Dexter Trailer Idler Hub for 2,200-lb Axles - 5 on 4-1/2" - 1/2" Tapped Holes

Dexter Trailer Hubs and Drums - 008-258-04

Hub is designed for use on trailer idler axles. Fits 2,200-lb axles with BTR spindles. Races included. Tapped for 1/2" wheel bolts. For 13" to 15" wheels.

Features:

• Trailer hub fits idler axles
  • Races included
  • Tapped for 1/2" wheel studs
• Sturdy iron construction
• Hub is made in the USA

Specs:

• Application: 2,200-lb trailer axles with BTR spindles
• Wheel size: 13" to 15"
• Bolt pattern: 5 on 4-1/2"
• Wheel bolt hole diameter: 1/2"
• Weight capacity: 1,100 lbs

Bearing, Race, and Seal Information

• Bearings (sold separately)
  • Inner bearing: L44649 (1.063" inner diameter)
  • Outer bearing: L44649 (1.063" inner diameter)
• Races (included)
  • Inner race: L44610
  • Outer race: L44610
• Grease seal (sold separately): 10-9
  • Inner diameter: 1.5"
  • Outer diameter: 1.987"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

008-258-04 Dexter Trailer Idler Hub for 13" to 15" Wheels - 2.2K Axles - 5 on 4-1/2 - 1/2" Threaded Tap Holes