Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2" x 2" receiver bar sized and punched to fit all common weight-distributing hitch ball mounts or utility ball mounts.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review Part Number E-11. This is Curt 12" long combo bar with the 2" trailer hitch receiver opening in an unpainted finish. This part is designed for use in fabricating under cover receiver hitches, when there's no receiver available. It is made of a cold formed structural tubing. It is sized and punched to fit all common weight distributing hitch ball mounts, or utility ball mounts. Has a forged collar, as you can see right on the opening here.
Again, it's an unpainted, raw finish. The reason that do that; it's ideal for welding, because it will save on your prep time during installation. A few dimensions on this; overall length again from edge-to-edge, going to be right at 12". Again, the opening is going to be 2" x 2". The measurement of the hitch pin hole from the very front to the center of the hitch pin hole is going to be right at 2 1/2". That should do it for the review on part number E-11. The Curt 12" long combo bar with the 2" trailer hitch receiver opening in an unpainted finish.
.
Average Customer Rating: 4.9 out of 5 stars (75 Customer Reviews)
I have a Billy Goat Leaf Loader swing away hitch mount but it didn't come with a hitch to pull a trailer I have a 4x8 open trailer (2000 lb max). So I decided to weld a hitch to it. I also used 1/4 inch thick metal to reinforce the hitch and used etrailer's Safety Chain Loop for Hitch Receivers. I used mig welder with 120amps and had to make extra beads, 3 to 4 beads in some spots i primed it and painted it works great! Thank You etrailer!!!
Receiver hitch as described
Grade A product. Fast shipping! I bought 2 of these to weld on the back of an off road mini camper i am building. They will be supports for stabilizing jacks. 3' square 2 x 2 will slide up and down in them with a foot pad welded to the bottom.
Allen C.
1/19/2018
I used these as leveler guides a year ago. I dont think i will ever have to replace them as long as the off rd trailer last. They are very heavy duty quality. I would post a picture of them in use on finished product if i could.
I got 2 of these receiver's for a rear snow pull plow that I made out of a 9' John Deere snow plow that was used on local airport , used the receivers to modify a Kubota tractor 3 point hitch , it works out great no more snow shoveling by the doors back up and pull in away .
The product is heavy duty. The quality of the weld work is exceptional. Would recommend this product. Packaged well. Bought a curt rubber end cap. Which by the way is another exceptional product (great quality rubber cap) drilled a few holes painted it and works like a champ. Now I can build a carrier for front of my pickup.
We added this receiver to our bumper for front mounting.
Etrailers is our first choice for all trailer accessories.
Turned out awesome, Can Am said they don't make receivers for the OUtlander model so I did!
Quite pleased with etrailer ball hitch accessories which I am using on a spindle wheel motorcycle carrier behind a fifth-wheel trailer.....
Byron
8/7/2018
They are all serving their intended function just fine. Thanks
Product was exactly as advertised. Shipping was fast and pricing was good! I would purchase from this seller again without hesitation!!!
I will be using this product to create a Spare Tire Carrier for my motorhome. :-))
Daniel
3/19/2014
I used this product to build a spare tire rack in preparation for our trip to Alaska. Your product was tough and durable allowing me to weld the two pieces together forming a receiver for the tire rack.
I made a receiver hitch that would bolt onto my camper bumper. I needed this receiver to make the hitch. It worked perfectly.
Darryl
6/4/2018
Thoroughly pleased with the hitch I made. Works great.
I purchased this to weld to the rear of the frame on my 30 ft RV trailer so that I could install my bike rack. It was the perfect size for my application and is still in use today with the bike rack installed in it.
Heavy duty, well-made. I bought the unfinished combo bar so that I could weld a coupler to it (I was assembling a device to make it easier for RV dealers to service my travel trailer that features a Hensley Arrow unit). It works like a charm, and was easier to assemble in its raw form. Also easy to paint after assembly.
Nice receiver, I welded these to my welding trailer for moving my vise, bench grinder and other accessories around. With small 1.5" welds with 1.5" spaces down each side makes for a solid bond and no warping so hitch still slides smoothly.
Product was just what I was looking for. The shipping was fast and the communication was great!
Alan H.
3/12/2017
All good. No problems.
Hitch receivers arrived as promised. The product was much better than I expected. It's just an extra receiver to weld on an existing hitch, but it has a brass collar at the receiving end...very nice, and an extra bonus. I will go to etrailer.com first for any other parts I need.
I bought two 2" receivers 12" long to customize my snow plow for support on each side of the frame. I ordered them and got them less than a week along with e-mails up dating me on the status of delivery. I am very happy with the quality of the product and the service I recieved. Thanks etrailer.
It was exactly as advertised and what i was wanting to modify a hitch. The hitch on my Mercedes station wagon wasn't long enough to clear bumper cover so replacing 8"receiver tube with this was exactly correct length.
It has a really nice forged steel collar around the outside unlike the typical doubled up tube that most receivers use. it will make my custom hitch look great. well worth what I thought was a premium price.
Didn't notice before I bought it, but the support protection ring at the opening is a cast piece, nicely rounded and smooth for a professional install and less likely to yield scrapes when reaching around to hook up chains. As such it is also a complete loop, no joints, and it's welded top and bottom to receiver so it won't pop off if it were to scrape some concrete here and there. Some that I looked at were welded only on one side.
Great Product worked out perfectly for the bike rack project for my RV
Product was exactly as described. Shipping was extremely fast. Will purchase another to make a spare tire holder.
I have ordered a few things. The first time i thought the service was extraordinary because it was my first order, I was wrong the people there constantly exceed my expectations! My order was shipped before it was originally scheduled and arrived 2 days before it was supposed to which gave me more time to make the repair. The parts i ordered were packed extremely well and the quality is hands down the Best! I look here before i go anywhere else. Now that's a great place to buy from.
Bought receiver to fabricate a hitch for my tractor. It's a piece of steel but exactly what I needed. eTrailer has always had competitive prices and great service. Very happy.
Fast service and a quality receiver hit ch
Item was exactly what I needed and as described. Fast shipment. Will order from e trailer again.
Do you have a question about this Hitch Fabrication Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Omar M.
12/8/2015
its holding up and works great! still towing a 4x8 open trailer with it! No rust coming through.. very Solid and Strong