Replacement Hub/Drum For Lippert Hub Stamped 122093
Question:
Good Morning, Looking for replacement parts for a Lippert hub....stamped 122093. Looking for the replacement hub itself,set of bearings, 2 sets of nuts and washers, 1 grease cover and plug. Also need the u-bolts and bottom plate
asked by: Lacey M
Expert Reply:
While we do not have the exact Lippert hub/drum we do have the Dexter # K08-201-98 equivalent. This hub has the same 6 on 5-1/2" bolt pattern and fits the same size spindle. The hub includes all new bearings, races, spindle nut, retainer, grease cap, plug and lug nuts to replace your Lippert. We also have the Bearing Kit # BK3-300 if you are only replacing the single hub.
For the Bolts and plate we have a basic Set # APUBR-9 or you can get the Coated # CE23003 for superior corrosion protection.
Products Referenced in This Question
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 9/16 Inch Diameter
- 7-1/16 Inch Long
- Redline
more information >
Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles - 7" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- 7 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- LM67048
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: Lippert Trailer Hub and Drum Assembly Installation
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-865-7-1-EZ-K
- Video: Review of Lippert Trailer Hubs and Drums - Hub with Integrated Drum - LC53UD
- Search Results: trailer wheel studs
- Search Results: trailer hub assembly
- Search Results: lippert 122096
- Shop: Trailer Spindle Nut 1"
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Search Results: timken 25580
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Trailer Wheel Center Cap Plug - Black
- Shop: Replacement Trailer Hub Bearing - 25580
- Video: Review of TruRyde 1 Inch Diameter Trailer Spindle Castle Nut - 165686
- Search Results: wheel hub
- Search Results: 2250dl
- Search Results: trailer brakes
- Q&A: Will a Dexter Trailer Hub Fit on a Lippert Trailer Axle
- Q&A: Are LM67048 and 15123 Bearings Interchangeable On 5,200 Lb Axles
- Q&A: Lug Nut Size Recommendation for 5,200 lb Trailer Axle
- Q&A: Recommended Brake Drum To Replace A Lippert 122093
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Q&A: Replacement of Lippert 5200lb Axle, Electric Drum Brakes, and Hub and Drum Assembly
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT6SE Review
on Trailer Hubs and Drums
