Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Galvanized finish is great for marine use. E-Z Lube design simplifies lubrication. Trailer hub fits 2,200-lb idler axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and galvanized lug nuts included.
Features:
Specs:
This trailer hub assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer. All GAL-DEX hubs undergo a test in which they are sprayed with a 5-percent salt solution to determine corrosion resistance over time. These products are able to withstand 500 hours of constant exposure to the saltwater mist. This 500-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater
The E-Z Lube design of this assembly not only makes lubricating the bearings easy, but it also helps prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (41 Customer Reviews)
Galvanized finish is great for marine use. E-Z Lube design simplifies lubrication. Trailer hub fits 2,200-lb idler axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and galvanized lug nuts included.Dependable hub with the races already hammered in. This is key. Thank you for the fast service and quality parts.
I followed the recommendation from etrailsr and it did not work correctly now one is used
I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down).
Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!
Replaced the original hubs and bearings perfectly on 1994 trailstar bass tracker pro deep v17 trailer. Everything looks like quality parts. It would have been nice if a new castle nut and cotter pin had been included, I used my original nut and keepers. I would definitely recommend this
Orded Shipped and received fast! Thank you so much.
Had a grease cap damaged during shipment and etrailer got replacement parts shipped immediately. Great customer service
I've been purchasing from etrailer for over a decade. The 8-258-50UC1-EZ hub was just as described and works great!
Review is mostly for etrailer; the hubs have only been on the trailer for a coupla days. I got good, helpful info from the sales staff during the purchase and when I found that the grease seal on one of the hubs had lost its spring. They send out a replacement that day and I received it the next day. My experience so far with etrailer has been very good.
Direct replacement for Dexter H1062-3 hubs from a 1998 Tracker Trailstar trailer. If you dig around on the website you will find that when searching this old part number, that the recommendation is to order different rear seals due to a difference in ID measurements. I confirmed the seals I took off of the original hubs were 1.5"ID which come standard in this kit. Hopefully this review will help someone who finds themselves with the same question as I did.
I have an older trailer (2003) that needed new parts due to rust and corrosion. After a few questions and answers from the Etrailer experts I ordered the parts I needed and received them a few days later. Everything was correct and fit perfectly. The galvanized hubs look terrific and should last a long time. I now have a reliable trailer for many more years to come. The Etrailer experts make the difference.
Hubs were shipped in a timely manner and in good condition. The only complaint I have is one hub came with the wrong size of bearings, I ordered for a 1-1/16" axel but got bearings for1" axel. Using the hubs on a boat trailer and think they should work great.
The two trailer wheel hubs that I ordered in a timely manner. The quality was good, the price was good, and the service was excellent.
Replaced a set of ez line hubs that failed in less than one year....water intrusion. Price from etrailer was competitive and with free delivery, a real good deal. Package came fast, was well packed and all pieces fit perfect. Trying the zinc dipped hubs to see if they hold up better. Thank you etrailer!
Spoke with Adam who was very knowledgeable in helping me figure out which trailer hub I needed for my boat trailer .... received it quickly with fair shipping rates. Highly recommend etrailer.
Great replacement for the old rusted hubs and bearings. The trailer I picked up is now road worthy.
Great service, quick delivery, quality parts, good value!
Great quality in a replacement hub, as expected by this manufacturer. Shipped very quick from etrailer.
new hubs are much less work than driving out old bearing races & installing new ones. made for quick and simple install.
Competitive pricing, shipping time short, communication and tracking information very helpful, website information very useful for selecting proper parts and a followup email the same afternoon of the delivery.
Used these to replace the hubs on my snowmobile trailer. Excellent fit and easy to install.
Perfect set up for my application. Great product!
Fast delivery too.
This hub was exactly as I needed, and performs perfectly. It's nice to get such good service, and concern for their customers. Thanks Again
Gary W.
9/28/2017
hubs perform perfectly, no problems. Thank you for asking
Great customer service, product arrived in 3 days, as described. Used online videos to help installation. Will be back for next repair!
Excellent. Product. Easy installation and outstanding service.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin B.
4/25/2020
Rolling along as expected, thank you etrailer.