Is Bumper Removed On Install Of Draw-Tite Trailer Hitch, # 75305, On 2007 Chrysler Town And Country
Question:
Does the trailer tow package Code 75305 require the bumper to be removed to install on a Chrysler T and C with Stow and Go?
asked by: W. A
Expert Reply:
To install the Draw-Tite Trailer Hitch, # 75305, on your 2007 Chrysler Town and Country with Stow and Go it does not require the bumper to be removed.
You would remove 3 bolts on each side of the vehicles frame. Before installing the hitch it is recommended to clean the corrosion from the weld nuts on the frame, that the bolts were attached to with a Battery Post and Terminal Cleaner, # DW00254. Then spray them with LubriMagic Green Series Biobased Spray Lubricant, # L10442 to help lubricate them. Put the hitch up to the frame and reattach the bolts to hold the hitch in place.
I will send a link to the hitch instructions and a video link that shows the hitch being installed on a 2005 Town and Country.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Cleaning Weld Nuts for Trailer Hitch Installation
- Article: Trailer Hitch Receiver Sizes
- Q&A: Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Search Results: trailer tires wheels
- Search Results: tires
- Search Results: 16.5x6.5 8 tires
- Shop: Suspension Enhancement
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Kenda 4.80/4.00-8 Bias Trailer Tire/ Wheel Combo As Replacement for Existing 4.00-8 Tire
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Search Results: hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch wiring
- Video: Choosing the Right Brake Controller
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
on Trailer Hitch
