Ball Mount Recommendation for a 2017 Chrysler Pacifica with Draw-Tite Trailer Hitch 36798

Question

Question:

What ball mount is recommended for this 2017 Pacifica hitch? If the height of the hitch is 12 inches and the standard height of a trailer is 17, should I be looking for a 5” rise mount?

asked by: Henry

0

Expert Reply:

Your assumption is correct. If the distance from the ground to the top of the receiver opening on trailer hitch # 36798 is 12 inches, and the distance from the ground to the bottom of a level trailer coupler is 17 inches, you would need a ball mount with a 5 inch rise.

Ball mount # 36065 is a good option. It takes a ball with a 3/4 inch diameter shank. For a compatible 1-7/8 inch ball you can use # 19256. For a 2 inch ball use # 19258.

For trailer wiring if your 2017 Chrysler Pacifica is a Limited, Touring L, or Touring L Plus use # 118712. If you have an LX or regular Touring model use # 118723. And if you have a Touring Plus (not to be confused with the Touring L Plus) use # C59496.

expert reply by: Michael H

0

Answer 1

I recommend the etrailer Trailer Hitch Receiver #e95ZR for your 2023 Hyundai Palisade. I like the etrailer hitch over the others that we offer because it has a hidden design that will give you a clean off the factory look when the hitch is…

view full answer...

Answer 2

I checked with the manufacturer and was able to confirm the fit for your 2023 Hyundai Palisade is the Curt Trailer Hitch Receiver #C13427.

view full answer...

Answer 3

This is very common in hitches like the etrailer Hitch part #e95ZR. It is done to eliminate the need to trim the bumper cover and still get as much ground clearance as possible. It is likely that the bumper cover will get few blemishes on it since…

view full answer...

Answer 4

The etrailer Hitch item #e95ZR you were looking at is confirmed to fit all models of the 2021 Hyundai Palisade, including your Calligraphy model, so the hitch will fit just fine. The #e95ZR has a 500 lbs tongue weight rating and 5000 lbs trailer…

view full answer...

Answer 5

Absoulutely! From the ground to the very bottom of the receiver tube of the etrailer Hitch - 2" #e95ZR, that measurement is 11-1/2" high when installed on a 2022 Hyundai Palisade. This is the tallest ground clearance we offer for a hitch on…

view full answer...

Answer 6

The etrailer Trailer Hitch Receiver part #e98903 is an excellent option for a 2020 Chrysler Pacifica Hybrid. The ground clearance will vary by vehicle but when we installed this on a 2020 Hybrid the distance from the ground to the top inside edge of…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...