Which 5 Lug and 6 Lug Hubs Use Inner Bearing # L68149 and Outer Bearing # L44649

Question

Question:

Need to know what hub is needed the inner Bearing is a L68149 and outer is a L44649 not sure how many lugs this second but if you could send me part numbers for the 5 and 6 lug that would be perfect.

asked by: Trevor

0

Expert Reply:

For a hub with a 5 on 4-1/2 inch bolt pattern you would want a Trailer Hub Assembly # 84545UC1-EZ. This hub uses a # L68149 as an inner and a # L44649 as an outer.

For a hub with a 6 on 5-1/2 inch bolt pattern you would want a Trailer Hub Assembly # 84655UC1. This hub uses a # L68149 as an inner and a # L44649 as an outer.

I attached a video on how to remove and install a trailer hub for you to check out also.

expert reply by: Jameson C

0

Answer 1

The #25580 bearing and the #L68149 bearing that you referenced have different inner diameters. The #25580 bearing has an inner diameter of 1.750 inches. This bearing's application is as an inner bearing for a #42 spindle or as an outer bearing…

view full answer...

Answer 2

For a hub with a 5 on 4-1/2 inch bolt pattern you would want a Trailer Hub Assembly #84545UC1-EZ for an EZ lube axle or use #84545BX for regular axle. These hubs use a #L68149 as an inner bearing and a #L44649 as an outer bearing. They also include…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 5

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 6

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 7

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 8

Hello Jeffrey, While I'm sure we have a bearing kit for your car trailer, we don't have any way of knowing off-hand or cross-referencing what bearings you need. You mentioned you have them out, so you should be able to see the part number…

view full answer...

Answer 9

The etrailer axle part #e82GR can only be installed in an underslung orientation. Since the axle has a bow to it if you were to flip it the alignment would be way off. You'd have to weld spring seats on the opposite side of the axle with the part…

view full answer...

Which 5 Lug and 6 Lug Hubs Use Inner Bearing # L68149 and Outer Bearing # L44649

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching