MB Sturgis Propane Hose - 3/8" Male NPT x 1/2" Female Flare Swivel - 4'
(121 reviews)
Price: $33.35
In Stock
MB Sturgis Propane Hose - 3/8" Male NPT x 1/2" Female Flare Swivel - 4'
Item # 100383-48-MBS
Retail:$40.82
Our Price: $33.35
You Save: 18%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (121)
- Q & A (0)
- Photos
MB Sturgis Propane Fittings - 100383-48-MBS
- Hoses
- Supply Hoses
- 4 Feet Long
- 1/2 Inch - Female Flare
- 3/8 Inch - Male NPT
- MB Sturgis
Propane hose lets you connect RV appliances to the main LP supply lines in your RV. Female flare fitting connects to flared fittings found on RV appliances or T-fittings. Male NPT threads connect to your regulator or other fittings.
Features:
- Hose supplies propane gas to appliances in your RV
- Connects to fittings on your oven, water heater, refrigerator, or other appliance
- Female flare end connects to male flare T-fittings or on your appliance
- Male NPT connection hooks up with T-fitting, gas manifold or regulator
- Swivel collars on female end lets you easily hook up line without the hose twisting or kinking
- Durable thermoplastic hose and brass fittings are approved for LP and natural gas
- UL569 / CSA 8.3-1 certified
- Made in the USA
Specs:
- Temperature range: -40 F to 140 F
- Hose dimensions: 48" long x 3/8" inner diameter
- Hose fittings:
- 3/8" Male NPT
- 1/2" Female flare
- Maximum pressure rating: 350 psi
- 1-Year limited warranty
100383-48-MBS MB Sturgis Propane Hose Assembly - 1/2" Female Flare Swivel x 3/8" MNPT - 48"
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
MB Sturgis Propane Hose - 3/8" Male NPT x 1/2" Female Flare Swivel - 4' - 100383-48-MBS
Average Customer Rating: 4.9 out of 5 stars (121 Customer Reviews)
Propane hose lets you connect RV appliances to the main LP supply lines in your RV. Female flare fitting connects to flared fittings found on RV appliances or T-fittings. Male NPT threads connect to your regulator or other fittings.by: David 01/29/2024
Worked fantastic
by: Glenn05/03/2024
This is working great, no problems.
by: William 04/09/2024
Excellent as always.
by: Nancy 02/07/2024
Just what I needed - quick shipping.
by: Michael 02/09/2024
Great service Carol, checked this morning correct part! Will be ordered more stuff soon!
by: Ray 04/26/2023
I purchased this item to replace the original equipment hose connection on our trailer as part of a recall on the propane regulator. This is an exact fit piece and was very easy to install.
by: Steve 08/29/2023
The product like others we have purchased in the past is excellent quality. Especially like that it was made in the US. We had an issue with shipping and Lori in customer service was especially helpful getting the issue resolved.
by: RAMSr08/13/2022
There was three parts ordered they were what I had ordered and they went together very easily and work. The order was on time.
by: Tami05/14/2019
Reasonable price, super speedy shipping and perfect fit. My only suggestion would be to show a ruler/ measurement on the product photo, confirming the diameter of the ends. The female end actually measures 3/4" inside diameter, which threw me off a bit when replacing my old hose. Had to run to Lowes with the hose to confirm my old hose was actually 1/2" female fitting.
by: Daniel08/31/2018
I needed a longer hose to complete my conversion from single to dual tanks on my camper. The hose appears to be of good quality.
The staff at etrailer is great! Very helpful and courteous.
Will continue checking here first for my needs.
Daniel
8/31/2019
No complaints. The hose integrity is still good. No cracks or leakage.
by: Walter07/09/2018
I love the web site. I could see a 360 view of the part and easily get all of its specifications. I was sure the ends were the right ones to fit my trailer. There was even a short video about the part. The price was very competitive and once I ordered the part, it was shipped right away. I chose the economy shipping and of course, the Post Office misdirected the package and it took 2 days longer than expected to arrive, but if I needed it faster, I could have chosen an express delivery for some additional cost.
I needed a replacement hose because rodents ate through my old hose. I wonder if this part is less palatable to rodents?
Rachael H.
7/11/2018
you might consider some of our wire loom # 39035. This is a 10 foot section of it, and it is 38 diameter so it should work for your propane hose, just cut to fit. Maybe if there is one more layer on there it may make it less appealing to the silly critters.
Helpful Links
by: Lewis 06/01/2023
Product looks great, installed it today. Was pretty hard to find and you had!
by: Steven01/08/2021
Went on with no issues. Good quality. I replace regulator while I was at it. Should be done every 10 years
Steven F.
1/9/2022
After 1 year still doing its job. The hose that connects to the nipple does not swivel which make it a pain to put on. Other than that Im glad I got ir.
by: Lee12/21/2018
I purchased this hose to connect a 5 kw Honda gen set to a 12" (low pressure) propane regulator. This is the ideal combination of components for this application.The slightly larger hose is needed (1/2' vs. 3/8") to act as a reservoir given the lower pressure fuel supply. 3/8"mpt is a standard for the regulators.
A well constructed hose, ideal for the application.
by: Ken08/08/2017
Product was as advertised. The only concern was the long delivery time, two weeks. That wasn't so horrible in and of itself, just that I buy a lot of items on line and most cases the delivery time is much shorter.
An interesting aside and no reflection on e trailer it turns out my ancient travel trailer (1969) had a different saw gas pipe where gas service enters he trailer, but the counter lady here in Tucson had the right adapter for 5 bucks. Which works out fine. I believe she said the trailer side is 1/2 inch pipe thread and the hose is 1/2 inch propane thread, but she had the adaptor so I'm a happy camper. Sorry for The t.m.i. Maybe next customer with ancient vintage trailer may benefit from my tale.
by: T McBride04/14/2019
I actually purchased this hose for a vacuum/pressure rig for casting resin in a pressure vessel. This hose was the only one I could find that had the proper ends to work with both the vacuum pump and the vessel, and it works perfectly!
by: Ronald11/21/2017
This product has been worry free for a year now, no cracks,no leaks,no problems.
Ronald D.
11/21/2018
No problems at all
by: Rob05/11/2023
Fit the bill perfectly. Customer Service has been excellent!
Thanks Amy!
by: John09/11/2019
etrailer is great. They have great product descriptions and review videos so that I know exactly what I am buying and how it will fit my needs
I recently received a propane hose from etrailer that had been mis-packaged and therefore was the wrong length. They quickly sent out a replacement hose and now I have what I need.
Thanks a lot to Bryan and the crew at etrailer.
by: Gary H09/07/2017
Just bought a used 5th wheel and hose was leaking and went to local rv repair shop and was out of hose. I ordered it and saved money and was delivered quickly and I would recommend them......
by: Don 07/31/2020
I had to replace my previous hose because it was chewed through by squirrels, I replaced it with this hose and haven't had a problem. That's about all I can ask out of a gas hose.
by: Michael 05/18/2023
All a great company to deal with
by: Tj Large01/20/2020
This propane hose is serving me well. No leaks or other problems one year after purchase. The length was also correct and fit perfectly.
by: James06/18/2022
Great service and high quality merchandise. Those are the reasons I use etrailer for my parts.
by: Mario03/09/2022
It is nice to get the hose I needed with the exact fittings so I didn't have to source adapters, etc. Good quality and fast service. What is not to like?
25
121
Show More Reviews
See what our Experts say about this MB Sturgis Propane Fittings
- Is Propane Pressure Before Regulator High Pressure PropaneThe lines and ports that would mount before your propane regulator would be unregulated propane and not high pressure as high pressure propane is regulated just to a higher pressure. Low-pressure propane burners regulate gas intake to about 6 ounces per square inch, whereas high-pressure burners regulate gas intake to between 1 and 60 pounds per square inch. Pressure in a propane tank regardless of size can range between 100 and 200 psi typically.
view full answer... - Parts Needed to Connect 100 Lb Propane Tank to Water HeaterIt sounds like what you need is a pigtail to go from the tank to a regulator, then from the regulator you'll need a supply hose that's long enough to reach and connect to the to inlet valve (manifold) on your food truck and that has the correct fitting. Below are the parts I recommend: 1. MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 1' # 100833-12 2. MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet # 108220 3. MB Sturgis...
view full answer...
- Is Teflon Tape Needed On Either End Of Sturgis Propane Hose # 100383-48-MBSWhen connecting hoses like the Sturgis Propane Hose # 100383-48-MBS, The 1/2 inch flare swivel fitting does not need any Teflon tape or sealant. Teflon tape or sealant can be used on pipe fittings like the 3/8 MPT on the opposite end
view full answer... - Determining Replacement Supply Line From Regulator To Steel Line On Camping Travel TrailerWhile I cannot say exactly what supply hose you need coming out of your Regulator # 37207-31525, I can help you to determine which hose you will need. Typically you will find a hose like the Supply Hose # 100383-48-MBS coming out of the regulator and down to the solid steel pipe under the trailer. You will need to verify the regulator side has a 3/8" MPT fitting and the steel pipe side is 1/2" FPT. This particular hose is 4' long. If you find you have different connectors or a different...
view full answer... - Installing Battery Isolator 08771 in 2002 Ford ExcursionThe way I read this is that you have a crank battery in your tow vehicle, you have or want to install, an auxiliary (Group 31 deep cycle lead acid) battery that will also be in the tow vehicle with use of the battery isolator to charge this battery. However, in addition you want to connect a second similar (Group 31 deep cycle lead acid) battery installed on a trailer, to this same charge circuit. Yes, the drawing that you have attached shows a circuit that will work for charging the...
view full answer...
- Extension Hose for Dual Propane Tanks After Regulator on RVWe have a large selection of propane extension hoses which I have attached for you. In order to find the correct one we would need to know what type of fittings you need on either end. If you do not know what type of fittings you need then you will want to take a look at the attached help article which explains all of the different types. The back check valve you are referring to is usually built into the leader hose that connects the tank to the regulator so you do not need an additional...
view full answer... - Solution for Needing 4-1/2 ft Long Propane 1/2 inch Diameter Feed HoseWe have a 4 foot section of 1/2 inch propane hose with part # 100383-48-MBS and we also have a 5 foot section with part # 37207-31475 but we do not have a 4-1/2 foot long section.
view full answer... - Parts Needed to Hook Up to 100 lb Propane Tank on 2019 Grand Design Transcend RVFrom what you described it sounds like you're needing the T-Fitting # 103602-MBS along with the Fill Hose # 100019-144 (for your small tank), the Tank Connector # 204037-MBS, and the 2-Stage Propane Regulator # 108221. Attached is a photo of what this setup looks like and below is a full list of the parts you'll need if all you currently have is the 100 lb tank: T-Fitting - # 103602-MBS Fill Hose - # 100019-144 Adapter Hose - # 100284-144-MBS (for an appliance like the Grill # FR51322) Tank...
view full answer...
- Dual Propane LP Tank Setup 100 Lb for RV or Travel TrailerYes, the # 100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the # 204120-MBS fitting that includes a back-check. Without the back-check, your setup would not be RVIA (Recreation Vehicle Industry Association) compliant. You mentioned that you'd like to connect to a T first, before connecting to the regulator. I called my contact at MB Sturgis to...
view full answer...
- Parts Needed to Connect the MB Sturgis Regulator # 108221 to a 1991 Coleman Sun ValleyThe MB Sturgis Horizontal 2-Stage Propane Regulator # 108221 sounds like it is exactly what you are needing for a replacement regulator. To connect your 20 lb propane tank to the regulator you need a pigtail. Since you have about 3' you need to cover I recommend the 36" MB Sturgis Propane Pigtail # 100473-36-MBS. From here you need a 3/8" MPT on one end and then whatever end connects to your 1991 Coleman Sun Valley. The most popular is either a 1/2" flare swivel like part # 100383-48-MBS...
view full answer... - Recommendation For 3/8 Inch Female Flare Swivel x 3/8 Inch MPT Propane HoseI believe we have exactly what you need. I recommend the MB Sturgis High Pressure Propane Hose, Item # 100040-72-MBS. This propane hose has a 3/8 inch male MPT on one end and 3/8 inch female flare swivel on the other. It is 6 foot long and has a maximum pressure rating of 350 psi. I have attached additional information and a video for you to check out.
view full answer... - Propane Hose to Connect Trailer's Propane System to RegulatorThank you for the photo and from that it looks like you have a 1/2 inch fitting, which is common for the hose coming from the propane system on your trailer. However, there are not extensions with a 1/2 inch fitting so we have replacement hoses of different lengths though you'll need to determine if they are the proper length for your needs. - MB Sturgis Propane Hose Assembly - 1/2" Female Flare Swivel x 3/8" MPT - 3 Feet # 100383-36-MBS - MB Sturgis Propane Hose Assembly - 1/2" Female...
view full answer...
- Where Should My Propane and Carbon Monoxide Be Mounted In My TrailerI'll start off by saying that we don't carry any type of copper or flexible steel hoses since those types of gas lines can only be purchased by those who are certified to install them. But we do carry the parts you'll need to get from the propane tank to the regulator and then into your trailer's propane line. To run from the tank to the regulator you'll need something like the MB Sturgis Propane Hose w/Backcheck # 100473-20-MBS which will connect to a Type 1 propane fitting similar to...
view full answer... - Propane Hose Replacement For 18CE Cavagna Group RecommendationSearching by part number it appears the MB Sturgis Propane Hose Assembly # 100383-48-MBS would be the replacemement part you need for at least the 18CE Cavagna Group replacement. The picture received on our end was a duplicate and you mention there's a different connector for it so if there is a different label for the second connector I would be happy to check that one as well. Regarding braided vs. rubber line durability, the braided stainless steel can protects the thermoplastic...
view full answer...
- What Type of Fitting Matches my Propane HoseThe fitting you have described matches the measurements I see on the 1/2" female flare like the one on the MB Sturgis Propane Hose Assembly - 1/2" Female Flare Swivel x 3/8" MPT - 4' part # 100383-48-MBS or the 3' part # 100383-36-MBS. Check out the video my buddy Ellen did on the hose it is linked for you.
view full answer... - Do I Need Sealant For My Gas Pipe, If So, What Is Your RecommendationNo, you will not need to apply tape/sealant to the flare end of your MB Sturgis Propane Hose Assembly - 1/2" Female Flare Swivel x 3/8" MPT - 4', part # 100383-48-MBS. I have included product description links and a video review link below.
view full answer... - Replacement Regulator and Hose for 1992 Marshall M 260Thanks for the pictures! I have a better option for your setup based. It is the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr item # CAM59333. The Camco will work as a replacement for your Marshall 260 Horizontal LP regulator and it includes a P.O.L. connector. It has a 3/8" NPT inlet connector so you will need the MB Sturgis Propane Hose Assembly - 1/2" Female Flare Swivel x 3/8" MPT - 4' item # 100383-48-MBS.
view full answer...
- Does the 1/2 Inch Female Flare Swivel x 3/8 Inch MPT Come in a 12 Inch Length?The MB Sturgis Propane Hose Assembly - 1/2" Female Flare Swivel x 3/8" MPT - 3' # 100383-36-MBS does not come in a 12 inch length. We only have the 3 foot already mentioned, 4 foot # 100383-48-MBS, and 5 foot # 100383-60-MBS. The only hoses in the 12 inch length are the pigtail hoses that connect the cylinder to the regulator.
view full answer... - Replacement Regulator and Pigtail Hose for Champion 3500 Dual Generator Model 100264We do have a hose and regulator that you can use on your Champion 3500 Dual Fuel Generator model # 100264. You can use the Camco Automatic Changeover 2-Stage Propane Regulator # CAM59005, which is a direct replacement for the regulator on your generator. For a LP hose I recommend using the Camco Propane Supply Hose # CAM59153 which has the male inverted flare that will fit that regulator and run to your propane supply. If you need a hose to run from the regulator to the generator, you'll...
view full answer... - Replacement Propane Supply Hose From Regulator to RV Propane Supply LineIt sounds like you're looking for a 3 foot long supply hose; typically the outlet end of a regulator will almost certainly be a 3/8" female NPT and from the picture you sent it looks like you've got a female flare connector on the other end that goes to the metal RV piping. Additionally, since you've said that the piping side is larger it sounds like you're looking for the # 37207-31445 which has a 1/2" Female flare connector on one end and a 3/8" male NPT on the other.
view full answer...
- Regulator and Hose for a Pair of 110,000 BTU Deep Fryers on Food TruckWhat you will need is a 2-stage regulator, either the Vertical 2-Stage Propane Regulator # CAM59313 or the Horizontal 2-Stage Propane Regulator # CAM59323. For hoses you will need a 3/8" MPT to attach to the regulators and since you mentioned 1/2" the 3' Propane Hose Assembly # 100383-36-MBS comes with a 1/2" female flare swivel on the other end. Hose Assembly # 100383-48-MBS is the same thing but 1' longer. Should you need a 3/8" female flare swivel the correct hose assembly is # 100040-48-MBS. I've...
view full answer... - Recommended Hoses and Regulator to Connect 100 Pound Cylinder to Main House Line It sounds like you are needing a hose and regulator to go from your 100 pound cylinder to the house main line. If you have a DOT tank with a Type 1 fitting, you can use a hose like the MB Sturgis Propane Pigtail # 100833-15, which can connect to a regulator like # 108220. From there you can connect a hose assembly like the 4 foot # 100383-48-MBS if your main line uses a 1/2 inch flare fitting. You can also install the Camco Propane Cylinder Gas Gauge # CAM59023 to the tank before the...
view full answer... - Parts Needed to Connect DOT Propane Tank to RVYou will need a regulator to supply your RV with propane as all RV propane accessories are designed for low pressure propane. The first thing you'll need is a pigtail to plug into the DOT cylinder you want to use. For that you'd want the part # 100473-12. Next you'd want a regulator like part # 108220 and then a hose to connect to your trailer. Most likely you'd need the part # 100040-144-MBS which uses 3/8 inch MPT fittings but you might check out the FAQ article I attached to determine...
view full answer...
- Recommendation For Propane Regulator And Propane Hose For 100 Gallon Propane TankWhat you need will depend on what you have. For a regulator, I recommend the Camco Horizontal 2-Stage Regulator, Item # CAM59333, or the Camco Vertical 2-Stage Regulator, Item # CAM59313. If your 100 gallon tank is an ASME that is generally installed in a motorhome then you will need a horizontal regulator like Item # CAM59333. If the tank is not installed in a motorhome then you will likely need a vertical regulator like Item # CAM59313. Both regulators maintain a constant 11 inch w.c....
view full answer...
Do you have a question about this Propane Fitting?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Cole B
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Cody B
Updated by:
Carrie F
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tami
5/18/2020
The hose was an inch longer than the old ones. Was a bit of a trick to position the propane tanks so they attached cleanly and the bends in the hoses didnt rub on the cover while traveling. Otherwise, they have stayed in good shape and working as expected.