Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
(15 reviews)
Price: $103.83
In Stock
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
Item # 84655UC1
Retail:$114.77
Our Price: $103.83
You Save: $10.94
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (15)
- Q & A (0)
- Photos
Redline Trailer Hubs and Drums - 84655UC1
- 6 on 5-1/2 Inch
- For 3500 lbs Axles
- Hub
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Standard
- L44649
- L68149
- Redline
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub assembly fits idler axles
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Sturdy iron construction
- Hub and drum are made in the USA
Specs:
- Application: 3,500-lb trailer axles with #84 spindles
- Wheel size: 14-1/2" to 16-1/2"
- Bolt pattern: 6 on 5-1/2"
- Grease cap flange diameter: 1.986"
- Wheel bolt diameter: 1/2"
- Weight capacity: 1,750 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
84655UC1 Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 6 on 5-1/2
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - 84655UC1
Average Customer Rating: 4.9 out of 5 stars (15 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Jeff P01/05/2015
These Dexter hubs always fit and work great. I use them on all the different trailers I build and have never had any issues.
by: Pat H12/29/2016
Fit was great and shipping was fast and on time. Only 4 stars because I was shorted a lug nut, which isn't that big of a deal. Other than that, good product.
by: Ryan09/28/2019
Super fast shipping, and quality item. Worked great!! I will definitely be a return customer.
by: Nikkolas02/25/2019
Exceptional customer service! Part initially arrived with a damaged grease seal due to shipping, not something I was too concerned with as I have spares. Customer services reached out to me and said they had mailed a replacement even though I hadn't asked. That is as good as it gets in my opinion.
by: Kenneth 09/07/2022
The product was exactly what I needed to fix a wore out hub on my trailer.
by: Alan 08/24/2022
Not to much to say about a hub. It is exactly what I ordered. Exact replacement. The big plus is the staff that got it shipped out quickly
by: David B.07/02/2015
Perfect service, great product had no problem getting the hub on. heading to the ocean thanks to etrailer anytime i need any part for my trailer will not hesitate to call or order from etrailer.
by: Zach02/24/2022
Fit perfect, quick shipping, trailer is back on the road.
by: VC06/04/2015
Great product and great price.
by: Cody 01/04/2022
Very good service had everything I needed in one shot! Fast delivery FREE and was very thankful for the follow up telling me my package was delivered and telling me they are there with any needs or concerns that I might have 5 star staff and quality.
by: Keith G.11/06/2016
Great information on website! Allowed me to determine what was needed. Great customer service and fast shipping. Definitely will be doing business with again.
by: James01/15/2014
Got the job done.
by: Danny A03/06/2017
Product was great! All work as it should thank you so very much.
by: Greh05/10/2021
by: Matt 11/03/2022
15
15
See what our Experts say about this Redline Trailer Hubs and Drums
- 6 Bolt Lug that Fits Timbren Axle Less Kit # ASR1THDS02The idler hub you are looking for that fits the Timbren Axle Less Kit part # ASR1THDS02 is the # 84655UC1. This is exact hub part number Timbren gave you.
view full answer... - What is the Hub Pilot Size and Grease Flange Size of the 84655UC1The grease cap flange diameter of the Trailer Idler Hub Assembly # 84655UC1 is going to be 1.986" and the outer diameter will be 3.09". The picture you're referring to does show the outside hub pilot diameter on this hub and not the grease cap flange diameter, but it might be confusing since the inside edge and outside edge of the hub kind of blend together because of the shading on the photo.
view full answer...
- Which 5 Lug and 6 Lug Hubs Use Inner Bearing # L68149 and Outer Bearing # L44649For a hub with a 5 on 4-1/2 inch bolt pattern you would want a Trailer Hub Assembly # 84545UC1-EZ. This hub uses a # L68149 as an inner and a # L44649 as an outer. For a hub with a 6 on 5-1/2 inch bolt pattern you would want a Trailer Hub Assembly # 84655UC1. This hub uses a # L68149 as an inner and a # L44649 as an outer. I attached a video on how to remove and install a trailer hub for you to check out also.
view full answer... - 2,200 lb Timbren Axle Less Kit Recommendation for Off Road Trailer with 6 Lug HubThe hub part # 84655UC1 is a 6 on 5-1/2 inch bolt pattern hub that fits the 2,200 lb Timbren Axle Less System part # ASR1THDS03. This Timbren kit also has a 4 inch lift and is spaced out for wider off-road tires.
view full answer... - Do you Carry 16 inch Wheels with a 5 Bolt Lug Pattern for a Cargo Trailer with 3,500 lbs AxlesAt this time we do not carry 16 inch wheels with a 5 bolt pattern or a lower profile tire. You would be best suited to stay with a 15 inch wheel and the highest rated tire available bias ply tire for 15 inch wheels, like the Karrier ST225/75D15 Bias Ply Trailer Tire - Load Range D, item # AM1ST96. This will give you a set of tires that are rated higher than the trailer axles so you will not have to worry about overloading the tires, unless the trailer itself is overloaded. Bias ply tires...
view full answer... - How to Find the Correct Replacement Hub for Boat TrailerIt is likely that Hub Assembly # 84655UC1 which you referenced is going to work for you, as it is for 3,500 lb axles and has a 6 on 5-1/2 bolt pattern, but there are steps you need to take to make sure. In order to find the correct hub assembly for your boat trailer, you can take a look at the assembly you have already removed and find the bearing numbers; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you would...
view full answer...
- Will 3,500 Pound Trailer Hubs Fit 1,000 or 1,750 Pound AxleThe 3,500 pound hubs # 84655UC1 use bearings # L68149 and # L44649 which are for a # 84 spindle. A # 84 spindle has the following measurements: A 1.75 inches B 1.73 inches C 1.38 inches D 1.06 inches E 1.00 inches If your current spindles have the same measurements and you currently have the same bearings these hubs will work for your trailer without getting a new axle.
view full answer...
- Dexter idler hub item # 84545BX Pilot Hole SizeThe pilot hole for the Dexter idler hub item # 84545BX is 2.59". I have attached a picture to show you the size of the pilot hole.
view full answer...
- Determining Correct Axle To Replace Older Axle W/ Obsolete LM11949 and LM67048 Bearing CombinationI may have a replacement axle option for you, but the # LM11949 and # LM67048 bearing combination your spindle has is not one that has been used for quite a while and there are currently no replacement hubs available that work with that combination. You may be able to find a used hub on a resell website. Your best bet would be replacing the entire axle with one that uses a more common bearing combination to make finding replacement parts now and in the future much easier. To determine...
view full answer...
- Parts Need to Build Off Road TrailerSquare axles can be tough to determine capacity, however the set up you reference above should be more than adequate for a towing weight of 1750 pounds. The TruRyde Spindle for Square Axles # TRU47FR, which you referenced, is a square spindle designed for 2 inch square axles and has a weight capacity of 1750 lbs, so it will work great for you. This spindle, # TRU47FR, is indeed compatible with Trailer Hub Assembly # 84655UC1, which you referenced. The hub assembly comes with the bearings,...
view full answer... - Can Trailer with 2-3/8 inch Diameter Axles have a 6 Lug Hub2-3/8 inch diameter axles are typically 3,500 lb capacity axles. There are 3,500 lb rated hubs that have a 6 on 5-1/2 inch bolt pattern like the part # 84655UC1 so your setup is very possible.
view full answer... - Compatibility Of 3500 lb EZ Lube Spindles And Dexter Hub AssembliesThe #84 EZ Lube Spindle # TRU74FR is compatible with hub assemblies # 84655UC1, however I recommend you use the Trailer Hub Assembly - 3,500-lb Axles - 6 on 5-1/2 - E-Z Lube # 84655UC1-EZ instead for easier access to your EZ Lube Spindle.
view full answer... - Can a Trailer Axle be Put On a Truck Bed to Make a TrailerFirst, I am pretty sure you don't have to change the axle out if you are making a trailer out of a truck bed. You will want to check the laws in your state/area though. The highest capacity straight axles that we carry are rated for 3,500 pounds which likely exceeds the capacity of the truck bed. For a trailer axle that will accept a hub with a 6 on 5-1/2 bolt pattern you could use # T3584F-8974 with hub # 84655UC1. Or EZ lube axle # T3584F-EZ-8974 with hub # 84655UC1-EZ. Both of these...
view full answer... - Diameter of Outside Center Hub Bore for Dexter 3,500 lb Idler Hub # 84655UC1 I went out to our warehouse to measure the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 # 84655UC1 for you. It has an outside bore diameter of 3.09 inches that the center of the wheel will fit over. I've attached a photo to assist. Most trailer wheels have a center bore of 3.19 inches, but as long as that center bore is larger it will work because trailer tires are centered on the lugs not the hub's outer bore. That center bore of the wheel is often covered with...
view full answer...
- 6 On 5-1/2" Idler Hub Assembly for Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 For the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 they use a larger spindle than the Trailer Idler Hub Assembly # 84655UC1 you found. Instead you will need the Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K and need to switch to the Grease Seal # GS-2125DL on the hub. This hub has the same 6 on 5-1/2" bolt pattern as the hub you found. The Timbren # ASR35HDS02 places the hub face 8" from the frame rail while the Timbren # ASR2KHDS02 places the hub face at 8-1/2" from...
view full answer... - Hub Recommendation for Use with Timbren Axle Less System part # ASR3500S06 The bolt pattern of 6 on 4-1/2 inch isn't a standard trailer bolt pattern so none of the hubs we offer will have it. You might want to double check the bolt pattern to see if maybe you have something different. I attached an FAQ article on determining bolt patterns for you to check out as well. If you have a 6 on 5-1/2 inch bolt pattern the hub part # 84655UC1 would work great as it would fit the Timbren Axle Less System part # ASR3500S06 is compatible with it.
view full answer... - Replacement Hubs for a 2003 Venture Boat Trailer Model 2250 with 6-Lug HubsI did a little research and found that your 2003 Venture Boat trailer model 2250 has a capacity of 2,250 pounds but the 6-lug hubs and bearing information I found indicate that it uses hubs normally seen on 5,200 pound axles. Since you have a boat trailer you might be interested in Kodiak hub # KH42655S which is stainless steel so it won't corrode. It uses inner bearing 25580 and outer bearing 15123. Another option is hub # 8-213-5UC1 which uses the same inner bearing but a different...
view full answer... - Diameter of Kodiak Rotor FlangeThe inside flange diameter of the rotor from the Kodiak Disc Brake Kit # K2R35DS measures 3-11/16" and the outside diameter of the Dexter Trailer Idler Hub # 84655UC1 measures 2", though please be aware that you should not drill a new wheel bolt pattern on the rotor; doing so would compromise the integrity of the rotor and would not be safe. What you need to do instead is either use a 12" rotor with a 6 on 5-1/2" bolt pattern such as # K2R526S or get a new idler hub assembly with a 5 bolt...
view full answer... - How to Find Replacement Hub for Mobile Home AxleIn order to find a replacement hub for your axle you will need to know the current bolt pattern, as well as the bearings and axle capacity. For example, the Trailer Idler Hub Assembly # 84655UC1 you looked at has a 6 on 5-1/2 bolt pattern and is for a 3,500 lb axle. It uses a # L68149 inner and # L44649 outer bearing. To find out which bearings fit your spindle you will need to remove your current hubs. You can look for part numbers on your existing bearings or measure using a digital...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Updated by:
DeAnne T
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Andrew L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vc
6/3/2016
Working perfectly