine which one's best for you. Here on the inside, you can get a better look at our leg here.
And what you're going to be getting is just the leg that you see here. The leg is going to include the black outer sheathing here. It does have the attachment point at the top for our shaft to connect to, but the shaft does not come included with it.Brackets that it attaches to also don't come included. You'll be reusing those as well. Because the main purpose of these replacements is just for if you have a damaged leg, because in most instances, if your leg gets damaged, it's usually because of an accident.
It does happen. You leave your legs down, you hook up your truck to your fifth wheel, and you start to take off, move a little forward, and the next thing you know, your legs are now damaged. Rather than spend a bunch of money replacing the entire system. We can replace just the damaged components. This is the same leg we we're just looking at, and this is where it extends down through our trailer, the bottom of our tube here.
Coming out of our tube, we have the extension here that is operated by our motor, or if you have a manual crank. And it also includes the drop-leg down here.What you don't get is the quick release here. We do have these available here at etrailer. We just reused the customer's old one. And in most cases, your old hardware is going to be able to swap over, so if it didn't get damaged, then you can just go ahead and reuse it.
The foot also does not come included, but you will receive a new pin. This pin can either be used to attach a foot, or if you don't have a quick link, you can use this pin to operate your drop leg. You just have to pull the pin out, the leg will drop down, and then you have to manually re-insert the included pin over here.Over here we've got our lead leg, and this is going to be very similar to your following leg. The difference is the shaft that comes out of it is designed to hook to your motor or your manual crank. You will get a little bit extra hardware with the lead leg, because you'll get the collar and attachments. You can see the new hardware here, where it attaches to both the cross shaft, as well as the collar that holds our motor and motor transmission in place. The 33 and a half inch length legs are going to be a direct replacement for Stromberg Carlson's LG-2 and LG-4 systems. The 29 and a half inch legs are going to be a direct replacement for Stromberg Carlson's LG-1 and LG-3 systems. Now regardless of which one you get, they're going to have a total lift of 34 and 7/8ths of an inch. And that's going to be the amount that comes out plus the drop shaft.Now you may not be aware whether you have a Stromberg Carlson or what model yours is, whether it's an LG-1 or 2. The best way to determine if this leg is going to work with your system is to use some measurements. We're going to go ahead and show you how to take some measurements, because this is not going to work with just the Stromberg Carlsons. It'll work with any system, as long as your measurements line up. So we're going to go ahead and head into the shop and we're going to compare one of the customer's original legs with our new one, and we're also going to show you how the measurements you'll want to take, where you want to take them, and how to use those to purchase the correct leg here on our website.We've got our old jack sitting next to our new jack here. So you can see these are identical, but what you want to check beforehand, and you can do this while this is in here, because you can see where our bolt used to pass through, we want to measure the distance between our tabs. Because these are actually the mounting tabs that hold it in here. It'll rest on the brackets, and those bolts ensure that it's going to stay rested on those brackets. We're going to measure from the outside of our tab to the outside of our tab, and we've got 21 and a half inches here. The most common sizes are going to be 21 and a half inches like we've got here, as well as 19 and a half inches. That's the slightly smaller size, but those are the two most common.The last measurement we need is the total length measurement, and that's going to be from the bottom of our painted surface here, because this is what moves, it actually extends. We want the stationary portion and we want to measure from top to bottom, and we're measuring 33 and a half inches. The two most common sizes are going to be 33 and a half like we have here, and the smaller size, which is typically 29 and a half. More often than not the 29 and a half is going to have that 19 and a half distance, and with our 33 and a half, the length measurements here, most often, you're going to have that 21 and a half for your tabs. Once you've got your measurements taken, you can verify on our website here, when you're looking at the jacks that you are considering purchasing to make sure they're all going to match up with your old one. And that completes our look at Stromberg Carlson's line of replacement landing gear legs..
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" - LG-177201
Average Customer Rating: 4.7 out of 5 stars (30 Customer Reviews)
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).by: Elaine 05/10/2024
We have not installed yet but the customer service and shipping was great!
by: Debra 09/12/2023
Works great still- one year later. Easy to install. E trailer was great to work with. Definitely our first place to look for parts.
by: Steve05/21/2023
While this is the correct length for our Carriage Cameo 5th wheel, the expanded outer tubes that secure the landing gear to the RV frame are in the wrong place. No doubt this works fine for most 5th wheels, but the Carriage 5th wheels require a special leg that is readily available directly from the Venture Mfg. See photo of the OEM special leg made for Carriage and this more common unit.
by: Clay 03/27/2024
Came on time 2 day delivery you couldn’t ask for much more
by: Dave B 11/04/2016
I have a 36ft toy hauler as I was about to park it after a weekend at the dunes I was lowering the Landing gear and nothing motor turned no lift :( called etrailer and they were great they knew everything I needed and had it in stock , here's the best part shipping was very fast!!! , I installed the new replacement legs today and fit like a glove wow I'm back in business !! !!
by: James09/22/2018
Other than having to grind off some material from the insides of the locator tabs on the sides because they would not fit flush they work good. The people at etrailer are great to work with and the landing gear came in 2 days. Thanks
by: Chuck S.12/03/2016
I purchased "landing jacks" for my 5th wheel trailer and had a great experience dealing with "etrailer.com". Even thought I ordered the incorrect item the first time, "etrailer" was excellent in providing me with return instructions; and refund. Upon ordering the correct items, items provided were correct and I installed them without any issues. I would highly recommend "etrailer.com"
by: michael d.03/30/2017
I couldn't have received better service ! Dana was amazing and I always tell my friends about the great service she provided for me. I received emails start to finish from her the only thing Dana could have done more would have been install the landing gear for me ! as far as the product it is very good quality .
by: David H.04/10/2017
Order re[placement leg for a landing gear on a 5th wheel. The people at etrailer were very helpful, especially Pat, who took the time to research the part that I needed.
by: John05/11/2019
The LG 177201 fit perfect. I removed the top cap and added more lithium grease. Some of the other E trailer down legs are equipped with grease zert fittings. This would have been a nice feature
by: Brand C.10/18/2018
excellent and exact replacement for my broken landing leg on my 5th wheel
by: Dwight01/18/2019
Tim thank you
the landing leg LG-177201 is a match for the vm900.
even the gear Rachel was the same. and it came a day early.
great product at a good price.
by: Bill 03/20/2020
Made in USA ,great price, will install today and am sure it will operate as expected. David found what I needed and provided fine service.
by: George 10/03/2022
Perfect fit. Quick delivery
by: William 09/01/2021
Just what I ordered and they were perfect. Thanks Bill
by: Michael11/26/2018
There is nothing they could do to make this better experience, including the thoughtful follow up. Thanks to all of you.
by: Ray 07/06/2021
Worked well. Easy to install
by: Brian 01/28/2021
Works great
by: Ronald 06/06/2021
Exact fit. Seems to operate just fine. Very surprised I received it is a couple days.
by: Philip 10/07/2019
Went right in and worked
by: William11/27/2018
Good quality and fair price.
by: Sheridan Sauer07/26/2018
Thank you so much. They were quick getting here and easy to assemble!
by: Steve 06/03/2021
Very fast delivery. Part fit perfect
by: Lorraine 09/18/2023
by: Terri 07/27/2023
25
30
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- Replacement Leg Needed for a Stromberg Carlson LG-4 Landing GearIf one of the legs is requiring prying on with a screwdriver to get it to work, I highly suggest replacing the leg. This will depend on which leg needs to be replaced, but we do have options for both sides. With that being said, if you need the Lead Leg, you will need the # LG-177202. A quick and easy way to tell if it is the lead leg is it will have the gear box and motor attached to it. If these have been removed, the shank coming out of the side of the leg will be longer than the shank...
view full answer... - Replacement Landing Gear For a Bighorn 3670 5TH Wheel CamperWe do have the Replacement Lead Leg # LG-177202 and Follow Leg # LG-177201 for your Lippert System. These legs are marked for Stromberg Carlson but they are the same Lippert legs you need on your Bighorn 3670. If you also need to replace the motor or gearbox I recommend switching to the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This landing gear set will get rid of the cross bar between the legs and give you individual motors that will operate the jacks independently....
view full answer... - Replacement Slave/Follow Leg for Atwood Landing Gear 71415 on 1999 Damon HornetFor a replacement slave leg in your Atwood landing gear set up 71415 you can use Stromberg Carlson, # LG-179014. The lead leg, just in case you want to know, is part # LG-179013. Each leg has a 3,000 pound capacity. These legs have many of the same parts because there is essentially an industry standard for this size leg. Atwood is no longer in business.
view full answer... - Could Stromberg Leg Work for Replacement Landing Gear for 2012 Keystone MountaineerYes you can use the replacement follow leg # LG-177201 to replace the leg you have. Venture, Stromberg, Lippert, and LCI basically all make the exact same jack legs.
view full answer... - Replacement Follow Leg For RV Stabilizer GearGreat question, I do need some more information though. There should be a sticker or stamp somewhere on the legs of the jacks. We need to find out the make and model of the actual unit so we can get the proper one. This information is needed because each brand will have differences in materials, ratios, even balance that can cause the unit to fail or work improperly and cause damages. Also if we get the model number we can get the correct weight capacity and not have to worry about...
view full answer... - Replacement Follower Leg Recommendation for 2011 Jayco Eagle Super LiteWhat you need is the Stromberg Replacement part # LG-177201 for the follow leg and part # LG-177202 for the lead leg. These match the weld brackets you have and are longer than the 179014 you have as well.
view full answer... - Solution for Lippert Landing Gear Follow Leg that Stopped WorkingTake the top off of the jack leg and inspect the bevel gears that you can see. If they look damaged all you'd need is the repair kit part # LC146060. If other components look damaged it would be best to replace the entire leg with part # LG-177201.
view full answer... - 2010 Big Dog Sunnybrook Toy Hauler Landing Gear No Longer Lifting CamperThe Replacement Lead Leg # LG-177202 and Replacement Follow Leg # LG-177201 are going to be the correct replacements for the VMC900R jacks that are currently on your 2010 Sunnybrook Toy Hauler. These have a maximum capacity of 4,000lbs for each leg. It may be a good time to replace the Gearbox # LC276602 as well if you did not do that when you installed the new motor. This could have become damaged when the motor became damaged. The Motor and Switch Kit # LG-217884 is rated for 5,500lbs...
view full answer... - Replacement Follow Leg For Venture VMC900L-339302 Landing Gear LegThe Replacement Follow Leg # LG-177201 matches your current leg at 2-1/2" square on the outer tube with the length of the outer tube being 33-1/2". We also have the Replacement Lead Leg # LG-177202, Aluminum Gearbox # LG-179015 and Motor Kit # LG-217884 that are compatible with these landing gear legs if you want to update all the components with your landing gear.
view full answer... - Landing Gear Replacement for 2006 Keystone Challenger 29RKYour Keystone Challenger 29RK has mounting brackets that was designed for standard RV landing gear legs like the part # LG-2 so for a replacement lead leg you'd want the part # LG-177202 or the follow leg # LG-177201.
view full answer... - Replacement Landing Gear Legs for a 2010 Jayco Eagle Super LiteI have attached a photo for you that shows how to properly measure the outer tube on a landing gear leg. I have not heard of a landing gear leg with a 36-1/2" long outer tube so if this is what you have then I recommend you replace both the lead and follow legs so that you can be sure they match. For this, the correct replacement for you should be part # LG-177202 for the lead leg and part # LG-177201 for the follow leg. In order to make sure they will work you need to measure between...
view full answer...
- How To Find the Correct Replacement Screw For a Landing Gear Leg On a 5th Wheel TrailerI do have an option for you but in order to confirm the correct replacement landing gear leg screw for you, I would need to know the model number of the jack. If you can provide this for me then I can go about seeing if we have the correct landing gear leg screw for you. If you cannot locate any sort of model number then your best option would be to just replace the entire jack leg as this will only cost you sightly more and it will make things much easier in regards to both installation...
view full answer...
- Replacement Jack Legs For VMC900R Landing Gear While we do not have a way to look up your exact jack number we have found the Lead Leg # LG-177202 and Follow Leg # LG-177201 work as replacements for the VMC900R landing gear jack systems. You can verify this is the same jack leg as yours by measuring the overall length at 33-1/2" and the distance between the weld stops at 19-1/2". If you have a different measurement for either please let me know what your measurements are.
view full answer... - Is It Possible To Just Replace The Extended Sleeve For The Front Landing Gear Follow Leg? Typically you have to replace the entire Follow Leg for the landing gear. We do have a few different replacement legs below as this is currently the only way we carry the sleeve you are looking for is part of the entire leg. Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear # LC178652 Replacement Follow Leg for Venture 5th Wheel RV Landing Gear # LC119101 Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201 While I have no way to look up your...
view full answer... - Solution for Atwood Landing Gear Jack Legs that are Damaged on Fifth WheelSo Atwood stopped making fifth wheel landing gear so the replacement legs are no longer available and also there are no other manufacturers that have a suitable replacement. So what you'd need to do is replace the landing gear altogether like with the Stromberg part # LG-183708 for a manual setup or part # LG-1 for a powered kit.
view full answer... - Recommended Landing Gear Leg Replacements for 2008 Rag'n 30 Foot TrailerThe correct replacement landing gear legs for your model number VMC900L is # LG-177201 for a follower leg and # LG-177202 for a lead leg. I've attached the dimensions of these legs so you can confirm a fit on your trailer.
view full answer...
- Replacement Venture Lead and Follower Legs for Venture Landing Gear on 5th Wheel TrailersThe replacement landing gear leg # LG-177202 is rated for 4,000 pounds for an 8,000 pound system using either manual crank or dual motors. For a single motor it is rated for 2,500 pounds. The matching replacement follower leg is # LG-177201. Lippert makes these legs now. They acquired Venture in 2004 or 2005 so since you have a 2009 toy hauler these are the correct replacements.
view full answer... - Replacement Landing Gear Leg for a Venture VMC900R Landing Gear SystemThe VMC900R-263829 part number comes back to a Venture VMC900R system. The correct leg will be determine by the length of the outer tube. If it is 29-1/2" - Replacement Lead Leg for Venture 5th Wheel RV Landing Gear # LC119102 (Lead leg) - Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear # LG-179014 (Follow leg) If it is 33-1/2" - Replacement Lead Leg for Stromberg Carlson Landing Gear# LG-177202 (Lead leg) - Replacement Follow Leg for Stromberg Carlson Landing...
view full answer... - Replacement Lead and Follow Landing Gear Legs to Replace 71488 on 2012 JaycoLanding gear legs # LG-179014 and # LG-179013 may have slightly different dimensions from the OEM units they replace but these parts are usable replacements for the popular LG-1, LG-3, and LG-183708 landing gear sets. Part 71488 was made by RBW which is no longer in business. We also have a longer 33-1/2-inch leg for the LG-2 and LG-4 landing gear, parts # LG-177202 and # LG-177201. These have the same 4000-lb rating and the same 17-1/2-inches between their stops. If you prefer you can...
view full answer... - Will Stromberg Carlson Replacement Follower Landing Gear Leg Fit a Venture Landing Gear SystemYes, you can use Replacement Follow Leg for Stromberg Carlson Landing Gear # LG-177201 with your Venture landing gear system. This same leg design is used by many manufacturers so it is interchangeable with them.
view full answer... - Does etrailer.com Landing Gear Have Same Ratio as Atwood Landing GearSo the Atwood landing gear box that you have has a 3:1 ratio which is the same ratio as what comes with the etrailer.com Landing Gear part # RVLG-8000 that you referenced. For a replacement follow leg for an Atwood landing gear set you'd want the part # LG-177201.
view full answer... - Replacement Follower Leg Recommendation for a Venture Landing Gear SetThe correct replacement follower leg for your Venture landing gear is the Replacement Follow Leg for Stromberg Carlson Venture Landing Gear # LG-177201.
view full answer... - Replacement Follower Leg Recommendation for Landing Gear Set VMC900LThe correct replacement follower leg for your set that has model number VMC900L is the part # LG-177201. If your other leg is still working fine there would be no reason to replace it at this time.
view full answer... - Recommended Landing Gear Replacement Based on Weld Stop Location for Bracket CompatibilityThe bracket spacing between weld stops on your landing gear legs will be the determining factory for your replacement follow leg. There are two standard sizes for the weld stops; 33-1/2 inch legs have weld stop spacing of 19-1/2 and 21-1/2 inches whereas the shorter legs are 15-1/2 and 17-1/2 inches. If you need the longer weld stop spacing, I recommend the Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201. For matching lead leg, you may want # LG-177202. If...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
DeAnne T
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Kathleen M
Video Edited:
Dustin K
Updated by:
Laura H
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Matthew E
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
9/22/2019
Great