bing tracking image
  1. Trailer Suspension Parts
  2. Redline
  3. Hangers
  4. Camper
  5. Car Hauler
  6. Utility Trailer
Rear Hanger for 1-3/4" Slipper Spring

Rear Hanger for 1-3/4" Slipper Spring

Item # 115706S
Our Price: $4.57
Trailer Suspension Parts
Shipping Weight: 0.29 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Great Prices for the best trailer suspension parts from Redline. Rear Hanger for 1-3/4" Slipper Spring part number 115706S can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (46)
  • Q & A (0)
  • Videos (1)
  • Photos

Redline Trailer Suspension Parts - 115706S

  • Hangers
  • Camper
  • Car Hauler
  • Utility Trailer
  • Slipper Springs - 1-3/4 Inch
  • 9/16 Inch Diameter
  • Single Axle
  • Tandem Axle
  • Triple Axle
  • Redline


Used on 1-3/4" Wide "WI" series slipper springs with 9/16" Spring Eye I.D.





Video of Rear Hanger for 1-3/4" Slipper Spring

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - 115706S Review

Today we're going to be taking a look at the rear hanger for 1-3/4 inch wide slipper spring. This part includes one clip style rear hanger. It simply welds onto the frame of your trailer and holds the slipper end of a slipper spring that measures 1-3/4 of an inch wide. As you can see, it's made from a very durable steel construction. It's a weld on installation. A few measurements to go over with you real quick. Edge to edge, it's going to give us a measurement of about 2-7/16 of an inch, right in that area.

Measuring this direction, edge to edge, it's going to give us a measurement of 1 inch. Then top to bottom, it's going to have a hang down height or depth of about 1-3/16 to an inch and a quarter, right in that area. That's going to do it for today's look at the rear hanger for 1-3/4 inch wide slipper springs.


Customer Reviews

Rear Hanger for 1-3/4" Slipper Spring - 115706S

Average Customer Rating:  4.9 out of 5 stars   (46 Customer Reviews)


by:

Great Prices delivery was a little slow but not the fault of Etrailer they were very helpful tracking down my order



by:

As always, etrailer came through. Exactly as ordered, fair priced and arrived sooner than estimated. Great follow-up to let me know when my package would arrive.

Oldswab

10/8/2023

Still working as advertised. Etrailer provides quality products that I trust. If it is important and has to work I buy from these folks.

Etrailer Expert

Mike L.

10/25/2023

@Oldswab Aww shucks, thanks! We're glad that you're happy with your purchase!


by:

Simple weld on rear hanger clip



by:

I just received the slipper spring hanger in the mail and it was exactly the size they said it would be. Customer service was excellent. The representative was very professional and helpful enough to get the actual slipper spring hanger I was looking to purchase and measure it to confirm it was the part I needed. Will be purchasing from etrailer again.



by:

Good quality parts, easy to order and fast delivery.



by:

Nice fit easy weld on instalation!
Along
with fast shipping my job was completed faster than I expected!



by:

The not so easy to find part was just as expected. The order was processed and received way faster than I had anticipated. Would definitely use etrailer again.



by:

Great quality recieved it in an orderly manner



by:

I have purchased a number of items from etrailer.com such ans leaf springs, axle and hub assembly, and other items as well, I recently finished the trailer and it is now on a cross country trip. The trailer has just finished a 3,000 mile leg of this trip and I am told it was so smooth that it could not be felt by the towing vehicle.

Every product I have ordered from etrailer.com has been top quality and has worked extremely well. I would come back again for any of my future trailer needs.



by:

hard to find part is exactly what I nee ded.



by:

This rear hanger was just as they described and they shipped out quickly



by:

I was quite pleased with my purchase ; u bolt kit ,slipper spring hangers and lug nuts ,from etrailer. The products were good quality, the shipping was very reasonable. I would buy from them again.



by:

Exactly what I needed to rebuild my small utility trailer that I use to haul limbs and branches and improve its "dumpability".



by:

very well made perfect replacement for my trailer.



by:

Thought this individual part would be hard to find, not with etrailer!



by:

Perfect replacement ,Great company I tell everyone about your site !!!



by:

Perfect fit and fast service.

Rob L.

9/20/2021

Still working like a charm!



by:

I couldn't believe that you had the part I needed - I couldnt fine locally - You guys made it easy ! Part shipped quick and arrived on time , perfect



by:

Your parts for this trailer is performing like they should,very satisfied with your
products .



by:

Worked as intended. Simple and inexpens ive.



by:

Product went on with very little difficulties,they look great and I like them!!a



by:

Items were shipped quickly, good email tracking and info.
Thank you they worked great.



by:

Just what I needed



by:

Works Great. Prompt shipping as always.



by:

Exactly what I ordered.


25
46
Show More Reviews

See what our Experts say about this Redline Trailer Suspension Parts

  • Hanger Bolt Recommendation for a 3-Leaf Slipper Spring # WIE3
    You need to use a 9/16 inch bolt for the front eye of the 3-Leaf Slipper Spring that your referenced part # SP-178275. For that I would recommend the Spring Eye Bolt with Lock Nut part # 166079. The correct rear hanger is part # 115706S if it's a single axle trailer. Since the spring does not have an eye on the back of it you do not need to match a 9/16 inch bolt to anything.
    view full answer...
  • Replacement Leaf Spring for 1987 Shoreline Boat Trailer 3000 lb
    The most important thing to match when replacing trailer leaf springs is the weight capacity. Which for a trailer that weighs 3,000 lbs I'd recommend going with 3,700 lb axle springs like # SP-040275 which are 30 inches long. This means you'll need to move out your old hangers wider which we have replacements with # 115706S.
    view full answer...
  • Can Slipper Springs be Used in Place of Double-Eye Leaf Springs on a Trailer
    If the trailer currently uses double-eye spring suspension then you will want to use slipper spring hangers if you want to switch spring types. Double-eye hangers would not work in the manner you have described because the shackle bolts are not large enough in diameter. I have included a link to the slipper spring hangers that we offer.
    view full answer...
  • Replacement Slipper Springs for 1985 Harding Boat Trailer
    I do have options for you but exact replacements for old boat trailers are hard to come by. In the majority of cases, items will need to be altered for an exact fit which I assume is what is going to need to be done on your trailer as well. We don't have a slipper spring that is 1-3/4" wide x 28" long (center of eye to end of spring) with a 2,500, 3,000, or 3,500 lb capacity. However, leaf springs will fatten out over time which means the leaf spring that was originally installed on the...
    view full answer...
  • Hanger Spacing Dimensions for Installing Slipper Springs on a Boat Trailer
    When determining the hanger spacing for a slipper spring you want to go with the dimensions that the hanger kit calls for. For example if you were using the slipper spring hanger kit part # APS3SE with the # SP-177275 you would want a distance of 22-11/16" inches between the hangers measured on center. This would put the hanger right at the beginning of the curve on the spring.
    view full answer...
  • Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
    It's hard to see in your picture but is the hanger open on the one side which allows the spring to slide out to the side? It shouldn't be open like that. If you need a replacement hanger we have the # 115706S for if you have a 1-3/4 inch wide spring. Slipper springs slipping out of their hangers is not common, even though saying that out loud and considering the name...it would seem like it would be! It would take a rather larger bump and perfect circumstances normally for a spring to...
    view full answer...
    Image 1 for
  • Mounting a Rear Slipper Spring Hanger
    When welding a metal part to another piece of metal, it is always best to have as much metal touching between the two parts. With this in mind, the majority of customers will weld the top of the hanger to the frame of the trailer, leaving the side with the open portion facing the ground. This will be the same for the rear slipper spring hanger, part # 115706S.
    view full answer...
  • Will Slipper Spring Hanger # 115706S Work with a 2 or 3 Slipper Spring
    As long as the slipper spring you have has a width of 1-3/4 inches and the spring eye diameter is 9/16 of an inch this Rear Hanger for Slipper Spring # 115706S would work well for you. I attached an FAQ article on slipper spring trailer suspension for you to check out also.
    view full answer...
  • Replacement Rear Hanger for Shorelandr Boat Trailer with 1-3/4 Inch Wide Slipper Springs
    If you are looking for a weld-on option we have 1 rear slipper spring hanger that fits 1-3/4 inch wide trailer suspension slipper springs. It is # 115706S. Please note that any welding should be performed by a professional welder. For a bolt-on option we have # CE14017G. I have also included a link to our help article on slipper spring suspension for you.
    view full answer...
  • Replacement Slipper Spring for Lightweight 4 x 8 Folding Trailer
    Do you know the axle capacity? It sounds like you have a lightweight utility trailer. If that's the case, we can get you very close to your original slipper springs. For a 1500 lb axle, use # SP-178275 or # SP-177275 for a 1000 lb axle. Because these springs are about an inch longer than the existing, you'll need to grind off the existing rear hanger and weld a new rear hanger like # 115706S in, about an inch reward of the old rear hanger.
    view full answer...
  • Can Slipper Spring Replace Existing Double Eye Leaf Spring
    You could replace a double-eye leaf spring with a slipper spring like the # e33SR spring you'd looked at, but it's recommended that you remove the existing rear hanger (assuming it's a single axle trailer) with a rear hanger like # 115706S as your existing rear hanger isn't designed for use with slipper springs. You'll also want to choose a spring with sufficient capacity to handle the weight of the boat and trailer. You can choose a higher rated spring than your existing one, but be aware...
    view full answer...
  • Troubleshooting Why Equalizer is Touching Frame on Triple Axle Trailer
    It is common to have a slight variation in the position of your equalizers but one should not be touching the trailer frame. I recommend checking to make sure that you are using the same equalizers, springs, and center hanger size in your set-up.
    view full answer...
  • Does 3-Leaf Slipper Spring w/ Radius End Require a Bushing for Rear of Spring
    For the 3-Leaf Slipper Spring w/ Radius End # e99SR you only need the bushing on the one end, the other end will either sit over a bolt or will fit into a hanger like part # 115706S. If you have a double-eye spring on your trailer then you'll need something like the 25-1/8" Long 3-Leaf Double-Eye Spring # e66SR instead. Attached are some videos for you to check out as well.
    view full answer...

Do you have a question about this Trailer Suspension Part?


Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.