Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
(10 reviews)
Price: $247.23
In Stock
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
Item # K08-201-98
Retail:$394.44
Our Price: $247.23
You Save: $147.21
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (10)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - K08-201-98
- 6 on 5-1/2 Inch
- For 5200 lbs Axles
- Hub with Integrated Drum
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- EZ Lube
- 1/2 Inch Stud
- LM67048
- 25580
- Dexter
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 5,200-lb E-Z Lube trailer axles
- Drum dimensions: 12" diameter x 2" wide
- Grease cap dimensions: 2.45" outer diameter
- Bolt pattern: 6 on 5-1/2"
- Wheel bolt diameter: 1/2"-20
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: 25580 (1.75" inner diameter)
- Outer bearing: LM67048 (1.25" inner diameter)
- Races (included)
- Inner race: 25520
- Outer race: LM67010
- Grease seal (included): RG06-070
- Inner diameter: 2.25"
- Outer diameter: 3.376"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-201-98 Dexter 12" Hub and Drum Assembly for 5.2K EZ Lube Axles with Hardware - 6 on 5-1/2
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2 - K08-201-98
Average Customer Rating: 4.6 out of 5 stars (10 Customer Reviews)
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and nuts included.by: Connie 03/13/2024
Perfect fit on our 06 Weekend Warrior. Full set of instructions on how to switch hub was included. Maybe hour or so to install. Test drive went well. Chose overnight delivery which arrived in the morning. Very pleased.
by: Elias10/07/2023
Everything fit properly and installation went smoothly. All needed parts were included, which was nice. The self-adjust worked well and break-in was quick.
I've only put about 1500 miles on the trailer since install, so I can't speak to longevity.
I'd buy them again though.
by: Doug 06/05/2023
Delivery was very fast, order shipped the same day. Came complete with everything needed to replace. Very satisfied.
by: Steve 08/11/2021
by: Scott12/15/2020
Ordering parts was easy, professional help available,parts delivered on time very satisfied
by: Greg07/07/2022
Same as last send each box separately ups destroyed the box
by: Westin02/28/2023
by: Brian08/15/2023
by: Edward 03/20/2024
by: Freddy 05/19/2024
Everything worked as it should very ple ase.
10
10
See what our Experts say about this Dexter Trailer Hubs and Drums
- Replacement Bearings, Hubs, and Brakes For Dexter Axle On 2019 Jayco Eagle 25.5REOK 5TH Wheel CamperYour Dexter axle needs the Bearing Kit # BK3-300 to fit the Hub # K08-201-98 that came on your axles. We do have the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 if you are needing to replace the assemblies. They are also available separately Right # 23-459 and Left # 23-458 or as just the Right Shoes # K71-676 and Left Shoes # K71-675. I recommend the Seal Puller # PTW1219 and Install Set # PTW83020 to make changing the bearings and races easier.
view full answer... - Parts Needed To Convert Hydraulic Drum Brakes To Electric Drum Brakes On Dexter #11 Torflex AxlesWe do have all the parts you will need but they are not available as a complete kit. First you will need to decide if you would like to install the Dexter Electric Trailer Brake Kit # 23-105-106 that includes left and right brake assemblies for one axle or their Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 that has left and right brake assemblies that are self adjusting for one axle. I recommend the self adjusting myself to save yourself from having to manually adjust the...
view full answer... - Correct Bearings and Hubs for Keystone Cougar Half Ton RBS22The LM67048 and 25580 bearing combo is used on 5,200 - 6,000 lb trailer axles. Therefore, you do indeed have 5,200 - 6,000 lb trailer axles as opposed to 3,500 lbs. If you're looking for new hubs we have the Dexter Trailer Hub and Drum Assembly part # K08-201-98 which uses the bearings above.
view full answer... - Recommended Timbren Axle-Less Trailer Suspension for Forest River R-Pod RP-177The gross vehicle weight rating (GVWR) of a Forest River R-Pod RP-177 is 3,728 lbs therefore I recommend the Timbren Heavy-Duty Axle-Less Trailer Suspension part # TASR35HDS06 which has a 3,500 lb rating. I do understand this is less than the GVWR but that's the case for nearly every trailer as you still must factor in tongue weight. This system will also provide a 2" lift and the ability to add larger off-road tires. I have attached for you below new brakes and hubs/drums. Dexter Electric...
view full answer... - What Axle Rating Should Axles On 2017 Jayco Jay Flight 32BDSW W/ 9000lb GVWR Have?On your 2017 Jayco Jay Flight 32BDSW with a GVWR rating of 9000lbs I would think it should come with axles rated 4400lbs or more each to accommodate the GVWR of the trailer. Trailer manufacturers sometimes uses axles that appear underrated, but keep in mind that tongue weight does not fall on the weight of the trailer. In your case the 850lb tongue weight mentioned is the dry tongue weight, not when it is loaded. Tongue weight is typically 10-15% of the trailer weight which should be...
view full answer...
- Determining Correct Replacement Oil Bath Hub For 2003 Mastercraft Single Axle TrailerAssuming you are meaning replacing the entire hub, you will first need to remove the oil bath cap to access the spindle nut. There will be a cotter key holding the nut on, or a clip which will need to be removed next. After that remove the nut and slide off the hub. If you have not already found the correct replacement hub then while the hub is off look for the bearing numbers stamped in the face of both the inner and outer bearings as shown in the included picture of the # L44649. If...
view full answer...
- Replacement of Lippert 5200lb Axle, Electric Drum Brakes, and Hub and Drum Assembly Since time is a factor and we do not have the complete axle brake and hub set up, Item # 8327816-EB, in stock (August 2021). I recommend the Dexter Trailer Axle with E-Z Lube Spindles item # 8327816. This axle is 86-1/2" Long with a 5,200 lbs capacity that will replace your Lippert axle. The TruRyde spring seats item # TRSS300 will work well with these axles. Unless your trailer hubs are brand new you should replace both of them and keep the passenger side one around as a spare. I recommend...
view full answer... - Can Trailer with Spindle Dimensions of 1.78 and 1.25 inch Change Wheel Bolt Pattern 6 on 5.5 inchBased on your spindle dimensions we definitely do have a way to replace your hubs with ones that have a 6 on 5-1/2 inch bolt pattern but you need to measure diameter of seal surface as well to be sure. The part # 8-201-9UC3-EZ that you referenced would be correct for if you have a grease surface diameter of 2.125 inch or if you measure and find 2.25 inch you'd instead need the # K08-201-98 or go with the # 8-201-9UC3-EZ but replace grease seal with # RG06-070.
view full answer... - Does Dexter Hub and Drum K08-201-98 Come With One or Two Hub and DrumsThe Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles # K08-201-98 comes with a single hub and drum. So for a quantity of two you would need to enter "2" in the quantity box on the product page of the Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles # K08-201-98.
view full answer... - Replacement Brakes and Hubs/Drums for 2013 Jayco Jay Flight 28BHBE with 4,400 Lb AxlesI spoke with Dexter about the Jayco Jay Flight 28BHBE and they informed me that although your axle is rated for 4,400 lbs, it uses 5,200 lb axle parts. Therefore, the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-458-459 and Dexter Trailer Hub and Drum Assembly part # K08-201-98 are just what you need. If you just want bearings and seals we have these as well; part # LM67048, part # 25580, and part # RG06-070.
view full answer... - Replacement Hub/Brake Parts For a Dexter 5,200LB Axle Under 2021 Grand Design Reflection 295RLHere is a list of the replacement hub/brake parts you may need for your Dexter axle on your 2021 Grand Design Reflection 295RL. Grease Seal # GS-2250DL Inner Bearing # 25580 Inner Race # 25520 Outer Bearing # LM67048 Outer Race # LM67010 Brake Assemblies # 23-458-459 Hub Assembly # K08-201-98
view full answer... - Replacement Hub & Drum And Electric Brakes For 2019 Keystone Cougar 315RLSThanks for all that info, that was awesome. And for your 2019 Keystone Cougar 315RLS with a 5,200 lb axle, hub with 6 on 5-1/2" bolt pattern, and Nev-R-Adjust electric brakes, here is exactly what you need: - Dexter Trailer Hub and Drum Assembly # K08-201-98 - Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 - Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12
view full answer... - Parts Needed to Add Brakes to Trailer with Dexter 5,200 lb AxleA 5,200 lb Dexter axle is pretty common so to add brakes to it what you'd need is the hub/drum part # K08-201-98 which would then allow you to install brake assemblies like the # AKEBRK-6 and you'd be set. To wire up the assemblies you'd want the part # 10-1-1 which is 10 gauge wire sold by the foot.
view full answer... - 2008 Jayco Baja 10Y With D52 Axle, Rebuild or ReplaceIt appears you have a Dexter D52 axle, this is a 5,200 lb. axle with a 6 on 5-1/2 Bolt Pattern The correct braking assemblies and hubs/drums for a Dexter D52 Axle are, the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-458-459 and the Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ (2.125" seal part # GS-2125DL) or part # K08-201-98 (2.250" seal part # RG06-070). The best way to find out which seal you need is to measure what you have now or just buy the extra seals. The...
view full answer...
- Replacement Hub and Brake Options For 5,200LB Trailer Axle With 4 Bolt Brake FlangeYou will need the Dexter Electric Brake Kit # 23-105-106-09 to bolt to the 4-bolt brake flange on your axle. This is a 12" x 2" brake kit that has the same offset mounting bolt pattern that you have on your current axle. For a hub kit you will need verify if you have an EZ lube spindle and the diameter of your grease seal. You will need to remove one of the hubs to find the inner diameter of the grease seal as either a 2.125" or 2.250". The hubs come complete with bearings, races, caps...
view full answer... - Everything Needed for Upgrading a Jayco Travel Trailer's Axles from 3500 Pounds to 5200 PoundsUpgrading your axles to 5200 pounds is possible, but there's a lot more involved than just that and the wheels: You will need to upgrade your suspension (leaf springs) and your brakes. For that reason, I recommend going with one of our Timbren Axle-less systems. They act as the axle and the suspension, and they work independently which reduces the odds of uneven terrain affecting the entire axle. The 2" Lift Spindle w/ Brake Flange - 5,200 lbs, part # TASR5200S05, has the 5200-lb capacity...
view full answer... - Can 3,500 lb Axles be Changed to 5,200 lb Axles and Parts NeededThe short answer is yes, you can replace your 3,500 lb axle with a 5,200 lb axle. The longer answer is that while you can change to a higher-rated axle, that does not mean your trailer has a higher weight capacity. The reason is, weight ratings are determined by the lowest-rated component, which can be something other than the axle, like the trailer chassis, for example. So you would need to ensure via the trailer manufacturer what the lowest-rated component is. With that said, in order...
view full answer...
- Correct Brakes and Hubs/Drums for Dexter D52 AxleIt sounds like you are looking for the correct braking assemblies and hubs/drums from a Dexter D52 Axle. If that is the case then we have just what you need, the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-458-459 and the Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ (2.125" seal part # GS-2125DL) or part # K08-201-98 (2.250" seal part # RG06-070). The best way to find out which seal you need is to measure what you have now or just buy the extra seals.
view full answer... - Will 5,200 Lb Dexter Trailer Axle Beam with E-Z Lube Spindles Work with 5 on 4-1/2" HubsI do have an option for you but you can't use the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 8327816 with 5 on 4-1/2" hubs since this is a larger axle and it will require at a minimum a 6 on 5-1/2" hub. For this, I recommend the Dexter Trailer Hub and Drum Assembly part # K08-201-98 with Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-458-459.
view full answer... - Replacement Hub/Drum For Lippert Hub Stamped 122093While we do not have the exact Lippert hub/drum we do have the Dexter # K08-201-98 equivalent. This hub has the same 6 on 5-1/2" bolt pattern and fits the same size spindle. The hub includes all new bearings, races, spindle nut, retainer, grease cap, plug and lug nuts to replace your Lippert. We also have the Bearing Kit # BK3-300 if you are only replacing the single hub. For the Bolts and plate we have a basic Set # APUBR-9 or you can get the Coated # CE23003 for superior corrosion protection...
view full answer... - Recommend Trailer Axle Replacement For A 1988 20 Foot TrailerWhen it comes to replacing the axle on your 1988 20 foot trailer, we currently do not have a 4,500 pound axle replacement. We do have the next size up in a 5,200 pound axle that would work if you meet some measurement requirements. We would need to know the hub face to hub face dimension and would also need to know the spring center to spring center measurement. We currently have 3 different sizes: The Dexter Trailer Axle Beam 86-1/2 inches # 8327816 The Dexter Trailer Axle Beam 89...
view full answer...
- Trailer Hub Replacement for 2021 Grand Design Reflection 5th Wheel with 5,200 lb AxleThanks for all of the info on the axle you have on your trailer. Since you have a Dexter 5,200 lb axle with a 6 lug bolt pattern the correct hub/drum you need is the Dexter # K08-201-98.
view full answer... - Hub and Drum and Self-Adjusting Electric Brakes That Fit Lippert 5,200 lb AxleThanks for the info on your axle capacity, and we do have the correct hub and drum as well as self-adjusting brakes for a 5,200 lb Lippert axle, which I verified with the manufacturer, Lippert. Starting with the hub and drum, the correct part depends on if you have an E-Z Lube axle (with a grease zerk) or not: - Standard Axle: Dexter Trailer Hub and Drum Assembly - 5,200 lb Axles # K08-201-97 - E-Z Lube Axle: Dexter Trailer Hub and Drum Assembly - 5,200 lb E-Z Lube Axles # K08-201-98 Then...
view full answer... - Trailer Hubs and Brakes For Timbren Axle-Less Trailer Suspension # ASR35HDS02The Timbren Axle-Less Trailer Suspension # ASR35HDS02 while only having a 3,500lb capacity uses a larger spindle size which is found on 5,200-7,000lb axles. This will require 2 of the Dexter Trailer Hub and Drum Assemblies # K08-201-98. You will be able to use these hubs with your 18" wheel and the 265R18 tire. I recommend using the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 to complete the axle setup. If you do not want the larger heavy duty spindle we have the Timbren...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Kathleen M
Updated by:
Wilson B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
8/14/2022
Been running this drum and bearing assembly for a year and approximately 3500mi now. So far, so good. My only complaint is that it doesn’t come with a new “D” washer which was damaged when the wheel came off. So I had to locate one which wasn’t easy. E-Trailer needs to include this washer for a true complete assembly.