Buyers Products Pintle/Combination Hitch Mounting Kit
(15 reviews)
Price: $20.09
In Stock
Buyers Products Pintle/Combination Hitch Mounting Kit
Item # 3378530
Retail:$30.93
Our Price: $20.09
You Save: 35%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (15)
- Q & A (0)
- Videos (1)
- Photos
Buyers Products Accessories and Parts - 3378530
- Pintle Hitch
- Trailer Hitch Ball Mount
- Mounting Hardware
- Buyers Products
Buyers Products Mounting Kit includes all necessary hardware to mount your Pintle Hook or Combination Hitch. Mounting Kit works with Buyers Products PH30.
- Includes: (4) Cap screws, (4) Hex nuts, and (4) Heavy lock washers
- Fits Buyers Products 30-Ton Pintle Hook
- Steel construction
- Black Oxide finish
8530 Buyers Products Pintle/Combination Hitch Mounting Kit (PH30)
Compare to Tow Ready 43076
Video of Buyers Products Pintle/Combination Hitch Mounting Kit
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Buyers Products Pintle Hitch 3378530 Review
Speaker 1: Today we're going to take a look at the pintle combination hitch mounting kit. This mounting kit includes all your necessary to mount your pintle hook or combination hitch. This mounting kit is designed to work with part numbers 337PH30 and 337PH45 series hitches. Both of those we do sell separately on our website. I did happen to pull one of them. This is the PH45 model, which is the 45-ton pintle hitch, and you can see the forward-mounting holes that this hardware is used to install this.
This hardware is a steel construction. It has a nice, black oxide finish to it. This includes everything laid out here on the table: four of the 3/4-inch by 3 1/2-long grade A inaudible 00:00:43, four of the 3/4-inch grade A hex nuts, and then the four washers.That should do it for the review on the pintle combination hitch mounting kit.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Buyers Products Pintle/Combination Hitch Mounting Kit - 3378530
Average Customer Rating: 4.7 out of 5 stars (15 Customer Reviews)
by: Jerry 05/01/2024
great service
by: Richard 03/11/2024
Everything showed up like it was represented and on a timely fashion
by: David 08/08/2023
great product
by: Gary 09/20/2022
Super fast delivery!!!
by: Daniel11/10/2022
by: Daniel02/27/2020
Thanks for all your help
by: Jose09/17/2021
very happy with the product, match perf ectly
by: John02/24/2020
Very happy !!
by: John 05/23/2023
by: Edwin 05/28/2023
by: Christopher 04/27/2023
by: James 03/11/2021
by: Charles 04/14/2023
by: Thomas 06/02/2021
by: Bobbi10/18/2021
15
15
See what our Experts say about this Buyers Products Accessories and Parts
- Mounting Hole Dimensions of Buyers Products 45 Ton Pintle HookThe Buyers Products 45 Ton Pintle Hook # 337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2 inches on center. I've attached a photo to help. I recommend the mounting kit # 3378530 with this hitch. We don't have anything that will fit that 4 inch square bolt pattern. I've attached a link to all our options from all our manufacturers...
view full answer...
- Mounting Kit Recommendation for 60k Buyers Products Pintle HookThe mounting kit that is recommended for use with the 60k Buyers Products Pintle Hook part # 337PH30 is the part # 3378530 but this is only the hardware to mount the hook and does not include a plate. The hook has a capacity that's higher than any of the plates we offer so you'd have to use this kit in an application where the hook directly attaches.
view full answer... - Availability Of Mounting Hardware For Buyers 45 Ton PIntle HookWe do carry the hardware kit # 3378530 which will fit the buyers Pintle hook # 337PH45 that you were looking at. The bolts technically are made for the buyers 30 ton pintle hook like part # 337PH30. They will fit the 45 ton just fine. These are the strongest bolts that we carry for these pintle hooks.
view full answer... - Mounting Options for Buyers Products 30 Ton Pintle HookAlthough we do offer the mounting kit # 3378530, there are no specific plates we carry capable of handling the same capacity as the # 337PH30. The only option would be the Buyers Products Weld-On Pintle Hitch Plate # 3371809027A. However, this would require custom fabrication to be compatible with the pintle hook. It would also take additional reinforcement to be able to handle the same weight as the hook. It does not have a specific weight rating, but similar custom-fit Buyers hitch...
view full answer... - Bolts and Mounting Plate to Use with Buyers Products 3" I.D. Heavy-Duty Forged Lunette RingGrade 8 bolts are recommended for installing the Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring # 337BDB1394 that you referenced. We actually have a mounting kit for this with part # 3378530 that includes the bolts. Then for a mounting plate we have the part # 337TNP716750100 which is 1 inch thick.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Updated by:
Wilson B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
11/22/2022
If you would like to provide more information about your experience I am more than happy to assist you in getting your review updated.