Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended
(5 reviews)
Price: $368.88
In Stock
Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended
Item # LC241845
Our Price: $368.88
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (5)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC241845
- Camper Jacks
- Trailer Jack
- Legs
- Driver Leg
- Lippert
Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0.
Features:
- Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0
- Quantity: 1 extended jack leg
LC241845 Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Long
Video of Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert Camper Jacks - Trailer Jack Extended Jack Leg - LC241845
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this replacement Heavy Duty Landing Gear Extended Jack Leg for the Lippert Ground Control 2.0 Leveling System. Now, this part here will replace the heavy duty landing gear extended leg on the Lippert Components Ground Control 2.0 Landing Gear. This one here is the extended outer, this one here is the extended jack leg, so the extended outer tube length, this is your outer tube. So from the very top to the bottom of the outer tube is gonna be 33 and a half inches long.
Now, if you need the driver leg, it has a standard length outer tube of 29 and a half inches long. We do sell that separately. It'll be part number LC241846, and it's usually listed on this product page as a related product. Now, the static static rating on this is 8,000 pounds. The dynamic rating is 4,000 pounds.
Now, this part number would be the same as the Keystone part number of 373472. And the Winnebago part number of 2T0450-10-036. And this is for a quantity of one extended jack leg. But that should do it for the review on the replacement Heavy Duty Landing Gear Extended Jack Leg for the Lippert Ground Control 2.0 Leveling System.
Customer Satisfaction Score:
62% were satisfied with this product
38% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended - LC241845
Average Customer Rating: 4.6 out of 5 stars (5 Customer Reviews)
Replaces the extended, heavy-duty landing gear jack leg on your Lippert Ground Control 2.0.by: Jesse01/24/2022
Needed a replacement front jack for my Lippert Ground Control 2 after a “new to me” trailer hand an issue with old one’s gear box frame failing. Exact fit and was faster than order directly from Lippert. Been a year now and still working great after about 30 moves.
by: Jed 08/09/2023
Perfect fit, but it came unpainted
by: Elmer 03/13/2021
Thanks
by: Chris 12/18/2021
by: Shawn 09/05/2021
5
5
See what our Experts say about this Lippert Accessories and Parts
- Lead and Follow Leg Replacement for Crusader 5th WheelIf you have the Lippert Ground Control 2.0 Electric Leveling System on the Crusader 5th Wheel then you'll need the Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 part # LC241846 for 29-1/2" outer tube or part # LC241845 for 33-1/2" outer tube. They will work on either side of the trailer.
view full answer... - Correct Replacement 29-1/2" Landing Gear Jack for Lippert Ground Control 2.0Since the landing gear jack on your Lippert Ground Control 2.0 is the standard 29-1/2" height then you need the part # LC241846. The other part # LC241845 that you referenced is for if you had the longer version with the 33-1/2" measurement. The length is the only difference between the 2 options.
view full answer... - Replacement Heavy Duty Landing Gear Jack Leg For Lippert Ground Control 2.0The Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended # LC241845 is a replacement for the Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 and will work on either side.
view full answer... - Lippert 2.0 Ground Control Landing Gear Problem SolutionYou'll need a new jack leg based on what you described. For a replacement you'd want the part # LC241845 for the driver side or part # LC241846 for the lead leg that is normally on the passenger side.
view full answer... - Is There a Replacement Bevel Gear Kit for Lippert Ground Control 2.0 Front Landing GearI spoke with my contact at Lippert Components about what the correct replacement bevel gear kit would be for the front landing gear on your 2017 Open Range Roamer 371MBH. He said that the front landing gear for the Ground Control 2.0 actually doesn't have a replacement bevel gear kit so unfortunately you will need to replace both legs. For the standard landing gear you would need part # LC241846 if the outer black tube on your current gear measures 29-1/2". If the outer black tube measures...
view full answer... - Is There a Leg Repair Kit Available for a LC241845 LegThe 241845 actually comes back to the Replacement Heavy-Duty Landing Gear Jack Leg # LC241845 which is the replacement leg for the Ground Control 2.0 which does not have a gear repair kit available so you would need to replace the leg with a new # LC241845. If this by chance is not the leg you think you have and can find a different number I would be happy to help further. But, as far as the 241845 is concerned this is the option.
view full answer... - Replacement Leg for Lippert Ground Control 2.0 LC241846The Lippert part number you referenced is for the Ground Control 2.0 system which you'd have to use the part # LC241845 as a replacement for. There isn't a Stromberg part number that will work.
view full answer... - Is Lippert Ground Control 2.0 System Compatible with 3.0 Motor and Leg?The Lippert 2.0 system is not compatible with the motors on the 3.0 system. The 3.0 system uses electric motors that utilize the hall effect where the 2.0 system does not. This is a completely different design which makes the motor and legs incompatible with the controller and wiring of the 2.0 system. You will need to upgrade your system if you desire that style as your system has been replaced. For the 2.0 system we have the Replacement Heavy-Duty Landing Gear Jack Leg for Ground...
view full answer... - Replacement Driver Leg for Lippert Ground Control 2.0 SystemI have a solution for you and just as an FYI, Lippert had some difficulties with manufacturing and materials procurement during the pandemic; the Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear # LC241846 was one of their parts that they had to stop producing briefly. They have recently (spring 2021) started production on these and expect them to be back in circulation at some point in the next couple of months. With regards to your main question, the # LC241846 is 29-1/2"...
view full answer... - Correct Replacement Lead Landing Gear Leg for Open Range Roamer with Ground Control 2.0The correct replacement lead landing gear leg for a Ground Control 2.0 Leveling System is the Replacement Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear part # LC241846 for standard (29-1/2" outer tuber body) or part # LC241845 for extended (33-1/2" outer tube body).
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Kristina F
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.