Will The etrailer Trailer Hitch Receiver # e98903 Fit 2019 Chrysler Pacifica Touring Plus?

Question

Question:

I have a 2019 Chrysler Pacifica Touring Plus with a 3.6 V6 engine. Will the etrailer class 3 e98903 fit my model? Thanks for your time.

asked by: Morris B

0

Expert Reply:

Yes the etrailer Trailer Hitch Receiver # e98903 is a confirmed fit for your 2019 Chrysler Pacifica Touring Plus.

I recommend installing the T-One Vehicle Wiring Harness # 118712 when you install the receiver. The Mounting Bracket # 18144 will allow you to connect the 4-way to the mounting tab on the receiver.

expert reply by: Bud M

0

Answer 1

The etrailer.com Trailer Hitch Receiver part #e98903 for the 2017 - 2019 Chrysler Pacifica is rated for 4,000 lbs of trailer weight. However, you are only as strong as your weakest component which in your case is the vehicle. If your Pacifica came…

view full answer...

Answer 2

Since you have an older trailer, the brakes could have possibly been switched from electric to hydraulic or the other way around. Even on newer campers, unless it is just purchased from the manufacturer, it would be just a guessing game for someone…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...