Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
(88 reviews)
Price: $303.66
Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
Item # 15902
Retail:$444.95
Our Price: $303.66
You Save: $141.29
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that are ready to ship
- All Info
- Reviews (88)
- Q & A (0)
- Photos
CURT Heavy Duty Receiver Hitch - 15902
- 2 Inch Hitch
- 12000 lbs GTW
- Weld-On
- 18 - 44 Inch Wide
- Class V
- CURT
- 1200 lbs TW
This class V universal weld-on trailer hitch receiver with brackets and 10.865" drop is designed for use on service body trucks and utility body trucks.
Features:
- Universal hitch designed for use on service body trucks and utility body trucks
- Heavy duty, universal side bracket design
- Adjustable side brackets slide along hitch body to match exactly the width of your vehicle frame before being welded to the hitch
- Side brackets fit frames from 18" up to nearly 44"
- Side bracket height produces a drop of 10.865" from the vehicle frame
- Black powder coat finish resists rust and corrosion
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Assembled in the USA
Specs:
- 44" wide trailer hitch receiver
- 2" square receiver opening
- 1/4" thick brackets
- Side brackets must be welded onto hitch and vehicle frame
- Side brackets fit frames from a minimum of 18" to a maximum of 43.88"
- Bracket height produces a drop of 10.865" from the vehicle frame
- Capacity ratings: GTW up to 15,000 lbs and TW up to 1,500 lbs
- Limited lifetime warranty
Warning: All welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty.
15902 Curt Class 5 Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop - 15902
Average Customer Rating: 4.8 out of 5 stars (88 Customer Reviews)
This class V universal weld-on trailer hitch receiver with brackets and 10.865" drop is designed for use on service body trucks and utility body trucks.by: EAVgirl07/14/2023
It’s beefy and solid. The mounting bracket square holes had to be cut in a smidge and he added two more support bars.. but all in all. My welder said it would tow 11-12 k. Not the 16k I was told. But hey. I’m okay with that. There was a shipping issue which forced me to reschedule a few things, that is the only reason I gave 4 stars. Otherwise I am supper happy with how it turned out.
by: Rodney07/09/2018
Very happy with this hitch. The size of the end plates matched the frame on our old truck and with the class V weight rating, our old truck can do a few other things around the farm now. Thank you.
by: Roger 08/31/2023
Great product. Fast delivery
by: Roland G.04/21/2015
I called to ask what was the inside dimension of the big square and it was said to be 4 1/2" square, that wasn't even close, it was 3 5/8" square.
But I was lucky I needed 3 1/4 square. I'm modifying this to fit my fisher plow bracket so I have a front hitch to use around the yard. Nobody makes one. I own a machine shop so by getting this saves me a lot of work. So by receiving the wrong info I rating you less than EXCELLENT
by: Clark D.07/26/2011
What a great hitch for a great price. I attached this to the rear of my Freightliner FLD-120. What a beast! The perfect hitch! Thanks
by: Kellen06/23/2018
Heavy duty hitch. Easily installed. However I am a welder fabricater with 30 years experience.
by: Dan P.11/20/2016
Easy installation and after one year of heavy use, still going strong!
by: Michael 08/27/2020
This is a very heavy duty hitch. Haven't gotten it mounted yet, but looks to be of good quality.
by: Paul 09/02/2021
Paul
10/17/2022
excellent product!!Modified to fit on my military truck to enable hauling of civilian trailer as well as the military lunette coupler depending which is needed.
by: Matt 09/14/2016
Fast shipping and quality product at a reasonable price.
by: James 10/02/2021
Great service, quick delivery. Would re commend
by: David08/19/2023
by: Justin 04/12/2023
by: Francis 02/24/2021
by: David01/24/2024
It is very well built and the powder coating is very tough, took a good grinding to get it off for the welds. Good price as well. I used it for my 2006 Bounder 35E, not because it was a high rate hitch, as I did not need one, but this was the only one that would lower the hitch to a more normal height from the ground. The old hitch was so high a 10" deep was not enough to use a trailer parallel to the ground. Now I can hook up a lot easier and not worry about scraping. Looks good too.
by: James08/19/2023
Great quality product from Curt . Can be easy installation depending on the application.. mine more difficult because of aluminum alloy frame, so will have to do some reinforcing.
by: Jon12/09/2023
I put this on my 03 Freightliner Columbia. It does everything I want it to. It is bolted and welded.
I like it so much that a bought another one and put it on my old school bus. That one is just bolted on.
by: Paul10/10/2022
attached this hitch to my 1984 American General 5 ton military truck. Had to do some modification to air lines and drill a few holes but it is perfect for pulling civilian trailers with the M 813.
by: Derrick 09/13/2023
Added (welded) to our diesel pusher Motorhome and have no issues and really no worries while towing whatever we feel we need while camping.
by: Gilles 04/19/2024
Fast shipping
by: Brandyn02/15/2024
I think you guys should send me some ap parel!
by: Kem03/20/2023
Well, I really respect the fact that they waited for one year before asking for a review, they offer a 2 inch and a 2 1/2 inch receiver the 2 1/2 inch receiver would obviously be a larger rectangle to accommodate a half an inch, the vertical uprights I received had holes pre-cut to accommodate a 2 1/2 inch receiver I ordered a 2 inch receiver, needless to say, there was an abundance of slop, half inch gaps, requiring a lot of fabrication on either side of the vertical uprights, knowing this now, going with the 2 1/2 receiver should have saved a ton of unnecessary fabrication time.
by: Charlie11/28/2023
Exactly what we wanted. Worked perfect on our recent, extended trip to Alaska and back.
by: Ryan 02/15/2024
Solid as stone!!
25
89
Show More Reviews
See what our Experts say about this CURT Heavy Duty Receiver Hitch
- Trailer Hitch Options for 1973 Penn Versatile Step VanWe have a couple of options that will provide you with a trailer hitch for your 1973 Penn Versatile Van, but they will need to be welded or bolted to the frame as there are not any custom fit hitches for your vehicle. For a hitch with a bit of a drop, you could use the Draw-Tite Class IV Weld-On 44 Inch Wide Ultra Frame Trailer Hitch with 7 Inch Bracket # 41990-07. This hitch is also available with 16 inch brackets, part # 41990-16. The Ultra Frame hitch is designed for service-body and...
view full answer... - Trailer Hitch receiver For A 2011 Ford Expedition EL Hey Brian, That is correct, manufacturers do not offer a bolt-on trailer hitch receiver for 2011 Ford Expedition models. You'll have to go with a weld-on hitch and would need to measure the distance between your frame down to clear the bumper so that you can choose the correct drop: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
view full answer... - Trailer Hitch Receiver Options For A 2005 Ford E-350 School Bus Hi Jacob, The Curt Trailer Hitch Receiver # 14053 lists that it's a fit for cutaway chassis if the bolt holes are 38-5/8 inches from frame to frame. This would mean that the holes in your frame have to be spaced 38-5/8" from center to center in order for the hitch to work. With your vehicle be a school bus and the dimensions that you stated you'll likely have to go with a weld-on adjustable fit trailer hitch receiver. You'll want to measure the distance down from the frame to clear...
view full answer... - Class IV or Class V Hitch Availability for 2008 Dodge Ram 2500 with Roll Pan BumperThe Class IV and Class V hitches we offer for your 2008 Ram 2500 pickup, viewable on the link provided for you, are designed for use on trucks that have a factory-installed standard bumper or in conjunction with a factory welded on hitch. We have no custom-fit aftermarket Class IV or Class V hitches for your truck that will work with your roll pan bumper. You may be able to install a universal-fit hitch such as the Curt Class V Universal Weld-on Receiver Hitch # 15903 or # 15902 but you'll...
view full answer... - Trailer Hitch Receiver Compatible With Osage Ambulance Box On 2007 Ford E-450 Van ChassisWith your 2007 Ford E-450 van chassis and Osage ambulance box you are going to need a weld on receiver like the Curt Class V Universal Weld-on Receiver # 15902. This particular receiver includes brackets which will allow for a drop of 10.865" from the vehicle frame. We also have the Receiver # 15901 which will give you up to 3" of drop if you do not need any more than that.
view full answer... - Is there a Class IV or V Hitch Available for a 1989 International S1600We have 2 hitches that might work depending on the specific measurements of your 1989 International. Curt hitches 15901 and 15902 are both weld-on hitches that will fit frames from 18 inches wide to 44 inches wide. The 15901 has a 5 inch drop. The 15902 has a 13-1/2 inch drop. I am not certain if the hitch itself, being 44 inches wide, will interfere with anything else under the vehicle (seeing as it is 10 inches wider than your frame rails). So you will need to check and see if clearance...
view full answer... - Correct Hitch for 2019 Freightliner Sprinter 3500The correct hitch for your 2019 Freightliner Sprinter 3500 depends on the wheelbase and bumper. To keep it simple I have two options for you where the only difference is the bumper style. -Draw-Tite Max-Frame Trailer Hitch Receiver # 75549 (144" or 170" wheelbase with standard bumper) -Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 (144" or 170" wheelbase with factory step bumper) You will also need to know the outside to outside frame measurement. If it is 30-3/8" then there are...
view full answer... - Hitch For 2015 Freightliner 3500 With 30-3/8 Inch FrameThe only possible option for your 2015 Freightliner 3500 with a 30-3/8 inch frame is a weld-on universal hitch, the Curt Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop # 15902. This has a crosstube that measures 44 inches so you need to make sure you have the space under the frame for it to fit without interference. I cannot recommend just using spacers for the Curt hitch, and I would not be able to tell you why the 3500 has different dimensions.
view full answer... - Universal Front Mount Hitch For A 1999 Jeep Grand Cherokee Laredo I may have an option for you but the Curt Front Mount Trailer Hitch Receiver # 31084 will not fit on your 1999 Jeep Grand Cherokee Laredo. It will not fit your 1999 Grand Cherokee due to the difference in the frame and the bumpers. With there being no custom fit front mount hitches for your Cherokee, the only option that we have is a universal hitch receiver like the Curt Class V Universal Weld on Receiver Hitch # 15902. You will have to fabricate this front mount hitch onto your Jeep....
view full answer... - Trailer Hitch That Exits Through License Plate Area with a Roll PanI do have a trailer hitch receiver option for your 1970 Chevrolet C10 Pickup but none of our customer fit trailer hitch receivers we have for you will exit out of the rear licence plate area on your truck with a roll pan attached. I am also not aware of a customer fit option with the above criteria that is made for your truck. The only way to have the receiver tube opening stick out the rear license plate area through the roll pan on your truck would be to cut/weld the Curt Class V Universal...
view full answer... - Class V Trailer Hitch for 2015 Forest River SR340 Diesel Pusher Motor HomeWe do not offer a custom-fit Class V hitch for your 2015 Forest River SR340 diesel pusher motor home but we do have universal-fit hitches that can work for you. Installation will just be a bit more involved than for a bolt-on hitch. For example, Curt offers their weld-on 2-inch Class V hitch # 15903 rated for up to 1500-lbs tongue weight and 15,000-lbs gross trailer weight. We also offer Curt hitch # 15902 for frames between 18-and 44-inches wide that offers about 10-inches of drop. Curt...
view full answer... - 2010 Ford E450 Based Motorhome Yellowstone GulfStream Class V HitchI've spoken to Curt on your behalf and there is no bolt on hitch for your 2010 E450, but you can use the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. You will need to weld it on to your frame. This hitch has a maximum gross trailer weight of 15,000 lbs and a maximum tongue weight of 1,500 lbs. It has a 3 inch drop which you may want more. Here is the same hitch but it has almost a 11 inch drop # 15902. To make sure that your racecar trailer will not exceed...
view full answer... - Universal Or Custom Fit Front Mount Trailer Hitch Receiver For 1996 Ford BroncoI may have another option but the Curt Front Mount Trailer Hitch Receiver # 31026 is only a confirmed fit 1992-1996 Ford F-150 and will not fit on your 1996 Bronco due to the differences in the frame and bumpers. Since there is no custom fit front mount trailer hitch receiver for your Bronco, the only option would be to have a universal trailer hitch receiver like the Curt Class V Universal Weld-on Receiver Hitch and Brackets # 15902 fabricated to fit the front of your Bronco. I included...
view full answer... - Recommendation for a Weld-On Trailer Hitch for a Freightliner Step VanYour best option is either going to be going with a Curt hitch, # 15902, or going with one of the hitches with 16 inch brackets like # 41990-16. This hitch is closest to what you need. You will need to have a qualified professional welder perform the installation. I have included a link to the installation details for the Curt hitch for you.
view full answer... - Trailer Hitch Options For A 2019 Isuzu NPR With Rollback Flatbed Hi James, There isn't a custom-fit trailer hitch option available for your 2019 Isuzu NPR so you'll need to measure the distance between the inside of the frame rails and also the drop needed from the frame down to clear the rear bumper. We offer a variety of drops to accomplish this that I've listed out below: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR These would all need to be welded...
view full answer... - Availability of a Trailer Hitch for a 1956 Chevrolet 210 Townsman Station WagonNone of our hitch suppliers offers a bolt-on custom-fit trailer hitch receiver of any size for your (awesome!) 1956 Chevy 210 Townsman Station Wagon. Your one option is a universal-fit RV-type hitch, such as the Curt # 13703. Please keep in mind that you will be on your own in terms of determining proper fit. Also, since this will be an untested application your actual tongue weight and towing capacities will be unknown. The vehicle itself may have different capacities than the hitch....
view full answer... - Higher Capacity Hitch that Fits 2007 Winnebago Sightseer 29RWe have a universal style weld-on hitch that fits your 2007 Winnebago Sightseer 29R with the Curt Class V hitch part # 15902 but the hitch you mentioned does not fit.
view full answer... - Front Mounted Trailer Hitch Options For A 2004 Lexus GX 470Hey Eric, There aren't any custom-fit front mounted trailer hitches available for a 2004 Lexus GX 470 so you would need to go with an adjustable-fit weld-on trailer hitch. To do this you'll need to measure down from the frame to the location where you'd like the receiver tube to sit to figure out your drop. I've listed out the drops we currently offer below: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18"...
view full answer... - Trailer Hitch Recommendation for a 2003 Coachmen Mirada on a Ford ChassisWe may have a trailer hitch that will work with your 2003 Coachmen Mirada, however the Curt Custom Fit Class V Trailer Hitch, # C14048, that you referenced will not fit Class A motor homes. Before installing a Class V trailer hitch on your Mirada, I recommend checking your owners manual or with an RV dealer to determine the towing capacity of your motor home. Most motor homes do not have high towing capacities, so a Class V hitch may be overkill. Our Class V trailer hitches are universal...
view full answer... - Hitch With 800-1000 Pound Tongue Capacity for 1997 Ford E350 Class C MotorhomeAs custom bolt on hitches are not made for Class-C motor homes you will need an adjustable one. A typical Class-3 hitch will have a top tongue weight capacity of around 600 pounds. A higher class hitch will have much more capacity. Since you prefer to have 800-1000 pounds of capacity I would use the Curt # 15902 Universal Hitch with brackets and an almost 11" drop. If that drop amount is too much, let me know and I will recommend a hitch with less of a drop. In any case, you will need...
view full answer... - Hitch for Winnebago Sightseer WFD33LI have a couple of possible solutions for you. Since there is not a bolt on hitch specifically for your Winnebago you will need to use an adjustable weld-on, or Drill & Bolt hitch that connects to your frame. On solution would be the Curt # C13701 Adjustable Trailer Hitch for RV frames measuring 18" to 51" in width. This Class-3 hitch has a 2" receiver, featuring a 5000 pound towing capacity. Assuming your Winnebago as sufficient towing capacity, this hitch's capacity would be just enough...
view full answer... - Trailer Hitch Recommendation for a 1997 Damon Intruder with 10,000 lb Towing CapacityWe may have something that will work for you, but keep in mind, trailer hitch manufacturers do not make custom fit hitches for RVs and motor homes. A universal hitch is used and is typically bolted or welded to the frame of the RV and in some cases the mounting brackets have to be modified. You will also have to remove the existing hitch, but I recommend holding on to the mounting brackets as templates just in case the mounting brackets for the new hitch have to be modified. I also recommend...
view full answer... - Front Mount Trailer Hitch For A 2021 RAM 5500 DieselThough the front mount hitch # EH37FR is not confirmed to fit your 2021 Ram 5500 The Curt Class V Universal Weld-on Receiver Hitch # 15902 can be fabricated to fit the front of your 2021 Ram 5500. The hitch has a black powder coat finish that will resist rust and corrosion. The side brackets will fit from 18 inches to nearly 44 inches. It has a solid construction for maximum strength and safety. I attached a review video link below.
view full answer... - Thickness of Side Plates on Curt Hitch 15902The Curt hitch part # 15902 that you referenced that you referenced has side plates that are 1/4 inch thick. The hitch has weight capacities of 15,000 lb total trailer weight and 1,500 lb tongue weight.
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
7/17/2023
The hitch looks good! The hitch itself is rated to tow up to 15,000 pounds however it is limited to the frame and or bumper capacity that the hitch is welded. So if the RV is only rated to tow 11,000 pounds then that is what you would want to go by.