Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(169 reviews)
Price: $270.76
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 75305
Retail:$476.83
Our Price: $270.76
You Save: $206.07
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (169)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 75305
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 350 lbs TW
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Uses existing hardware
- Installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75305 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame
87719 Hidden Hitch Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2005 - 2006 Dodge Caravan with Stow-N-Go Seats
- 2005 - 2007 Dodge Grand Caravan with Stow-N-Go Seats
- 2005 - 2007 Chrysler Town and Country with Stow-N-Go seats
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Tech Tip
No drilling required for installation
California residents: click here
Complete Towing Package for 2006
Retail:$530.43
Package Price:$402.20
Customers Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Trailer Hitch Accessories
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Did not arrive in time
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75305
Average Customer Rating: 4.8 out of 5 stars (169 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Dave P.12/07/2013
2007 Dodge Grand Caravan
Delivery was ahead of schedule, customer service was incredible (Patrick B. and John H.) these guys went above and beyond. The video was a great help. I installed the hitch with my 7 year old grandson in about 1 1/2 hours. I used portable floor ramps and a creeper which gave me just enough room. The holes lined up perfectly on my 2007 Grand Caravan.
I highly recommend this product and company!
by: Allen08/04/2023
The hitch fit great. Being a Minnesota Van the factory hardware had some rust, but it still came apart easily. Tips are to raise the back up and place some jackstands under the rear axle. Use a floor jack to hold the hitch in place while bolting it up.
by: Giannis11/19/2021
The choice I made to buy from you was very good and I will do it again in whatever I need thank you
Giannis
11/28/2022
It is amazing
Giannis
1/5/2023
Amazing I am very lucky to have found you and purchased the hitch mount from you works excellent thank you guys
by: James T.05/11/2020
Hitch was easy to install per the provided instructions. I managed to install it by myself. Have used it many times without any problems. It fits nicely under the bumper.
James T.
5/18/2021
Exactly as expected! Havent lost my trailer yet:. My foot sensor for lift gate also continues to work after installing the hitch.
by: Louis01/03/2011
Town and Country hitch installedHere are some pics of my installation. Hard to take since the hitch is so hidden. Very satisfied with the product and the service. Installation went pretty well. Turned out that it was very important to get the hitch up as high as possible (and aligned on both sides with the bolt holes) before trying to get the bolts back in and to keep all bolts loose until they are all in. Took me a little longer than expected but then I wasn't working on a lift and I am in my early 60s. However, I am very satisfied.
James
3/24/2014
THANKS, I needed to know if it would work with the backuppark assist sensors !
by: Andy H05/17/2011
Haven't hing yet but install was a snap! Very solid product there were some scratches/chipped paint on hitch that is why 4 stars. Installed on 07 Town & Country alone with out raising the van. With help it's easily a 15 min job. Installed the hitch and T-one in an hour. Instruction videos are good. Next to tackle tranny cooler.
by: B. McKeel08/17/2017
2006 Dodge Grand Caravan
I love etrailer.com!
I am very pleased with their products, service, fast shipping and most of all their great installation video's! I have purchased from them before and plan on ordering again in the future!
by: Christopher06/28/2018
2006 Chrysler Town and Country
The hitch and wiring arrived just in ti me!
by: Robert09/30/2020
Website was easy to use and order through. Arrived as advertised. A clever use of the receiver hole to put instructions and parts. Was expecting a box but appears to have arrived in good order.
by: Nicole m02/14/2013
I was most impressed by the service and communication etrailer.com offered from the moment I ordered. I ordered a very expensive hitch and they had the best price out of everyone including Walmart. The stow and go makes my hitch one of the hardest to install and that was clear on all the instructions I saw here and on the other websites. But my mechanic got it on fine and it looks great! I got the 2" model and it doesn't stick out or look bulky in back at all. I was very happy and etrailer.com has my confidence to come back for all my trailer needs.
Nicole M.
2/14/2014
Thank you. I no longer own the vehicle but while I did have it I was very happy with it. I was also so impressed with your product, prices and service that I ordered my hitch for my new van from you. And once again, you delivered a great product at a great price. Thank you again! I will continue to recommend etrailers.com to anyone looking for your products.
by: Matt K. Three Rivers, MI06/29/2012
great design, bolted right in as promised. I would with no questions asked buy from etrailers again
by: Doug K06/28/2013
2005 Dodge Grand Caravan
This hitch fit onto my 2005 Dodge Gr Caravan perfectly. You will need ramps or some way to raise the rear of the vehicle. Etrailer sent me the correct product, with free shipping, very quickly. Thank you for your good service.
Doug K.
12/27/2014
excellent, I use it all the time, I put my Yakima bike carrier in it a lot, one year in, the hitch is still 100 solid, despite rough weather and heavy use, your installation videos make self-install possible, saving a lot of money there too
by: Randy 03/24/2023
The hitch was right on. I will be buying from you later on.
Will was excellent to work with. Give that boy a raise.
by: Andy M.05/24/2011
Product fit very well. Installation was easy except for one non-serious issue.
I am a backyard mechanic and don't have a lift available or any assistants to help me. When I jacked my van up to install, I jacked it up on the rear axle with one jack at each wheel. This was not a good idea because I couldn't get the hitch at enough of an angle to slip it into place. To remedy I just jacked the vehicle by the jacking points. Therefore the wheels and axles and springs just hung down and presto, it was easy to position the hitch for installation.
by: Larry G.06/01/2017
I was very pleased with the Draw-Tite hitch for my 2007 T&C van. It mounted as per instructions with no problems. I mounted it myself but a second person would be nice. If you do it yourself cribbing material is useful to help support the hitch at various areas during installation. It's important that you jack the vehicle up at the body jacking points so as to get the top of the springs with more room. I like the way the Draw-Tite tucks up. Looks good. etrailer did good for me.
by: Bradley05/06/2016
2005 Chrysler Town and Country
Great purchase! Easy install! Highly recommended!
by: Josh09/18/2016
Product worked as advertised. Fit well and the installation videos were a great help! Installed with confidence! Great value and a great company!
Josh
10/18/2017
Thank you for the follow-up. It is greatly appreciated. Both the trailer and the harness are working great. Any trailer hitch needs I have I will becoming to you first. Thanks again!
by: Don L.06/20/2016
2005 Chrysler Town and Country
I received the hitch and taillight wiring in good time. (This review is for 2 items purchased at the same time.) The video(s) help a lot and made hitch installation in less than an hour. The taillight wiring kit was also very easy and took about 30 minutes. Very very glad that I made this purchase and will do it again for my next vehicle. Good products!
by: Jay09/13/2022
Hitch was very difficult to install, partly due to not receiving 2 spacers, which were not received until about a month after I had completed the installation. If I'd had those spacers, the installation would have went much easier, and complete.
by: Bob R05/31/2014
Nissan Leaf
Pretty well made. Doesn't stick out past bumper; yea! On line video is a little sketchy on some details-- the most important to me is that only the forward (one hole, gets larger bolt) mounting flange goes above the leaf spring. Be prepared to figure out some leverage to make some holes line up. Helper very important.
Wiring harness had better video and instructions.
by: Allan K. Green07/22/2012
Chrysler Town & Country
Having purchased a camper intended to be towed by our Chrysler T&C van, my major concern was finding a trailer hitch to fit our van that I could obtain and install myself in the few days before our camping trip. e-Trailer provided the solution: easily searchable site, expert pre-sale advice, quick delivery, post-sale installation help, and the job is done with a day to spare. If it were not for some installation glitches, my review would be "excellent", but there is room for improvement in the installation instructions, particularly the plug-n-tow wiring.
1. For the hitch itself, my biggest problem for the first 10 minutes was trying to find a socket that fit the spring-hanger bolts. I finally read the instructions more closely and learned that I needed a 15mm and an 18mm socket, which fortunately I had. I found that it is necessary to both read the brief instructions AND watch the appropriate video. In my case, this required several trips back and forth between my barn and my office to review the video when the instructions were unclear.
2. No useful wiring instructions were included with my wiring package. After calling in, I was referred to instructions for an alternate product, but neither the video nor the documentation were accurate in all respects. And, most annoying, part #42235 didn't install per the instructions: there is, for example, no stand-alone ground wire to screw anyplace; there is insufficient wire length to allow storage of the plug in the jack compartment; and it will probably be necessary to buy a 4-pin extender to actually use the plug.
But, all in all, I got the job done. Everything works, so thank you!
2. No useful wiring instructions were included with my wiring package. After calling in, I was referred to instructions for an alternate product, but neither the video nor the documentation were accurate in all respects. And, most annoying, part #42235 didn't install per the instructions: there is, for example, no stand-alone ground wire to screw anyplace; there is insufficient wire length to allow storage of the plug in the jack compartment; and it will probably be necessary to buy a 4-pin extender to actually use the plug.
But, all in all, I got the job done. Everything works, so thank you!" />
by: S. Macchiaverna09/03/2020
Ultimately looks good! Took 1hr 10min to install.
Needed crow bar to line up bolts.
by: Edwin 12/09/2021
2007 Dodge Grand Caravan
Perfect fit on my 2007 Dodge Caravan. This trailer hitch was installed without any issues. At present I use it several times a week between a utility trailer and my boat trailer. Would recommend to anyone wanting to DIY install.
by: john weekes03/08/2012
i am sorry it took me so long to install your product. i am 74 years young, a service connected disable american veteran. we findly had a nice day, 70 degrees, for me to lay on the warm ground and install the tow system. your instructions for installation were very easy to understand and follow. the tow system was a little heavy for an old man, but this older man prevailed. the tow bar was a perfect fit. took me about 45 minutes to install. thank you for a tow system that is perfect for me. i hope i get the oppertunity to recommend your company. john
25
171
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- What Trailer Hitch Will Fit On A 2007 Grand Caravan With Stow-N-GO SeatingYou will need the Hidden Hitch Trailer Hitch, # 75305, which will work on the 2007 Dodge Caravan with Stow-N-GO seating. It is a Class III hitch and has a towing capacity of 3,500 lbs. with a tongue weight of 350 lbs. On the 2007 Dodge Caravan with Stow-N-GO seating the Hidden Hitch Trailer Hitch, # 75119, that you have referenced will not work. Also needed is a Curt Ball Mount, # C45010, a Pin and Clip, # PC3, and a hitch ball. The hitch ball you need will depends on the size of the...
view full answer... - Can a 2007 Chrysler Town and Country Tow a 19 Foot Long BoatThe Draw-Tite Max-Frame Trailer Hitch Receiver part # 75305 which is a fit for your 2007 Chrysler Town and Country would be okay for a 19' long boat so long as that weight of that boat does not exceed 3,500 lbs or lower if the vehicle is rated for less (see owner's manual page 368). The length of a trailer does not have much to do with whether or not a certain trailer hitch can handle it. If your boat is under 3,500 lbs or what the vehicle specifics then you are also going to need a trailer...
view full answer... - Would a Hitch from a 2000 Dodge Grand Caravan fit a 2005 Grand CaravanThe hitch that fits a 2000 Doge Caravan like the # 87717 that you referenced only fits up to 2004 Grand Caravans. You would need to go with the part # 75119 for if you do not have the Stow n Go seats or part # 75305 for if you do. For trailer wiring you would want the part # 118300. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop....
view full answer... - Is Bumper Removed On Install Of Draw-Tite Trailer Hitch, # 75305, On 2007 Chrysler Town And CountryTo install the Draw-Tite Trailer Hitch, # 75305, on your 2007 Chrysler Town and Country with Stow and Go it does not require the bumper to be removed. You would remove 3 bolts on each side of the vehicles frame. Before installing the hitch it is recommended to clean the corrosion from the weld nuts on the frame, that the bolts were attached to with a Battery Post and Terminal Cleaner, # DW00254. Then spray them with LubriMagic Green Series Biobased Spray Lubricant, # L10442 to help lubricate...
view full answer... - 2007 Town and Country Touring Limited Edition Trailer Hitch and Wiring RecommendationFirst thing you will need is a trailer hitch on your 2007 Chrysler Town and Country. For that you would want the part # 75305 for if you have stow and go seats or part # 75119 for if you do not. You will want trailer wiring as well. For that you would want the part # 118300 to give you a 4-way. Now to convert this to a 7-way so that you can install a brake controller which will activate the brakes of the trailer you would want the part # ETBC7. For a brake controller I would recommend...
view full answer... - Where to Find Hitch Hardware Torque Specs for Draw-Tite Hitch for 2005 Chrysler Town and CountryI'm assuming you're speaking of the Draw-Tite Class III, part # 75305. We don't publish the torque ratings, because the manufacturer can change them over time, but in the current instructions which I've linked for you, the torque specs for the existing M10 and M12 bolts are listed right after step # 4 of the installation instructions. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118300, a ball mount like # D-28 a hitch pin like # PC3 and a # 19260...
view full answer... - Trailer Wiring and Hitch Recommendation for a 2007 Chrysler Town and CountryFirst lets start with a hitch for your 2007 Town and Country. If you have stow and go third row seats you would want the part # 75305, or if you do not have the stow and go seats part # 75119. I attached install videos for both hitches. For wiring you will want to first start with a 4-way. For that you will want the part # 118300. Now to convert it to a 7-way so that you can run a power wire to the trailer you will need the part # 37185. This will plug into the 4-way and then you will...
view full answer...
- Towing Capacities and Trailer Hitch/Wiring Recommendations for a 2005 Chrysler Town and CountryThere are a couple of weights to look at when determining how much trailer your 2005 Chrysler Town and Country can tow. First you need to consider the towing capacity of the vehicle itself or the gross trailer weight capacity listed for the vehicle. Additionally, Chrysler has a frontal area maximum that the trailer can have. They say that the front of the trailer cannot exceed 40 square feet. So if the trailer is 8 x 5 feet at the front or 10 x 4 feet, or any combination that adds up...
view full answer...
- Class III Hitch for 2005 Chrysler Town and Country with Stow and Go SeatsWe have a hitch for that vehicle. For the 2005 Chrysler Town and Country with the stow and go seats, I would recommend the Draw-Tite Class III Hitch, part # 75305. We have a video showing the installation of this hitch, I will provide a link to the video below.
view full answer... - Hitch Recommendations for 2005 Chrysler Town and Country w/ Stow and Go SeatsWhen you search by vehicle, the page you'll be taken to has a drop down menu at the top where you can choose Town and Country models 'with Stow-N-Go seats' or 'without Stow-N-Go seats'. The Draw-Tite Class III receiver hitch, part # 75305 would make a good choice. The hitch is indeed compatible with vehicles with stow-n-go seating. If you'll be using the hitch for towing, you'll need the following to complete your towing set-up: Trailer wiring harness with 4-pole trailer connector, part...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2007 Dodge Grand CaravanA step bumper hitch cannot be used on your 2007 Dodge Grand Caravan. For a Class III hitch I recommend the Draw-Tite # 75305. Then for wiring you will need the Tekonsha T-One Vehicle Wiring Harness # 118300. If you're also in need of a ball mount you can use the # D-4 along with the # 63845 for a 2" ball or # 19260 for a 1-7/8" ball.
view full answer... - Complete Towing Package For A 2005 Dodge Grand CaravanAlthough not always necessary, it is always a good idea to upgrade the vehicle for towing a heavy load for an extending period of time. In order to tow a 16' camper that weighs roughly 2,500 lbs. when dry, with a 2005 Dodge Grand Caravan, I recommend using suspension enhancements, upgraded transmission cooler, Class III hitch receiver, sway control, brake controller, and weight distribution if the gross trailer weight (GTW) is more than 50% of the gross vehicle weight rating (GVWR). I will...
view full answer... - Trailer Hitch for a 2005 Chrysler Town and CountryFor your 2005 Chrysler Town and Country with Stow and Go seats I recommend going with Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75305. With a 2" receiver tube opening there are a lot more option for accessories. Keep in mind that the hitch does not determine the towing capacity of your vehicle. Always go with the lowest number between the hitch and the vehicle. To help get you on the road pulling a trailer safely I recommend T-One Vehicle Wiring...
view full answer... - Frame Bolts Used to Install the Draw-Tite Hitch on a 2007 Dodge Grand CaravanAs you mentioned, the installation of the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75305 requires that you reuse two M10 and M12 bolts that should already be present in the frame rail. The only information I have on these bolts is just that, the diameter. I unfortunately do not have any additional info that pertains to thread pitch and length. However, if you speak to the parts rep at the dealer then I am sure they would have this info and a part number for you. I would try to...
view full answer... - How Much Does Draw-Tite Trailer Hitch 75305 Weigh Installed on a 2006 Chrysler Town & CountryThe shipping weight of Draw-Tite trailer hitch # 75305 is 48 pounds. That includes the packaging so the hitch itself weighs approximately 46 pounds. If you plan on doing some towing with your 2006 Chrysler Town & Country the recommended ball mount is # 36071. It comes with a pin and clip. Then for a 2 inch ball, you can use # 19258. And for trailer wiring you can use wiring harness # 118300 to add a 4-Way flat connector to the rear of the vehicle.
view full answer... - Can a 2007 Chrysler Town & Country Van Pull a 2010 Lark 7x16 TrailerThe towing weight capacity of your 2007 Chrysler Town and Country ranges from 1,700 lbs to 3,800 lbs depending on what your Town and Country is equipped with. You can consult your owner's manual to find out your specific towing weight capacity and if you don't know what your Town and Country is equipped with you can take your VIN to a dealership and they can let you know. Since the trailer that you are interested in looks like it could have a Gross Vehicle Weight rating (GVWR) of up to...
view full answer... - Trailer Hitch Fits for 2005 and 2014 Dodge Grand CaravansThe 2005 and 2014 model years of the Dodge Grand Caravan are parts of different generations of this vehicle and this means that there are no common hitch fits between them. I checked every hitch offered for both vehicles and none share fits. Please refer to the links provided. Sorry for that bit of bad news but we can still help you choose a new hitch for the 2014. You have a choice of either 1-1/4-inch Class II or 2-inch Class III hitches for the 2014 Grand Caravan that can be seen on...
view full answer... - Should Trans Cooler or Suspension Enhancement be Used for Towing with 2007 Chrysler Town and CountrySince you will be pushing the towing limits of your 2007 Chrysler Town and Country it would be a good idea to use an additional transmission cooler as well as a weight distribution (WD) system to help level your entire towing setup. The WD system will actually do a better job at leveling your towing setup than suspension enhancement will. For a transmission cooler I recommend the Derale Series 9000 Plate-Fin Transmission Cooler Kit # D13614 because it is a Class V plate-fin cooler which...
view full answer...
- Trailer Hitch Recommendation for a 2005 Chrysler Town and Country LX with Stow and GoThe trailer hitch that I would recommend for your vehicle is the Draw-Tite Class III Trailer Hitch, # 75305. This is a class III trailer hitch that has a 2 inch receiver. Having a trailer hitch with a 2 inch receiver will allow you to choose from a wider variety of hitch mounted accessories. I have attached the installation instructions and an installation video of this trailer hitch for you to check out.
view full answer... - Recommendations for Towing a Pop Up Camper with a 2005 Dodge CaravanYou will need to check your owners manual, or with the Chrysler dealer to determine the towing capacity of your 2005 Dodge Caravan. Once you know the capacity of the vehicle you will need to find a camper that weighs less than the vehicles maximum towing capacity, when fully loaded, to safely tow the trailer. If you need a hitch for your Caravan, I would recommend the Draw-Tite Class III Trailer Hitch, item # 75119, if your vehicle does not have stow-n-go seating. If you do have stow-n-go...
view full answer... - Class III Trailer Hitch Receiver For a 2006 Dodge Grand Caravan With Stow-N-Go SeatingYes, there is a 2" class III receiver available for your 2006 Dodge Caravan with the Stow-N-Go seating. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75305. This receiver is rated for 350lbs of tongue weight and 3,500lbs total trailer weight. With a weight distribution hitch ratings are increased to 400lbs of tongue weight and 4,000lbs trailer weight. Be sure to confirm your maximum tow ratings with a Dodge dealer. The Tekonsha T-One Vehicle Wiring Harness # 118300 will...
view full answer... - Trailer Hitch and Wiring Recommendation for 2005 Chrysler Town and CountryMost versions of the 2005 Chrysler Town and Country did not leave the factory with a tow package installed. You'd want to start with a hitch like part # 75305 for if you have the Stow n Go Seats or part # 75119 for if you did not have the Stow n Tow seats. For trailer wiring you'd then want the part # 118300. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a...
view full answer... - Trailer Hitch Recommendation for a 2006 Chrysler Town and Country with Stow and Go SeatsThe most popular trailer hitch for a 2006 Chrysler Town and Country with Stow and Go seats is the Draw-Tite Trailer Hitch, # 75305. This is a 2 inch trailer hitch and the Thule Apex 2 Bike Carrier, # TH9024XT, will fit. With the trailer hitch installed the center of the hitch pin hole out to clear the rear bumper is approximately 6-1/2 inches. On the bike rack, the center of the hitch pin hole to the nearest part of the rack is 12 inches. So it should clear the the rear bumper. The back...
view full answer... - Draw-Tite Hitch Recommendation for a 2005 Dodge Grand CaravanYes, the Draw-Tite Trailer Hitch # 75305 that you referenced will work on your a 2005 Dodge Grand Caravan with Stow-N-Go seats. Check out the installation video and instructions for this product that I attached for you. To complete your towing setup you may be interested in the following products: etrailer.com Ball Mounts # EBMK4 Tow Ready Custom Fit Vehicle Wiring # 118300 (installation video and instructions attached for this product also)
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Brent H
Expert Research:
Mike L
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Mike H
Video Edited:
Chris R
Video by:
Andrew K
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave P.
12/7/2014
Still satisfied! No issues.