To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Plug-N-Tow (R) Wiring Connectors provide a no-hassle, quick and easy way to wire your vehicle.
Can be used with 5-pole, 6-pole or 7-pole adapters.
Connection Points: The wiring harness gets plugged in behind both driver and passenger side taillights. The 4 pole trailer connector will be able to be mounted under the vehicle by the hitch. A mounting bracket is recommended.
Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to install part number 43475 from Hoppy. This is their wiring kit and we are going to install on a 1998 Toyota Sienna mini van. The wiring plugs for this T connector are going to be located behind the plastic here. You can either: a, access them behind the tail light or take off the tail light and get to them that way and run them straight down. Or, in this case, we are going to go behind the plastic and install everything on the inside. First off, we are going to go ahead and take off the thresh hold right here so we can take out the side panels. Alright, undo a couple of screws for the panels. Take off this panel here and there is an additional screw back here you can loosen the panel, the whole rear interior quarter panel with.
Alright, this is the gray connection right here. This is the one we want to take apart and the T part into it. It is real tight working, so you push down the tab here. I think you can pull off the bottom. We are working on the passenger side. We will install the green wire to there and then do the same thing back up in here. And then we can reassemble our panel at this point. We will repeat for the same thing on our drivers side here. We have to take out the jack assembly to pull this whole panel off because this interior part is connected to the plastic here. Again, the same thing applies to the other side. Just push in that little tab and it should pop apart. We will hide our box back behind the plastic and leave this little plastic end, the port for the 4-pole, we will leave that hanging out. We will go ahead an put our panel back together. And we can just reassemble everything inside this panel here.
Next what we are going to do is hide our green wire next to the harness underneath the carpet here and we are just going to pull these little tabs out, just tuck it behind it. Now what we are going to do is bond up our white wire here and our green wire to take up the slack. Now we will install our ground. And we will use the overlapping pieces of steel here. That way, you will have more steel to go through and more for the screw to adhere to. And our little converter box here, we can just tuck back up inside of here. And then, we will leave our 4-pole end port, we will leave that hanging out below the thresh hold. Now at this point here, you can simply just fold this underneath the plastic here and come up inside the jacks storage compartment. And then we can go ahead and plug our 4-pole into the port. And when you are ready to use it, you can simply pull it out, a little bit of it. Go ahead and put the door back on. And you have the excess hanging out and it will come down right down to your hitch. And there you have it for part number 43475 from Hoppy for a 4-pole T end wiring harness.
Average Customer Rating: 4.9 out of 5 stars (30 Customer Reviews)
Does the trick in the Sienna (after the new kid at the local U-Haul shop installed the hardware for a hitch just fine, then drilled RIGHT THROUGH several wires in the bundle in the rear threshold for their adapter! [GRRRR!]) I was able to repair/splice that, and got yours. Makes for a nice clean, plug-n-play installation!
We can take the utility trailer for a load of compost or DG and be street-legal.
Instructions and testing ideas made the whole process do-able, THANX!
Now off to see about other RV/Camper things we'll need later...
I ordered and installed the wiring harness as well as the trailer hitch for my 2003 Toyota Sienna. I am not a mechanic and usually do not do my own work.
I am very pleased to say that the instillation went without a hitch (pun intended). I definitely recommend these products and etrailer.
This product works great! I watched the install video on youtube, then ordered the wiring harness, then I installed it in less than 10 minutes. Thank you for making it simple! I highly recommend this to anyone!
Everything worked perfectly, and installed easily.
Not knowing about auto electrical wiring. I received your unit yesterday. And installed it today with ease I tested all my light functions and to my suprise it worked. Thank you guys very much.
It cannot be any easier to install with no cutting, drilling or splicing.
Went together easily and quickly. Less tha an hour total. Would have been faster had not two of the Toyota bolts had not been crossthreaded.
Only shortage, a mounting bracket as a premanent install.
Written instructions don't help much, WATCH THE VIDEO! Watched it once, then took about 15 minutes to hook up harness and reinstall panels. Hooked up friends trailer with "wiring issues" and everything worked first try!
How could it be better? I order the Wiring Harness on Wednesday, it arrived on Friday, and it works perfectly. Thanks
Works as advertised. Easy to install and fits a Toyota sienna perfectly The installation video is very helpful.
I received it on time and it took me about 30 minutes or less to install. It was very simple and everything worked just right. I reviewed the video that was included on the site and it was extremely helpful. I have only had to use it once so far, but more opportunities will develop.
Item was easy to install Video was helpful. Installed onto my 2000 toyota sienna worked like a charm.
Good YouTube videos on installation. Product was a great fit and installation no problem. The ordering and shipping process was fast and efficient! Great customer service!!!
works great so easy to install
Good product and easy to install.
Russ M.
6/29/2015
Everything is still working great, thanks again.
It was updated daily and told me everything I needed to know and shipped on schedule.
I recieve it today and all i do is just fit right in place no wire cutting at all.....i love it....next car i will definitely but it from you guys.....thankyou so much. Makr my life easier...
Not the easiest to install but I would buy again.
Great people shipped everything on time and even used tracking. Pkg was small and well packed. Prices were great also !!!!!
jUST AS DESCRIBED.
Awesome product and very helpful with video tips.
Great products, service, communication and super fast shipping! Thanks for a great shopping experience!
This was supper easy to hook up. The short video was a great help.
Installed in 15 minutes, works perfectl y.
works great, easy to install, and easy to find and order the right part on the web.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tom K.
6/12/2017
Perfectly, that is an easy install.