T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(176 reviews)
Price: $91.54
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118712
Retail:$152.24
Our Price: $91.54
You Save: 40%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (176)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118712
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Connect hot lead to car battery
- Includes ModuLite power module that connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery. Connect the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118712 Tekonsha T-1 T-Connector - 4 Wire - Modu-Lite Converter Included
Installation Details
This Product Fits The Following Vehicles
- 2017 - 2020 Chrysler Pacifica excluding Hybrid
- 2017 - 2020 Chrysler Pacifica Limited
- 2017 - 2020 Chrysler Pacifica Touring L
- 2017 - 2020 Chrysler Pacifica Touring L Plus
- 2017 - 2020 Chrysler Pacifica Touring Plus
- 2020 - 2020 Chrysler Voyager
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Did not arrive in time
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118712
Average Customer Rating: 4.6 out of 5 stars (176 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Wayne 03/23/2024
2018 Chrysler Pacifica
Excellent, Easy installation. for the pacifica its difficult to get the passenger wiring harness up thru the body. Theree isnt enough clearance fpr the plugs to fit thru. We ended up cutting the green wire about 2 in past the 2-in-1 junction. Then, fishing the long green wire thru the body and re-splicing it with a weatherproof connector. Much easier than fishingh the two connectors
by: Shaun P06/13/2023
2018 Chrysler Pacifica
Installed without problem. Took about 2 hours by myself. But I also took more time trimming the under panel for a better fit than what the instructions called for. Now just have to wait for the wiring harness to come since it came from a different warehouse and I’ll be all set.
by: Dan02/19/2024
2019 Chrysler Pacifica
Won't be installing the electrical until this spring. Not needed for trailering right now.
by: Jonathan 08/07/2023
2017 Chrysler Pacifica
Confirmed, fits a 2017 Chrysler Pacifica Hybrid. This product is not verified for the Pacifica hybrids but saw a forum post explain how that should not be an issue (just need to buy the correct connector for the light bulb type). My guess why this isn't confirmed by E trailer, theres a lot more components you need to fish through (i.e. batteries, inverter cables, etc.,.) That etrailer doesn't want to be liable. Just like the vid says, avoid hot items like the exhaust or moving parts like axles and you'll be fine.
by: Robert05/10/2020
2020 Chrysler Pacifica
Age 75. Alone, I installed the Draw-Tite Max hitch and Tekonsha T 1 vehicle wiring kit myself. I lifted the Pacifica rear 4" for better access. I also lifted the driver side 4" to install the power wire to the T 1 module. I used a 3' piece of 3/8 and 1/4 inch plastic tubing for 'fishing' the T 1 wires, power and tail lights. The left tail light requires some twisting and turning of the tubing to get the square module to pass upward through the body. I cut the heat shield and aero panel much less than suggested.
by: Matt C. from Peoria il09/09/2018
2018 Chrysler Pacifica
This fit my 2018 Pacifica Touring Plus! I compared a picture of the plug someone posted on this site to my taillight and they were the same. I took my time on the install and it took me about 1.5 hours. The 18' Pacifica has a bunch of under body shields that makes this install take longer. I have installed at least five of these harnesses on my vehicles and this one was very straightforward. I also purchased the Curt Class III hitch from etrailer and installed it a couple weeks ago. Attached is a picture of the taillight connector on my 18' Touring Plus. The difference in plugs between models is the position of the two tabs.
by: Timothy07/08/2019
2018 Chrysler Pacifica Touring L.
The hitch and harness fit properly and was not to difficult with 3 guys working on the project. Had to remove the felt trunk protector, exhaust heat deflector and release the exhaust from the last 2 hangers to install the hitch. Replaced all after hitch was installed. Had to do some trimming of both exhaust heat protector and felt trunk protector. Took around 3 hrs for the install when using air / power tools. Nice fit and finish when done. Reasonable price and fast ship.
by: Jonathan02/10/2019
2018 Chrysler Pacifica
Very nice product and connections are easy. Running the wires up to the lights and to the battery is a pain though. Be prepared to get frustrated. Also the driver side connector is pretty short so mount the box up as high into the bumper as you can get it.
by: Jim 02/13/2024
Very fast professional service
by: George04/08/2023
2018 Chrysler Pacifica
install straightforward except drivers side connector was larger than passenger side and almost impossible to fish through. also the wires from that side were 12-18" short and had to put control module in an awkward spot, not at all like video. once installed all works fine. video was helpful in figuring out how to run power wire up to battery
by: Seth05/26/2023
Fit like a glove, like it was designed for the vehicle (which it was). No problems with installation, but I'd say my skills are stronger than most.
by: Fred 01/30/2023
2020 Chrysler Pacifica
Wiring harness worked well. #118712 is the correct harness for a 2020 Pacifica, not the one recommended when ordering the Curt hitch.
The only problem was running the hot wire to the front of the vehicle as the entire undercarriage is covered with panels which need to be removed. A lift or ramps would help.
by: Kevin 04/18/2023
2020 Chrysler Pacifica
Great product, took a little time to install. Installation video was helpful. Fast shipping
by: Elieser01/09/2021
Pretty easy installation just take you time running the cables properly
by: Benjamin10/05/2022
Great web site and easy to order. Very fast shipping. Highly recommend.
by: Frederick04/20/2018
2017 Chrysler Pacifica
Trailer hitch and wiring harness came quickly and in good order. However, the wiring harness connectors would not fit through the body panel because of internal supports and tail light wires, so I had to cut it and splice it under the car. Harness needs to be redesigned to fit through the small channel under the tail lights. Connectors were far too big to be pulled through.
Frederick
4/22/2019
Trailer hitch and wiring harness both working fine. Only problem was installing wire because connectors wouldn’t fit inside corner post. I had to cut wires, install them top down and then splice wires under car with heat shrink insulation. But that worked and I am happy with it. Thanks
by: Don 12/06/2020
The hitch fit perfectly and the install videos on [online] were very helpful. I did have a problem with wiring harness. The interface plugs with the tail lights was good but the driver side harness has a large junction connector that I couldn’t snake through the body panel. I had to cut the two wires and then solder them back together. Other than great products
Don
12/7/2021
Working well. The wiring harness couldn’t be fished through the body due to the large connection sockets. Required cutting and Resplicing the wires.
by: Nathan07/25/2018
2017 Chrysler Pacifica
This is the 4th hitch wiring harness I have installed in 3 vehicles (the others were a '99 Audi A4 and an '08 Mazda 3), and it was by far the hardest. The instructions were sufficient, but fishing the wires through the body by the taillight was extraordinarily difficult. This was made worse when I had to do it a second time after discovering that there wasn't enough wire available to allow the tail-light to be mounted again.
All that is moot though, because the harness DIDN'T WORK. I have a 2017 Pacifica Hybrid, so I'm not sure if it's somehow different than the non-hybrid models, but none of the lights worked after install. I tried to troubleshoot with a fluke and confirmed that no signals were getting through the module to the 4-pin connector. Then as a last-ditch effort I tried to directly connect wires to the 4-pin connector without the power wire, thus destroying the harness by cutting wires; this was predictably unsuccessful.
In full disclosure, I also tried checking the signals on the taillight wires when using the brake and turn signals, and got completely unexpected results (e.g. brake wire with brakes on = 0V, vs 12V with brakes off). Clearly I don't understand how modern signal lights are wired, but then that's why I bought a kit.
Surprised that I seem to be the outlier here. Seems I either got a defective product, or there is something unique about the hybrid that makes it invalid...
Mike L.
7/26/2018
The best method of troubleshooting is to check the input wires from the connection to the vehicle to the converter box, then the output wires from the converter to the trailer connector. If the signals are reaching the converter, but not leaving it, the converter is faulty. If no signals are reaching the converter, check the connections where the harness plugs inline with the vehicle wiring, making sure they are fully plugged in. Make sure the fuse is installed in the yellow fuse holder where the power wire attaches to the battery. For more troubleshooting info, use the provided link.
Helpful Links
by: John 09/13/2023
2020 Chrysler Pacifica
Works perfectly!
by: Jeffrey K04/25/2019
After professional installation (mostly for the electrical hookup) I have to say that I am very pleased with the quality and the sturdiness of this product. I have used it occasionally on my minivan For some medium weight trailering and I have had no problems. I highly recommend this product.
Jeffrey K.
4/26/2020
No issues with multiple uses. The harness was professionally installed by a reputable shop.
by: Chuck’ Hitches01/05/2023
In all the years I’ve ordered hitches from you, this is the first time my hitch came wrapped in plastic and not in a box. Hitch looks “used” due to all the scratches from shipping…. Hope this isn’t your new way of packaging
by: Ronald03/12/2021
Seems to work well. install was a pain, mostly due to under body covers and the reduced tail light space to feed wires in and to store the extra wires / connecters on the Pacifica. But this is still the best alternative. As I recall, I was able to get the left side connectors fished into taillight area . But right side was extremely difficult to get the wires pulled thru. So i cut the wires about a foot from the power module and fished the cut ends down thru the tail light assembly area , then spliced wires. I would recommend a smaller connector on tail light ends and a matching connector on the power wires to the tail light adapters. then it would be easier to pull in the wires from the underside and the added connector would be up in a drier protected area. I was able to fish the main power wire to the front of van without removing additional underbody shields. I protected much of my new wiring with corrugated split wiring conduit. Very limited mounting options for the power / converter module partly due to minimal wire lengths and partly due to the vehicle type . One year later; you probably should send this out earlier while install issues are fresh in mind.
by: Jeff03/30/2019
2017 Chrysler Pacifica
It would have been a lot easier to install wiring harness using a lift. It took a lot longer than anticipated, but the end result was good.
Jeff
3/31/2020
Works as advertised.
by: Adam B06/16/2020
Overall no complaints. Connectors are of good quality and plenty of wire is provided. I installed this kit on a 2018 Chrysler Pacifica Limited. Routing the T plugs up to the taillights was an extreme pain due to the lack of free space below the taillights behind the bumper cover. The rest of the installation was a breeze. Note I installed this wiring kit at the same time I installed a hitch so the rear belly pan was removed. I highly recommend taking that down (just a few screws) to give better access.
by: Stephanie 08/05/2022
Chrysler Pacifica
This is the second hitch kit that I have purchased from etrailer. The fit is amazing, product is high quality my first one was for my Saturn Outlook and it still looks great after years of use. My second is for my Pacifica. The wiring kits are simple and great fit.
I highly recommend this company you will not regret your purchase!
25
176
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Which Model Of 2017 Chrysler Pacifica Will The Tekonsha 118723 Fit?There are a few options for the different trim levels on a 2017 Chrysler Pacifica and these will have different connectors, so you will need to verify which you have first. I have these listed below. LX and Touring: Tekonsha T-One Vehicle Wiring Harness # 118723 Limited, Touring L, Touring Plus, and Touring L Plus: Tekonsha T-One Vehicle Wiring Harness # 118712 Hybrid Models: Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT If you have an LX or Touring model, you should...
view full answer... - What is Towing Capacity for 2017 Chrysler PacificaFor your 2017 Chrysler Pacifica we have the etrailer Class 3 Trailer Hitch part # e98903 which has a pretty high towing capacity of 400 lbs of tongue weight and 5, 00 lbs total trailer weight which goes to 500/5000 when used with weight distribution. One thing you have to consider is that a towing capacity for a vehicle is basically the lowest rated component in the setup. So, this hitch has a high capacity, but your vehicle may be rated much lower and that would be how much you could...
view full answer... - 2019 Chrysler Pacifica Limited S Trailer Hitch and Wiring RecommandationWe have exactly what you'll need. Let's start with the hitch. The etrailer Trailer Hitch Receiver part # e98903 is a great choice. It has the highest capacity of all of the others and already has a bracket for attaching your 7/4 way connector. Now on to wiring you need to start with the 4-way as you said and I like the Tekonsha T-One Vehicle Wiring Harness part # 118712. This will give you the ability to then add on Part # ETBC7 this is the brake controller installation kit. This has both...
view full answer... - Installing 7-Way Wire Harness on 2018 Chrysler Pacifica L Plus No Brake ControllerOh my. Yeah please don't go with what they are offering you. Wiring can be intimidating but it isn't $1,000 intimidating. Unfortunately this kind of pricing seems to be a common thing when it comes to dealership installs, but no need to worry because we have everything you need for wiring and I'm confident that you can get it done as it's more tedious than difficult. For your 2018 Chrysler Pacifica I recommend using the T-One # 118712. This tees in behind your tail lights and then you...
view full answer... - Recommended Hitch and Wiring for Each Style of 2020 Chrysler PacificaFor the hitch on your 2020 Chrysler Pacifica, I recommend the etrailer Class III, part # e98903. It has a gross tongue weight capacity of 400 pounds and maximum towing capacity of 4000 pounds. Those numbers jump to 500 and 5000, respectively, when combined with a weight distribution system. It works with Hybrid and Non-Hybrid models. I've linked to a video installation of this hitch for you to look at. If by lighting you mean wiring to provide lights to your trailer, there are quite a...
view full answer... - Trailer Hitch and Wiring Recommendations for a 2017 Chrysler PacificaI will be happy to help you out. For your 2017 Chrysler Pacifica I recommend the etrailer trailer hitch # e98903. This hitch will fit all models of the Pacifica, including both the hybrid and non-hybrid models. This is a Class III hitch with a 2 inch receiver. Since you mentioned that you will be doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
view full answer... - Recommended Trailer Hitch and Towing Accessories for 2018 Chrysler PacificaFor your 2018 Chrysler Pacifica I recommend the Curt # C13383 Class III trailer hitch which is a 2 inch receiver compatible with hybrid or non-hybrid models. It includes all necessary installation hardware and is made in the USA. There will be some trimming of the underbody panel and heat shield are required but no trimming of the fascia. See attached installation instructions and video for more information. This hitch will work great for a bike rack or other accessory. If you plan...
view full answer... - Recommended Trailer Wiring Harness For A 2017 Chrysler PacificaWhen it comes to installing trailer wiring on your 2017 Chrysler Pacifica The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118712 is confirmed to fit your vehicle. The trailer harness has a simple plug and play installation that plugs into your vehicle's wiring harness, which is located behind the driver and passenger side tail lights. The harness will come out as a 4 pin flat connector. To make the 4 flat connector to a 7 pin round connector The Universal Installation...
view full answer...
- Trailer Wiring Harness to Fit a 2017 Chrysler PacificaThere's actually a third custom wiring harness that fits the 2017 Chrysler Pacifica. As to which you need depends on which trim package you have: Draw-Tite part # 118712 fits the Limited, Touring L, and Touring L Plus models. Draw-Tite part # 118723 fits the LX and Touring models. Curt part # C56322 fits the Limited, LX, Touring, Touring L, and Touring L Plus models. There are also several Class III trailer hitch receivers: etrailer part # e98903 fits both hybrid and non-hybrid models. Curt...
view full answer... - Is Replacement Hardware Available For The Draw-Tite Hitch 76046?We do indeed! What you will need is our part number # RHK. All you will need to do is enter the hitch part number (76046 in your case) in the box above the "Add To Cart" button. This will then include all the bolts, washer, nuts, bolt leaders/fish wire, and spacer plates that would have come with the hitch originally.
view full answer... - Trailer Hitch and Wiring Recommendation for 2020 Chrysler PacificaThe trailer hitch I recommend for your 2020 Chrysler Pacifica is the 2 inch etrailer part # e98903 as it has great towing capacities and is mostly hidden since only the hitch opening hangs below the rear bumper. This aspect also helps with ground clearance as well. I attached a picture of what the hitch looks like as well as an install video for more info as well. For trailer wiring the best option is the Tekonsha kit part # 118712 if you have the Touring L, Touring L Plus, Limited, or...
view full answer...
- Parts Needed to Install 7-Way on 2018 Chrysler PacificaI have a way to help you install a 7-way on your 2018 Chrysler Pacifica but it will have to first start with a 4-way # 118712 and then convert to a 7-way after. Lighter duty vehicles like yours don't have 7-way trailer wiring present which is why this has to be the way to install the wiring. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of...
view full answer... - Brake Controller Installation Parts Required for a 2020 Chrysler Voyager Without Factory 7-WayTo install the Curt Venturer Trailer Brake Controller # C74VV on your 2020 Chrysler Voyager you will need a Tekonsha T-One Vehicle Wiring Harness # 118712 to give you the light controls that you will need and an etrailer Universal Installation Kit for Trailer Brake Controller # ETBC7. I have included a video below of a brake controller installation on a 2018 Chrysler Pacifica so that you can see all the steps required for installation. I would recommend that you upgrade your brake controller...
view full answer... - Will The etrailer Trailer Hitch Receiver # e98903 Fit 2019 Chrysler Pacifica Touring Plus?Yes the etrailer Trailer Hitch Receiver # e98903 is a confirmed fit for your 2019 Chrysler Pacifica Touring Plus. I recommend installing the T-One Vehicle Wiring Harness # 118712 when you install the receiver. The Mounting Bracket # 18144 will allow you to connect the 4-way to the mounting tab on the receiver.
view full answer... - Recommended Trailer Wiring Harness for 2019 Chrysler Pacifica For your 2019 Chrysler Pacifica I highly recommend the Tekonsha T-One Trailer Wiring Harness # 118712 if you have the Limited, Touring L, Touring L Plus, or Touring Plus model or the Tekonsha T-One # 118723 if you have the LX or Touring model. Both harnesses are custom-designed for your Pacifica and will plug into existing ports behind the tail lights. After running the power wire up to the battery you will have a fully-functional 4-Way to connect with and power a trailer's basic signal...
view full answer... - Trailer Hitch and Wiring for a 2017 Chrysler Pacifica LimitedIn addition to the trailer hitch # C13383 for your 2017 Chrysler Pacifica there are a few other items I recommend to set the vehicle up for towing. I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
view full answer... - Can etrailer e98903 Class III Hitch Be Installed on 2020 Chrysler Pacifica Without Using a LiftYou can check out the video that I've linked for you that will walk you through the install. As you'll see, the install involves removing and trimming an under body panel and heat shield as well as temporarily lowering the exhaust which would be very hard to do unless at least the rear of the vehicle was raised in some manner. I'd recommend using ramps or putting the rear of the vehicle up on jack stands so you can have more room to work with. If you'll be towing with the hitch, you'll...
view full answer... - Ball Mount Recommendation for a 2017 Chrysler Pacifica with Draw-Tite Trailer Hitch 36798Your assumption is correct. If the distance from the ground to the top of the receiver opening on trailer hitch # 36798 is 12 inches, and the distance from the ground to the bottom of a level trailer coupler is 17 inches, you would need a ball mount with a 5 inch rise. Ball mount # 36065 is a good option. It takes a ball with a 3/4 inch diameter shank. For a compatible 1-7/8 inch ball you can use # 19256. For a 2 inch ball use # 19258. For trailer wiring if your 2017 Chrysler Pacifica...
view full answer... - Towing Capacity Of 2019 Chrysler Pacifica with etrailer.com Trailer Hitch Receiver 98903The etrailer.com Trailer Hitch Receiver part # e98903 for the 2017 - 2019 Chrysler Pacifica is rated for 4,000 lbs of trailer weight. However, you are only as strong as your weakest component which in your case is the vehicle. If your Pacifica came with a trailer tow package, you can tow 3,600 lbs with a trailer tongue weight of 360 lbs. If the vehicle did not come with a tow package it can tow 1,500 lbs with a trailer tongue weight of 149 lbs. You want to make sure the loaded weight of...
view full answer...
- Best Hitch, Wiring, Bike Rack, & Cargo Carrier w/Lights Recommendation for a 2017 Chrysler PacificaGreat news! I can help you with all those things for your 2017 Chrysler Pacifica. First let's start with a hitch for your vehicle. I recommend the 2-inch Class III etrailer # e98903 hitch. This 2-inch receiver hitch will be more compatible with accessories on the market. It is also compatible with the Limited, LX, and Touring models. For the wiring for the cargo carriers lights like the Pro Series # 63153 with LED light kit # 98174LED, you will need a 4-way connector on your vehicle. For...
view full answer... - Brake Controller and Install Recommendation for 2017 Chrysler PacificaNot all vehicles come with brake controller wiring under the dash. That said your 2017 Chrysler Pacifica SHOULD have a 7-way trailer wiring harness at the rear of it and should have brake controller wiring under the dash. If there is the rear 7-way all you need is the # TK93VR and the Brake Controller IQ part # TK90160. If you have no wiring you'll need to go the hardwire option you also mentioned. The 4-way part # 118712, the adapter and install kit # ETBC7, and then finally the brake...
view full answer... - Installing an Electric Trailer Brake Controller in a 2018 Chrysler PacificaSince you already have a 7-way trailer connector and a brake controller all you should need is the adapter to connect the controller. That's assuming the 7-way is factory installed. If you've installed it yourself, or had it installed aftermarket let me know. If it's a factory 7-way there's going to be a connector under the dash above the steering column not far from where it goes through the firewall. The connector you're looking for probably has a green cover over it. Once you find...
view full answer... - How To Install a 7-Way Trailer Connector On a 2018 Chrysler PacificaThe towing capacity of a 2018 Chrysler Pacifica is 1,500 lbs if you don't have the factory tow package or 3,600 lbs if you do have the factory tow package. The use of electric trailer brakes is pretty common nowadays and I recommend looking for a trailer that has them as it's going to equate to a safer overall towing experience but this is not required. I have attached parts you will need for both options below. etrailer Trailer Hitch Receiver part # e98903 T-One Vehicle Wiring Harness...
view full answer... - What Do I Need To Install A Brake Controller On A 2020 Chrysler PacificaWe have brake controllers that will work with your 2020 Chrysler Pacifica. If you have do not have a factory tow package you will need to add a few parts to your vehicle. You will need the following items: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # 118712 Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires. part # ETBC7 Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional, part # RED44FR You...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Cole B
Test Fit:
Randy B
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Carrie F
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike L.
4/20/2018
Typically we dont recommend cutting into a wiring harness. The cavity below the taillight IS indeed a tight fit, but if the connectors are fed through one at a time, you should be able to get them through. To make things easier, a straightened wire coat hanger can be taped to the connector, and used to guide the connector through to the underside of the vehicle. This process is shown in the linked installation video.
Helpful Links
tv-install-trailer-wiring-2017-chrysler-pacifica-118712.aspx