SUP and Surfboard Pads for SeaSucker Monkey Bars - 19-1/2" Long - Qty 2

See what our Experts say about this SeaSucker Watersport Carriers

• Is There a Way to Mount a Kayak to the Side of My 4x6 Enclosed Carry-On Trailer?
  If you are looking for an option to mount a kayak to the outside wall of a 4x6 enclosed carry-on trailer, I recommend the SeaSucker Monkey Bars # 298-SX6000B. The Monkey Bars have state-of-the-art vacuum cups that apply a tremendous amount of pressure to the attachment surface of your trailer. I confirmed with SeaSucker that they have tested and approved the application to the side of trailers. As far as attaching the kayak to the Monkey Bars, the kayak will be most secure if attached...
  view full answer...
  
• How Far Can Kayaks Be Carried Using the Foam Blocks for Naked Roof Set-Up at Highway Speeds?
  With your SnugTop camper shell on your 2007 Toyota Tacoma, the ability to use a kayak carrier at highway speeds depends on the carrier used. The Rightline Gear Kayak Carrier with Tie-Downs - Foam Block Style # RL100K10 is not recommended for highway use unless used with a roof rack utilizing the integrated grooves in the foam blocks. The foam by itself can be used to transport kayaks, but it is not recommended for highway speeds. To safely transport your kayaks on your vehicle, I recommend...
  view full answer...
• What SeaSucker System do You Recommend to Use for My Kayak?
  I have a great SeaSucker solution for you to transport your kayak. However, with the SeaSucker Surfboard Carrier - 2 Surfboards or SUPs # 298-BX1806, this carrier is not extendable and they are only designed to work with either surfboards or stand-up paddleboards. With that being said, we do have a SeaSucker system that works for a kayak. For that route, I recommend using the Monkey Bars # 298-SX6000B with the crossbar pads # 298-SA1022 to protect your kayak. The Monkey Bars come with...
  view full answer...
• Recommended Roof Rack and Stand Up Paddleboard Carrier for Jeep Liberty 2010 Flush Side Rails
  Thanks for the photo. Your 2010 Jeep Liberty flush rails are not load bearing so there currently is not a fit for a roof rack on that edge rail but there is a solution. My recommendation for you to carry your paddleboard is the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B along with the SUP and Surfboard Pads for SeaSucker Monkey Bars - 19-1/2" Long - Qty 2 # 298-SA1022 and Tie-Downs # 298-SA0010. This system uses vacuum mounted cups that each have a...
  view full answer...
  
• Height Of SeaSucker Monkey Bars Roof Rack # 298-SX6000B To Bottom of Crossbar
  The SeaSucker Monkey Bars Roof Rack # 298-SX6000B will position the bottom of the crossbar 4-1/2" above the roof at the mounts. As long as your roof curve and hump does not exceed this you will be able to use them to carry your Stand Up Paddleboard. I recommend using a set of Pads # 298-SA1022 and Cam Buckle Tie-Down Straps # 298-SA0010 to secure your SUP and protect it from damaged on the round bars.
  view full answer...
• Roof Rack For Naked Roof On 2017 Porsche Macan
  Most of our neighbors who have higher end vehicles, and do not want a fixed solution to a roof rack choose the SeaSucker Monkey Bars Vacuum Cup Roof Rack Part # 298-SX6000B. It secures quickly and easily with the vacuum cups and provides more than enough suction to carry bikes or surfboards. It provides a weight capacity of 150 pounds! Our neighbors prefer this design because of the installation process and the scratch free security the suction cups offer. It provides plenty of adjustability...
  view full answer...
• Best Way to Carry a Kayak on a 2018 Honda Ridgeline Using Crossbars and Bed Extender
  I recommend the Yakima LongArm, part # Y01149-1150, for the hitch extender. This is a pretty new part offered from Yakima and they were here a few months ago showing it off to us. This thing is solid and it's versatile since it can be set at roof or bed height. I've linked a video from when our installers tested it out for you. Since you don't want a permanent roof rack take a look at the SeaSucker Monkey Bars # 298-SX6000B. The crossbars connect to your Ridgeline's roof using vacuum...
  view full answer...
• Highest Capacity Roof Rack Available For 2003 Acura TL
  The only roof rack available for the 2003 Acura TL that provides 125 lbs of weight capacity is the SeaSucker brand. The other brands offer 25-35 lbs less capacity. I was not able to find the roof capacity of the Acura TL in the owner's manual. It says to contact the dealership for more information on how much weight the roof can handle. It is a good idea to find this information out before carrying kayaks. I recommend SeaSucker Monkey Bars part # 298-SX6000B because this setup gives you...
  view full answer...
• Recommendation For Carrying 2 Kayaks On A 2001 Dodge Ram
  For your 2001 Dodge Ram, I recommend you utilize your rear trailer hitch versus a front hitch and half of a roof rack. It sounds a little strange but if you put one crossbar on the roof and then used the Yakima LongArm Truck Bed Load Extender # Y01149, you could not only carry 2 kayaks but the T-Load will also help with lifting or lowering them. For the roof rack, I recommend using the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B as this is the only rack...
  view full answer...
• Can you Carry a Canoe on the SeaSucker Monkey Bars
  Using the SeaSucker Monkey Bars, part # 298-SX6000B, on your 2020 Honda Odyssey is a great choice for a roof rack. It will work with your canoe so long as it is under 150 pounds (also check your owner's manual to ensure that it can handle that much). If your canoe is under 150 pounds, then it won't pull up enough to overcome the 210 upward pull limit. I do recommend using the SUP and Surfboard Pads for SeaSucker Monkey Bars, part # 298-SA1022. This will keep your canoe from getting any...
  view full answer...
• How To Carry Kayak On Roof Of 2009 Volvo C70
  I do have an option for you but the Darby Extend-A-Truck Kayak Carrier w/ Hitch Mounted Load Extender and Single-Bar Roof Rack part # DTA944-968-924 is going to be too tall to use on your vehicle to transport the kayak level with the roof. The Volvo is about 4-1/2 feet tall and the Darby will be a foot taller then the vehicle once installed in the hitch. Also, the Darby needs to be installed in a 2" hitch and it looks like you have a 1-1/4" Class I hitch on the Volvo. Instead, the only...
  view full answer...
  
• Compatibility of SeaSucker Roof Rack for Surf Board at 70 MPH
  The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B you asked about are definitely rated for speeds of 70 mph in good driving conditions. Each of the 6 vacuum cups is rated for a pull strength of 210 lbs. This rack on your vehicle is rated for up to 150 lbs at those highway speeds, so you will not have any issue as long as your board is secured to the rack well. I recommend using the SUP and Surfboard Pads for SeaSucker Monkey Bars - 19-1/2" Long - Qty 2...
  view full answer...
• Can I Carry a Moken 12.5 Angler Kayak using SeaSucker MonkeyBars on 2018 Chevy Equinox?
  Yes, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B will work on your 2018 Chevy Equinox to carry your FeelFree Moken 12.5 kayak. You may want to add the crossbar pads # 298-SA1022 for some added protection and cushioning for your kayak, as well as the Cam Buckle Straps # 298-SA0010 to tie down the kayak to the bars. If you're at all worried about security and intend on leaving your kayak unattended when attached to your vehicle I recommend a cable lock like the Fulton 15 ft # FCLK150100...
  view full answer...
• Roof Rack for 2019 Toyota RAV4 Hybrid With Naked Roof
  I checked with the roof rack manufacturers and there is just one option for your 2019 Toyota RAV4 Hybrid that has a naked roof, but it is a very good one, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B (all prices can be found on the respective product pages). The SeaSucker roof rack is outstanding because not only is it very easy to take on and off your RAV4 with its vacuum cups, but it has a hefty 150 lb weight capacity to easily carry your kayaks. To install it on your RAV4, just...
  view full answer...
  
• Recommended Roof Rack for 2019 Honda Odyssey
  For your 2019 Honda Odyssey, there are only the raised side rails or no rails. Based on your photo and description, I recommend the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount # 298-SX6000B. Each vaccum cup has a pull strength rating of 210 lbs. I've attached a video to assist with the strength of this system so you can rest assured it won't come loose from your vehicle. Then you can use the SUP and Surfboard Pads for SeaSucker Monkey Bars - 19-1/2" Long - Qty 2 # 298-SA1022...
  view full answer...
  
• SeaSucker Vacuum Cup Mounting Capacity, Function, and Fit
  The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - Folding - 48" Long # 298-SX6000B does simply use the vacuum cups as the sole securing factor. Each vacuum cup is rated for 210 lbs pull strength, so this system is claiming 1,200 lbs of pull strength and they have been tested with cargo at highway speeds without issue. The strength is really incredible...I've attached a video to assist. For increased security and theft deterring, they recommend the window mounted cable anchor...
  view full answer...
• Roof Rack and Kayak Carrier Options for 2011 Toyota Sienna Base Model Without Siderails
  For your 2011 Toyota Sienna without siderails, the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B is a great option. It uses vacuum mounts that each have a 210 lbs pull strength rating. Then you can use the SUP and Surfboard Pads for SeaSucker Monkey Bars - 19-1/2" Long - Qty 2 # 298-SA1022 along with the Cam Buckle Tie-Down Straps for SeaSucker Monkey Bars - 1" Wide x 10' Long - Qty 2 # 298-SA0010. This is a very strong system able to handle highway speeds...
  view full answer...
  
• Roof Rack for a 2010 GMC Yukon Hybrid with a Naked Roof to Carry a Porta-Bote
  If your 2010 GMC Yukon has a naked roof (no side rails that run front to back, crossbars that run side to side, or tracks that run front to back) then we do have a roof rack option for you. You can use the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B. This roof rack utilizes vacuum mounts that are rated for 210 lbs pull strength each so they are very solid for carrying anything within the 165 lb weight rating of any traditional roof rack. It is also very...
  view full answer...
• Thule Trail TH864XT Cargo Basket Mounting Hardware Compatibility with Seasucker Monkey Bars
  The Thule Canyon XT rooftop cargo basket # TH859XT has hardware designed to fit on most types of roof rack crossbars, including round ones like those in your SeaSucker Monkey Bars Roof Rack # 298-SX6000B. It comes with several sizes of u-bolt to allow a solid fit on various bar sizes. These are shown in the linked photo. The SeaSucker bars measure 1-1/4-inches in diameter which should be large enough for a proper fit since the basket hardware is designed to fit Yakima's round roof rack...
  view full answer...
  
• Is the SeaSucker Monkey Bars Roof Rack Safe for Long Distance Trips
  I would just check the pressure for the SeaSucker Monkey Bars Roof Rack # 298-SX6000B any time you make a pit stop. As long as you follow the instructions when installing these on your 2013 Lincoln MKS you won't need to worry about them coming off. It is a good idea to do a quick visual check though at pit stops (or whenever you want to make you comfortable) just to be on the safe side. To secure your kayak to this roof rack I recommend using the Pads for SeaSucker Monkey Bars # 298-SA1022...
  view full answer...

Do you have a question about this Watersport Carrier?