6 On 5-1/2" Idler Hub Assembly for Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02
Question:
Question 1 - is the: Timbren Heavy-Duty Axle-Less Trailer Suspension - 4inch Lift Spindle - Off-Road Tires - 3,500 lbs Item # ASR35HDS02 compatible with: 84655UC1 Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 Question 2 - does the: Timbren Heavy-Duty Axle-Less Trailer Suspension - 4inch Lift Spindle - Off-Road Tires - 3,500 lbs Item # ASR35HDS02 have the longer Spindle Like the: ASR2KHDS02 Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Wide Tires - 2,000 lbs
asked by: Bo D
Expert Reply:
For the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS02 they use a larger spindle than the Trailer Idler Hub Assembly # 84655UC1 you found. Instead you will need the Trailer Idler Hub Assembly # AKIHUB-655-6-EZ-K and need to switch to the Grease Seal # GS-2125DL on the hub. This hub has the same 6 on 5-1/2" bolt pattern as the hub you found.
The Timbren # ASR35HDS02 places the hub face 8" from the frame rail while the Timbren # ASR2KHDS02 places the hub face at 8-1/2" from the frame. The Timbren # ASR2KHDS02 will use the Hub Assembly # AKIHUB-655-35-EZ-K if you determine this is the better option for your trailer.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Redline
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Q&A: Using Passenger Car Tires on Trailers
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Q&A: Adding Crossbars To A Teardrop Trailer
- Article: Best RV Roof Vents
- Q&A: Lock N Roll Articulating Coupler A-Frame Dimensions
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Timbren Axle-Less Suspension Kits with 4-Inches of Lift
- Q&A: Replacement Boat Trailer Seal for a NOK AD2527E Grease Seal
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height
- Article: How (and Where) to Connect an RV Propane Grill
- Article: Trailer Wiring Diagrams