T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(308 reviews)
Price: $32.33
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118300
Retail:$53.60
Our Price: $32.33
You Save: 40%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (308)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118300
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind tail lights
- Plug in T-connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once installation is complete, the 4-way flat connector will be stowed in the jack storage compartment of your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118300 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
This Product Fits The Following Vehicles
- 2004 - 2004 Dodge Caravan
- 2004 - 2007 Dodge Caravan
- 2005 - 2006 Dodge Caravan with Stow-N-Go Seats
- 2005 - 2007 Dodge Caravan without Stow-N-Go seats
- 2004 - 2004 Dodge Grand Caravan
- 2004 - 2007 Dodge Grand Caravan
- 2005 - 2007 Dodge Grand Caravan with Stow-N-Go Seats
- 2005 - 2007 Dodge Grand Caravan without Stow-N-Go seats
- 2004 - 2004 Chrysler Town and Country
- 2004 - 2007 Chrysler Town and Country
- 2005 - 2007 Chrysler Town and Country with Stow-N-Go seats
- 2005 - 2007 Chrysler Town and Country without Stow-N-Go seats
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Defective
- Wrong item was ordered
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118300
Average Customer Rating: 4.9 out of 5 stars (308 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Bruce05/20/2023
The wiring harness went about as well as can be expected. I was able to use the existing grounding stud the original harness is connected to. Also, I found it far more convenient to route the trailer portion of the harness to the passenger side and drape it into the well for the "stow and go" seats.
by: Ray B. De.04/17/2013
2005 Dodge Grand Caravan
Product was received quickly and besides the installation instruction sheet the video that I watched for install was most helpful. Had the wiring installed within 45 minutes and tested and everything worked great from the start. Will definitely consisted buying from Etrailer again.
by: Allen 08/04/2023
The harness is fairly easy to install. The passenger side alittle more difficult, but I used the tip of a fishing pole to guide the wires out. Follow the video instructions. Also big shout out to etrailer.com customer service. This is the second harness. The first one must have had a defect and was causing a dash fuse to pop when the brake was pressed. Etrailer.com shipped out another one and it works perfectly.
by: Roger K08/18/2011
This was the simplest installation of any wiring project I've undertaken. Instructions were simple and straight forward and it works great. The best part is the wife had no idea I even installed it until I had her check the trailer lights. Thank you for a great product.
by: Hector 06/03/2023
The hitch was a bit tough to install without some trimming and slotting of a couple of holes. However at the end it worked. I was able to accomplish my mission. The harness was actually a very easy and comprehensive installation and it worked like a charm. The customer service was excellent and items where shipped on time. UPS however was not so on top of their game. I do recommend e trailer and will definitely purchase again. Thank you
by: Glynn04/24/2022
The wiring harness worked great! Easy to install with easy-to-follow instructions.
Edwin W.
4/25/2023
Great!
by: Andy H05/17/2011
Haven't used it yet but it is an awesome product. Installed this and a hitch on my 07 Town & Country alone in an hour. Installation videos made it a breeze. Thanks Etrailer.com! Next to tackle a tranny coolet.
by: Linda B04/06/2020
I was only able to use my tent/trailer twice last year but I loved it. It was exactly what I had hoped it would be.
by: Donald06/07/2023
Excellent fit . It took me about a hour to install on a 2005 Chrysler town and country stow-n-go van .I installed by myself using 2 Jacks.
Quality work it fit perfectly.
And by the way I'm 71 years all , it took me longer to get up to move side to side then to install lol .
by: Cesar 03/29/2023
The wire harness works perfectly, no problem what so ever after a year install it.
by: B.McKeel08/17/2017
2006 Dodge Grand-Caravan
Great service, great product, fast shipping and most of all the very informative installation video's!
by: Glenn 05/14/2023
2005 Dodge Grand Caravan
Plugged right into existing light harness... Etrailer video of install was a great help.
by: Terry Powell11/25/2016
2005 Dodge Grand Caravan
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
Terry P.
12/11/2017
The products are great and working just fine!!!
by: Rick C.03/23/2019
Delivered on time, exactly what I needed. Total install time was 20 minutes, took longer to glue the carpet back in my cargo van.
by: Robert 04/19/2023
The wiring Harness was very easy to ins tall!
by: Keith A09/20/2013
2005 Chrysler Town and Country
This product was installed easily. The video was GOOD and expedited installation. I did find an appropriate location to drill a hole in the "seat well" on my 2005 Town and country. The electrical connection is directly by the receiver and on the outside of the vehicle now. A little caulk resealed the hole. NICE!
Keith A.
9/20/2014
this product has preformed perfectly for the past year. I drilled a hole in the seat well to put the wiring through. NO problems!
by: Greg01/08/2016
This is so easy compared to 20 years ago when you had to cut, soldier, tape, repeat because you read the meter wrong. I use a 7 pin plug so I cut the end off and finagled the wires under the car and mounted the plug on outside of van. If I did not do that it would have taken me more time to take the tail lights off than install the wiring. Super easy. AND BTW, it drives me crazy when I see these 4 pin plugs just hanging there like a cat toy. etrailer sells the 4 pin plug mounting brackets to make the job look more professional. Just to let y'all know.
by: John07/12/2016
Dodge Grand Caravan
The wiring harness for our Dodge Caravan was a PERFECT fit. Installation was simple and required no alteration of the vehicle. Easy to follow instructions made the job a snap. The trailer connector is plenty long and stores inside the tire jack compartment. Took me less than an hour start to finish with one beer break and I wasn't in a rush.
by: Guy05/16/2016
The trailer hitch wiring harness came with good instructions, and etrailer.com's website provided links to helpful videos. The installation was very easy, and the finished product works well. The tips for hiding the connector in the jack compartment were much appreciated.
by: Jesse E05/29/2012
2005 Dodge Grand Caravan
I got a 2005 Grand Caravan SXT with the trailer tow package but it had no trailer wiring. I was thinking of going to Uhaul to install wiring but I wondered if I can do it myself [to save money]. I found etrailer's Install Video on Youtube, and then bought this kit. Before buying the kit I checked the DODGE OEM kit and wiring in the service manual and the etrailer kit installed the same - both tapped the wires going to the rear lights. But the etrailer kit was better than the oem kit - longer wires.
Installation was like in the etrailer video, but I had trouble with the ground wire on the right light. At first I thought I didn't need it but without ground the lights / signals don't work, as verifed by an LED tester kit [don't forget to buy this also]. So I had to buy a $3.80 punch to tap a hole for the ground screw. Once grounded the trailer wiring worked fine. I'm so glad I did this myself!
by: Jim D09/22/2018
Dodge
Perfect fit on the part, excellent installation videos, and I now have a working trailer lights on my utility trailer when towing with my Dodge minivan.
I went with this part because it plugs into the taillight wiring connectors of my van. No cutting wires or messing with terminals. Very happy with the result.
by: Vik C.05/10/2020
I purchased the wiring harness one year ago and am totally happy with the ease of installation and its performance. The instruction video was an added plus although probably not needed given the clear and complete written instructions. It is a rare occurrence this can be said about ANY products at this point in time. Tekonsha got it right on every aspect! Thank you for making my life a whole lot easier. Kind regards.
by: john doe04/19/2016
2006 Dodge Grand Caravan
Recently bought the wiring harness for hookup between vehicle and trailer for a 2006 Grand Caravan... The kit 118300 worked perfectly. Took me about a hour and 1/2 from start to finish due to a error on my part. As a point of information ...a cut and 1 end bent into a small J- hook metal coat hanger works very well for helping pull wires thru.
by: Bonnie08/20/2016
2001 Chevrolet Suburban
Great service and shipping and handling. The only thing that didn’t work for me was the wiring harness but that was my fault. So if your vehicle has led taillights make sure you get the t wiring harness for led taillights .
by: Peter K03/22/2017
2007 Chrysler Town and Country
Purchased wiring harness to outfit our T&C that came with a hitch, but no lighting cable. Took a little time and effort, but installed without a hitch (pun intended). Would not have been easy without installation videos and excellent instructions.
Thanks!
25
308
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Can a 2007 Chrysler Town & Country Van Pull a 2010 Lark 7x16 TrailerThe towing weight capacity of your 2007 Chrysler Town and Country ranges from 1,700 lbs to 3,800 lbs depending on what your Town and Country is equipped with. You can consult your owner's manual to find out your specific towing weight capacity and if you don't know what your Town and Country is equipped with you can take your VIN to a dealership and they can let you know. Since the trailer that you are interested in looks like it could have a Gross Vehicle Weight rating (GVWR) of up to...
view full answer... - Draw-Tite Hitch Recommendation for a 2005 Dodge Grand CaravanYes, the Draw-Tite Trailer Hitch # 75305 that you referenced will work on your a 2005 Dodge Grand Caravan with Stow-N-Go seats. Check out the installation video and instructions for this product that I attached for you. To complete your towing setup you may be interested in the following products: etrailer.com Ball Mounts # EBMK4 Tow Ready Custom Fit Vehicle Wiring # 118300 (installation video and instructions attached for this product also)
view full answer... - Trailer Wiring Harness for a 2005 Dodge Grand Caravan SXT with Stow-n-Go SeatingThe wiring harnesses for the 2005 Dodge Grand Caravan like # 118300 install in line with the tail light wiring on the vehicle. I have included a link to the instructions and a link to a video that shows a typical installation for you. A wiring harness that connects to a special harness as part of a tow package is not available. Some tow packages include different suspension, transmission cooler, a different gearing in the transmission, or any number of things. Each manufacturer does it...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2007 Dodge Grand CaravanA step bumper hitch cannot be used on your 2007 Dodge Grand Caravan. For a Class III hitch I recommend the Draw-Tite # 75305. Then for wiring you will need the Tekonsha T-One Vehicle Wiring Harness # 118300. If you're also in need of a ball mount you can use the # D-4 along with the # 63845 for a 2" ball or # 19260 for a 1-7/8" ball.
view full answer... - Towing Capacities and Trailer Hitch/Wiring Recommendations for a 2005 Chrysler Town and CountryThere are a couple of weights to look at when determining how much trailer your 2005 Chrysler Town and Country can tow. First you need to consider the towing capacity of the vehicle itself or the gross trailer weight capacity listed for the vehicle. Additionally, Chrysler has a frontal area maximum that the trailer can have. They say that the front of the trailer cannot exceed 40 square feet. So if the trailer is 8 x 5 feet at the front or 10 x 4 feet, or any combination that adds up...
view full answer...
- Hitch Recommendations for 2005 Chrysler Town and Country w/ Stow and Go SeatsWhen you search by vehicle, the page you'll be taken to has a drop down menu at the top where you can choose Town and Country models 'with Stow-N-Go seats' or 'without Stow-N-Go seats'. The Draw-Tite Class III receiver hitch, part # 75305 would make a good choice. The hitch is indeed compatible with vehicles with stow-n-go seating. If you'll be using the hitch for towing, you'll need the following to complete your towing set-up: Trailer wiring harness with 4-pole trailer connector, part...
view full answer... - All Parts Needed to Tow With a 2007 Dodge Grand CaravanI can give you all the parts needed, including the wiring, transmission cooler and suspension enhancement so you can safely tow with your 2007 Grand Caravan with Stow-N-Go seats. For a trailer hitch you can use the Class III Draw-Tite # 75305 which is a bolt-on installation and has a 2" hitch; I've added a photo showing you how the hitch looks when installed on an '07 Grand Caravan. Since you need a ball mount I recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and...
view full answer...
- 2007 Town and Country Touring Limited Edition Trailer Hitch and Wiring RecommendationFirst thing you will need is a trailer hitch on your 2007 Chrysler Town and Country. For that you would want the part # 75305 for if you have stow and go seats or part # 75119 for if you do not. You will want trailer wiring as well. For that you would want the part # 118300 to give you a 4-way. Now to convert this to a 7-way so that you can install a brake controller which will activate the brakes of the trailer you would want the part # ETBC7. For a brake controller I would recommend...
view full answer... - How Much Does Draw-Tite Trailer Hitch 75305 Weigh Installed on a 2006 Chrysler Town & CountryThe shipping weight of Draw-Tite trailer hitch # 75305 is 48 pounds. That includes the packaging so the hitch itself weighs approximately 46 pounds. If you plan on doing some towing with your 2006 Chrysler Town & Country the recommended ball mount is # 36071. It comes with a pin and clip. Then for a 2 inch ball, you can use # 19258. And for trailer wiring you can use wiring harness # 118300 to add a 4-Way flat connector to the rear of the vehicle.
view full answer... - Class III Trailer Hitch Fit for 2006 Dodge Caravan Without Stow and Go SeatsAlthough we do indeed have hitches that will fit your 2006 Dodge Caravan, the # 13037 you'd mentioned only fits the 2nd generation vehicle (1991-1995). For your 4th generation 2006 Caravan, I'd recommend the Draw-Tite Class III receiver hitch, part # 75119 which you can see being installed by clicking the provided video link. If you'll be towing with the hitch, you'll also need a # 118300 trailer wiring harness (video also linked), a ball mount like # C45070 and for a 1-7/8 inch trailer...
view full answer... - Class III Trailer Hitch Receiver For a 2006 Dodge Grand Caravan With Stow-N-Go SeatingYes, there is a 2" class III receiver available for your 2006 Dodge Caravan with the Stow-N-Go seating. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75305. This receiver is rated for 350lbs of tongue weight and 3,500lbs total trailer weight. With a weight distribution hitch ratings are increased to 400lbs of tongue weight and 4,000lbs trailer weight. Be sure to confirm your maximum tow ratings with a Dodge dealer. The Tekonsha T-One Vehicle Wiring Harness # 118300 will...
view full answer... - Trailer Hitch for a 2005 Chrysler Town and CountryFor your 2005 Chrysler Town and Country with Stow and Go seats I recommend going with Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75305. With a 2" receiver tube opening there are a lot more option for accessories. Keep in mind that the hitch does not determine the towing capacity of your vehicle. Always go with the lowest number between the hitch and the vehicle. To help get you on the road pulling a trailer safely I recommend T-One Vehicle Wiring...
view full answer... - Where to Find Hitch Hardware Torque Specs for Draw-Tite Hitch for 2005 Chrysler Town and CountryI'm assuming you're speaking of the Draw-Tite Class III, part # 75305. We don't publish the torque ratings, because the manufacturer can change them over time, but in the current instructions which I've linked for you, the torque specs for the existing M10 and M12 bolts are listed right after step # 4 of the installation instructions. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118300, a ball mount like # D-28 a hitch pin like # PC3 and a # 19260...
view full answer... - Trailer Hitch Receiver Fit For 2005 Chrysler Town and Country With Stow-N-Go SeatsThere is a trailer hitch receiver fit for your 2005 Chrysler Town and Country with Stow-N-Go seats: - etrailer Trailer Hitch Receiver # e39KR I verified for you that this is the correct fit for the Stow-N-Go seating on your Town and Country, and does not require any drilling or other modification to install. The only other thing you may need, if you plan on doing some towing, is a trailer wiring harness. The correct fit for your '05 Town and Country is the T-One Vehicle Wiring Harness...
view full answer... - Recommendations for Towing a Pop Up Camper with a 2005 Dodge CaravanYou will need to check your owners manual, or with the Chrysler dealer to determine the towing capacity of your 2005 Dodge Caravan. Once you know the capacity of the vehicle you will need to find a camper that weighs less than the vehicles maximum towing capacity, when fully loaded, to safely tow the trailer. If you need a hitch for your Caravan, I would recommend the Draw-Tite Class III Trailer Hitch, item # 75119, if your vehicle does not have stow-n-go seating. If you do have stow-n-go...
view full answer... - Will Draw-Tite 75305 Class III Trailer Hitch fit 2007 Dodge Caravan with Back Up SensorThe Draw-Tite # 75305 Class III Trailer Hitch will fit the 2007 Dodge Grand Caravan with Stow-N-GO seating and a factory backup sensor with no problems. If you have an aftermarket backup sensor then you will have to make that determination, and possibly reposition the sensor to install the hitch. I've linked to an install video and the instructions so you can see where the hitch sits on the vehicle. You can compare the positioning of the hitch to the location of the sensors. If you'll...
view full answer... - Availability of Trailer Wiring Kit 118300 for 2005 Dodge Grand CaravanWe do carry the Tekonsha trailer wiring harness part # 118300 still. You can follow the product link below or click the hyperlink # 118300.
view full answer... - Trailer Hitch That Fits 2007 Dodge Caravan Without Stow-N-Go SeatsThe Curt Trailer Hitch Receiver # C13362 will fit your 2007 Dodge Caravan that does NOT have Stow-N-Go seating as long as it is NOT a Sport model; this is a Class III hitch with a 2 inch receiver. For wiring which will give your Caravan a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 118300. I have added a link to an install video of this harness for you to take a look at. It is also recommended you use Dielectric Grease for Electrical Connectors...
view full answer... - Trailer Hitch Receiver and Wiring Harness for 2006 Chrysler Town and CountryYou can tow your trailers, although please note that it is not possible to verify any type of fit for a trailer hitch on anything but fully stock in the area where the hitch will be installed. I can only offer the trailer hitches and trailer wiring harnesses that fit your 2006 Chrysler Town and Country as if it were stock, which are the following: - If your van DOES have Stow-N-Go Seats: Draw-Tite Max-Frame Trailer Hitch Receiver # 75305 - If your van does NOTE have Stow-N-Go Seats: Draw-Tite...
view full answer... - Recommended Trailer Hitch Receiver and Towing Components For 2005 Chrysler Town And CountryFor your 2005 Chrysler Town and Country without stow and go, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13362. This will give you an easy to install hitch with a 2 inch opening for your accessories. Since you will eventually be towing with this van, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118300 that will connect to factory plugs behind your tail lights. For a ball mount, I recommend the B&W Tow &...
view full answer... - Recommended Wiring Harness for 2005 Chrysler Town and CountryThe T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118300 is the right harness to wire trailer lights to your 2005 Chrysler Town and Country. This custom wiring harness adds a 4-way trailer connector to your vehicle. The T-One connector plugs directly into existing wiring so no cutting, splicing or tapping are required. It is recommended to apply a small amount of Dielectric Grease to prevent corrosion. I would recommend using Dielectric Grease for Electrical Connectors...
view full answer... - What Do I Need to Install Draw-Tite T-One Vehicle Wiring Harness on 2005 Chrysler Town and CountryThe item you selected, Draw-Tite T-One Vehicle Wiring Harness, part # 118300, will work for wiring the trailer lights to a 2004 to 2007 Town and Country. If you have a 2005 Chrysler Town and Country, Part # 118300, is the only thing you will need for wiring just trailer lights to your 2004 or 2007 Chrysler Town and Country. If you have an a 1997 model Chrysler Town and Country, you will need part # 118334, as it is compatible with the 1996 to 2000 model Chrysler Town and Country, and...
view full answer... - Everything Works on the Trailer Except for the Running LightsIf the only thing not working is your running lights you are almost there. The running lights are powered through the brown wire on the 4 pole connector. Use a circuit tester and make sure that the prong adjacent to the brown wire, on the 4-way, has power when the running lights are on. If you do not have power there, then your problem is between the taillights and the 4 pole connector, as long as your taillights on the vehicle are working. If the power is reaching the 4 pole connector...
view full answer... - Recommended Wiring Harness and Towing Set Up for a 2007 Dodge CaravanIf you are asking me if there is a Curt wiring harness for your 2007 Dodge Caravan there is one. It is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C55537. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the tail lights. I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118300 you were looking at over the Curt. Tekonsha makes a far superior product and their...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Brent H
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Mike H
Video Edited:
Chris R
Video by:
Andrew K
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ray D.
4/17/2014
Product is still working great and stores away hidden very easy. Works ever time I hook up to the utility or boat trailer without failure. Thanks ETrailer.