Recommended Roof Rack and Stand Up Paddleboard Carrier for Jeep Liberty 2010 Flush Side Rails

Question

Question:

I want to get a roof rack that would fit my 2010 Jeep Liberty but I do not have raised side rails - I have factory flush rails that run front to back. I just want a roof rack to carry my paddle board. Looking for some clarity! Thank you!

asked by: Paige S

0

Expert Reply:

Thanks for the photo. Your 2010 Jeep Liberty flush rails are not load bearing so there currently is not a fit for a roof rack on that edge rail but there is a solution.

My recommendation for you to carry your paddleboard is the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B along with the SUP and Surfboard Pads for SeaSucker Monkey Bars - 19-1/2" Long - Qty 2 # 298-SA1022 and Tie-Downs # 298-SA0010. This system uses vacuum mounted cups that each have a pull strength rating of 210 lbs to hold the system to your naked roof without any side rails needed.

If you will only ever use it with a paddleboard, then I recommend the SeaSucker Board Carrier - Vacuum Cup Mounted - 2 Surfboards or Paddleboards # 298-BX1806 and the SeaSucker Clip and Grip Paddleboard Carrier - Vacuum Mount - Black # 302-5461.

expert reply by: Jason S

0

click to enlarge

Answer 1

Both the #118781 and the #118753 are indeed confirmed to fit the 2018-2020 Honda Odyssey, both use T-connectors to plug into your tail light connectors, and both are rated at 5 amps for the stop/turn circuit and 7.5 amps for the tail light circuit.…

view full answer...

Answer 2

I can see why this might be confusing and there are some differences between all 3 of these wiring harnesses. I'll start off by explaining the differences between the Tekonsha #118781 and #118753 wiring harnesses. The main difference is that the…

view full answer...

Answer 3

The etrailer Raised Side Rails for Roof Rack - Black Powder Coated Steel #e99034 are a great option for your 2019 Honda Odyssey. Next I recommend adding the Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58"…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Recommended Roof Rack and Stand Up Paddleboard Carrier for Jeep Liberty 2010 Flush Side Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching