bing tracking image
  1. Watersport Carriers
  2. Inno
  3. Paddle Board
  4. Surfboard
  5. Roof Mount Carrier
  6. Aero Bars
  7. Elliptical Bars
  8. Factory Bars
  9. Round Bars
  10. Square Bars
Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards

Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards

Item # INA744
Our Price: $196.88
Watersport Carriers
Shipping Weight: 13 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This locking carrier lets you transport 3 shortboard or 2 longboard surfboards on your roof rack. Ratcheting straps connect over boards and tighten with hand knobs. Integrated pads on carrier protect boards. Easy, clamp-on installation. Great Prices for the best watersport carriers from Inno. Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards part number INA744 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (17)
  • Q & A (0)
  • Photos

Inno Watersport Carriers - INA744

  • Paddle Board
  • Surfboard
  • Roof Mount Carrier
  • Aero Bars
  • Elliptical Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Saddle-Style
  • Inno
  • Clamp On
  • No Load Assist
  • Rear Loading

This locking carrier lets you transport 3 shortboard or 2 longboard surfboards on your roof rack. Ratcheting straps connect over boards and tighten with hand knobs. Integrated pads on carrier protect boards. Easy, clamp-on installation.


Features:

  • Carrier lets you transport 3 shortboard or 2 longboard surfboards on your roof
  • Easy to load with integrated straps
    • Set boards on carrier
    • Wrap long straps over the boards and connect them with hooks to wire looms on short straps
    • Tighten straps down with built-in ratcheting knobs
  • Rubber pads on base of carrier help to protect cargo during transport
  • Adjustable pads and rubber coating on straps protect boards from scratches and scuffs
  • Locking covers secure boards to carrier and carrier to crossbars
  • Easy, clamp-on installation with included hardware
  • Constructed of durable metal, aluminum, and rubber


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
    • Maximum crossbar dimensions: 3-1/2" wide x 1-1/8" tall
    • Minimum crossbar length: 29"
    • Long bolt kit (INISF711 - sold separately) lets you mount rack on crossbars up to 2" tall
  • Minimum crossbar spread: 20"
  • Carrying capacity: 3 short surfboards or 2 longboards
  • Maximum thickness of stacked boards: 1-5/8"
  • Carrier width: 31-1/2"
  • Maximum board width: 23-1/2"
  • Carrier weight: 15.5 lbs
  • Limited lifetime warranty


Inno Surf/SUP/Kayak/Canoe Locker dimensions

Inno Surf/SUP/Kayak/Canoe Locker

This locking carrier lets you safely and securely transport 3 short surfboards or 2 long surfboards on your vehicle's roof rack. The carrier is easy to load and use with integrated straps and ratcheting hand knobs. Adjustable pads on the straps and rubber padding on the carrier base protect your boards during transport. The Locker installs easily with clamp-on hardware.


Easy-to-Load System

Inno Board Locker straps and knob

The carrier is easy to use and easy to load. There are 2 long straps that stretch over your surfboards and secure to 2 short straps. Connect the wire loops on the short straps to the hooks on the ends of the long straps.


Inno Board Locker loaded

Slide your boards onto the padded bars under the connected straps, then tighten down the straps with the ratcheting knobs.


Inno Board Locker tension release

When it's time to remove your cargo, lift the tension release levers under the covers to loosen the straps and unhook them.


Protective Padding

Inno Board Locker pads

Rubber coating on the straps and adjustable corner pads help to protect your boards from scratches and scuffs during transport. Integrated rubber padding on the carrier base also adds protection for your boards.


Simple Installation

Inno Board Locker on roof

The carrier is simple to install and requires no tools. It clamps easily with included hardware to most crossbars. To install, flip the cam lever on the mounting clamp to loosen the bolt and release it from the lower mounting bracket. Slide the bracket under the crossbar and reattach the bolt to the bracket. Tighten the knob and close the lever.


Inno Board Locker adapters

Adapters are included for mounting the carrier on different crossbar styles. Adapter blocks let you mount the carrier to round or square crossbars. Rubber pads are also included for use when mounting the carrier to aero, elliptical, or factory crossbars.


Locking Covers

Inno Board Locker lock

Four locking covers secure your boat or boards to the carrier and the carrier to your crossbars. With the covers locked and closed the ratcheting knobs cannot be turned and the tension-release levers cannot be accessed to loosen the straps. The locked covers also deny access to the mounting hardware so the carrier cannot be removed from your crossbars.



INA744 Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards

Installation Details INA744 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards - INA744

Average Customer Rating:  4.8 out of 5 stars   (17 Customer Reviews)

This locking carrier lets you transport 3 shortboard or 2 longboard surfboards on your roof rack. Ratcheting straps connect over boards and tighten with hand knobs. Integrated pads on carrier protect boards. Easy, clamp-on installation.

by:

I love the racks and the add-on surfboard carrier. It's so convenient to take my surfboard and other equipment like ladders for my work on and off with this system. It's reassuring to know that they are safely secured on the highway without any additional hassle with ropes or other tie-downs.



by:

Really useful and easy to put your board in and out.



by:

Just used them for the first time, wish I knew of these years ago. Boards are held in place securely and extremely easy to secure using the ratcheting mechanism. The crane is a fantastic idea, wasn't sure at first but it raises the back cable enough so the board can slip under it. No more going to the other side of the car to pass the strap under and over, as one must do with buckle style straps. Great product and recommend to all surfers looking for an upgrade to a faster system to secure boards to roof racks with some built in security. Thank You INNO.



by:

Great product



by:

I owned one 5 years ago. I sold the car and ordered another. The quality of the first one was better. This one took over 7 months to arrive. The winding tie down is very cheap and I already have trouble with it. they are not easy and at times get stuck. They are not as well made as the prior tie downs inno had.



by:

Good product. The Inno Board Locker is a quality surf rack and it is straightforward in its installation and use. It is easy to put the boards on the rack and holds them very securely while travelling. I did have a small problem when installing them on my 2019 Subaru Forester with factory crossbars. The crossbars have thicker end pieces on them to attach to the raised rails. These thicker parts are just far enough apart to make mounting the surf rack difficult. I had to mount one end of the rack on the thicker part and the other end on the thinner aero crossbar. The Inno rack is just a bit too wide to mount in between the end pieces on the thinner crossbar iteslf. And it is a bit too narrow to mount on the thicker end pieces. It would be nice if the rack had adjustable end pieces so we could move the ends in/out to compensate for that difference. The INA466 might be a better choice because it doesnt come with a crossbar so the ends of the rack could be moved in/out slightly to accomodate this.



by:

The Inno INA 744 arrived on time and in excellent condition. It fits my factory crossbars like a champ. Easy installation and working with etrailer was professional and a breeze. My long board surfboards fit nicely. Will definitely order from etrailer again!



by:

I gotta say these make surfing prep a much easier experience. There is a bit of a learning curve during the first installation but once you figure it out it’s fairly simple.



by:

I do love the carrier. It is super easy to use which makes it better than many of the household name carrier on the market. 5 stars.



by:

Best carrier we ever used. Secure, holds mutiple boards, simple to use. Everything you could ask for in a carrier.



by:

Great racks. Easy install. Videos posted on e-trailer were helpful and realistic.



by:

Works amazing, rock solid!



by:

Perfect fit - looks good - recommended



by:

Very communicative and responded quickly to all inquiries.



by:



by:



by:


17
17

See what our Experts say about this Inno Watersport Carriers

  • What is the Difference Between the Inno # INA446 and the # INA744?
    In addition to the SUP foam pad difference, the Inno Board Locker Watersport Carrier # INA446 is geared more for carrying a kayak or 2 boards whereas the Inno Board Locker Surfboard Carrier # INA744 is geared more for carrying boards. It can carry up to 3 short boards or 2 long boards. With the # INA744, there are rubber pads (instead of foam) in between the clamps. Since the rubber is attached to the clamps, there will be no manual placement required. I went ahead and attached a demonstration...
    view full answer...
  • Can Malone Paddleboard Carrier be Used on Highway for Hours
    The Malone paddleboard carrier part # MAL75VR doesn't have a mileage limit and as long as you use it properly it will work, but are there more secure options out there that I would rather recommend...yes. The best option would be the Lockrack part # LR47FR which is very secure and easy to use. It's not cheap though. The Inno Board Locker part # INA744 is a great option too that's more secure as well.
    view full answer...
  • Can the Rhino Rack Nautic Stack Be Used to Carry a Surfboard Upright
    I'll start out by saying that the Rhino Rack Nautic Stack # RRS520 is not designed to carry surfboards and I'm not aware of a product that will allow you to hold surfboards in this manner; because of their size and relatively low weight, they're going to be much more susceptible to wind mounted in this manner. I don't believe that a surfboard can be safely secured to roof crossbars in this configuration and the additional movement that would be caused by cross-winds would likely break the...
    view full answer...
  • Parts Needed to Carry 3 Bikes or 3 Longboard Surfboards with a 2018 Honda Civic
    To transport the 3 longboards on the roof of your 2018 Honda Civic I recommend going with the Yakima JetStream crossbars system but with longer bars to accommodate all of your boards. Since the max amount of boards you can stack on a carrier is 2 we have to make sure there is enough room to place the longboards side by side. For a roof rack use the following: 60" JetStream Crossbars # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06182 Fit Kit - # Y06183 Then for carriers I recommend...
    view full answer...
  • Is The Malone AirFlow 2 Compatible With A 2022 Subaru Forester And Inno Surfboard Carrier
    1. Yes, your Inno Board Locker Surfboard Carrier # INA744 would be compatible with the crossbars of the Malone AirFlow2 Roof Rack # MPG215 and the Airflow 2 would be a compatible with your 2022 Subaru Forester raised rails. 2. You can mount the Malone FoldAway-5 # MAL38FR on the crossbars of the Airflow 2 and haul two kayaks. Just be sure to not overload the 165lb capacity of the Airflow 2 crossbars.
    view full answer...
  • Recommended Roof Rack for Surfboards and Skis on a 2023 Subaru Crosstrek
    In order to carry surfboards and snowboards on a 2023 Subaru Crosstrek you'll first need to start with a roof rack, the most popular option due to the price is the Malone AirFlow2 Roof Rack part # MPG216 and it's hard to argue against this option. It features a clamp-on easy install, has aero shaped bars which provides the least about of wind noise, and it has locks for security. In order to secure your gear, I recommend the Inno Board Locker Surfboard Carrier part # INA744 for your surfboards...
    view full answer...
  • How to Carry 2 Kayaks on Roof of 2007 Toyota Prius
    The Inno Board Locker Surfboard Carrier # INA744 is designed for boards so since you're needing to carry kayaks on your 2007 Toyota Prius we need to find you a different solution. There are some kayak carriers that can be installed on a naked roof but they just use foam blocks and we don't really recommend going that route unless you don't plan on transporting the kayak very far or very often. What I recommend doing is installing the Inno square bar roof rack (see parts list below) and...
    view full answer...
  • Roof Rack and Paddleboard Carrier Recommendations for a 2010 Volkswagen Routan
    I recommend using this Inno setup for carrying 2 SUPs on your 2010 Volkswagen Routan: 57" Inno Aero Crossbars - # INXB145-2 Inno Through Feet - # INXS150 Inno Board Locker - # INA744 This setup not only looks sleek but comes with locks for the roof rack AND the carrier so you can feel more confident that your boards won't walk off by themselves if you need to make a pit stop on your journey. The carrier can hold 2 boards up to 23-1/2" wide. I've attached some review videos for you to...
    view full answer...
  • Roof Rack Option for Class C Motor Home to Carry SUPs
    Roof racks that are compatible with a Class C motor home are few and far between, but a track-mounted, adjustable roof rack system like the Rhino-Rack System with Heavy-Duty Crossbars # Y01-140B is not your only option to carry your SUPs on top of your motor home. Since there are not custom fit roof racks for motor homes, a system that installs into the frame of the motorhome along the top edge of the roof is the way to go. You will want to install the crossbar mounts along the outside...
    view full answer...
  • Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
    For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
    view full answer...
  • Longer Bolt Kit Recommendation for Inno Boardlocker Carrier to Fit 2016 Subaru Crosstrek Crossbars
    Inno does offer a longer bolt kit part # INISF711 for use with the Inno Boardlocker part # INA744 you referenced which is designed for attaching to taller crossbars like what it seems like you have.
    view full answer...
  • Difference Between Inno Surfboard/Kayak Carriers INA744 vs INA446
    The two Inno racks you referenced are pretty similar but the difference is that the part # INA446 is geared more for carrying a kayak or 2 boards whereas the # INA744 is geared more for carrying boards. It can carry up to 3 short boards or 2 long boards. Basically the kayak geared rack has higher brackets that lock down for securing a tall kayak and the board orientated carrier has lower brackets for the straps.
    view full answer...
  • Roof Mounted Carrier for 3 Wakeboards pm a 2013 Jeep Grand Cherokee
    What I recommend is to use a paddleboard carrier such as # INA445 or # INA744. They can hold up to 3 paddleboards, which are wider than wakeboards so width isn't an issue, but the vehicle will have to have crossbars. If your 2013 Jeep Grand Cherokee does not have crossbars that run side to side you can add some. I have linked the roof rack main page for your vehicle. You would just have to select either flush mount rails or no existing rails or bars to see the options.
    view full answer...
  • Roof Rack and Surfboard Carrier for 2018 Honda Odyssey with Roof Side Rails
    For your 2018 Honda Odyssey with roof side rails the roof rack system I recommend is Yakima's JetStream bar rack made of parts # Y00426 and # Y33TR. This rack is compatible with the Inno Board Locker Surfboard Carrier # INA744. On your Odyssey this rack will install with a usefully-wide 52-inch bar spread for excellent stability for longer items like surfboards and kayaks. It provides a 165-lbs weight capacity too, which is typically plenty for all common rooftop cargo applications. The...
    view full answer...
  • Is Long Bolt Kit Needed to Install INNO Board Locker on 2016 BMW X3 with OEM Crossbars
    The long bolt kit part # INISF711 that you referenced is designed to allow the Inno Board Locker part # INA744 to fit up to 2 inch tall crossbars. The factory crossbars of your 2016 BMW X3 would not be that tall so this adapter would not be needed.
    view full answer...
  • Recommended Roof Rack and Paddle Board Carrier for 2002 Chevy Silverado
    For your 2002 Chevy Silverado, if you have the extended cab or crew cab I recommend the roof rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # RRVA137B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit # DK227 This rack is rated for up to 130 lbs. For your paddle boards I also recommend using the Inno Board Locker Surfboard Carrier - Locking - Clamp On - 3 Shortboards or 2 Longboards # INA744. This is rated...
    view full answer...
  • Can Inno Board Locker Carry 2 Paddleboards
    The Inno Board Locker Surfboard Carrier # INA744 can transport two boards but only up to 23-1/2" wide, and most paddleboards are wider than that. Instead, I recommend checking out the Thule SUP Shuttle Stand-Up Paddleboard Carrier with Tie-Downs # TH811XT. The # TH811XT is designed to carry two SUPs, and can haul boards up to 34" wide.
    view full answer...
  • Best Roof Rack to Carry a Paddle Board/Surf Board with a 2016 Honda Civic Coupe
    We do have some roof rack options for your 2016 Honda Civic Coupe! The roof rack options we have are from Inno and I recommend going with the aero rack which consists of 54" crossbars # INXB138-2, Through Feet # INXS250, and Fit Kit # INK683. This roof rack has a weight capacity of 100 lbs but you will want to check your owner's manual to see if the roof of your Civic is rated lower. Then to carry your paddle board/surf board I recommend the Inno Board Locker # INA744. This is compatible...
    view full answer...
  • Inno Board Locker # INA744 VS The Inno Locker # INA446 For Carrying Long Boards
    The Board Locker # INA744 is going to be a bit taller of a carrier compared to the Inno Locker # INA446. Both are going to wrap around your crossbars and work with whatever roof rack you may have, the mechanism is the same thing. You're right though, the board locker # INA744 is going to use it's own bar to support the boards. If it were me, I would get the Inno Board Locker just because it can carry 3 shortboards if need be. For you, I think it comes down to clearance. Since you have a...
    view full answer...
  • Roof Rack for 2023 Chevy Bolt EUV for 2 Surfboards
    The Yakima Corebar roof rack part numbers # Y00421, # Y53TR, # Y00245 would be a great roof rack for your 2023 Chevy Bolt EUV to carry two surf boards with a carrier like the Inno Board Locker Surfboard Carrier part # INA744 which can carry up to two boards.
    view full answer...
  • Does Inno Square Bar Roof Rack Fit 2018 Nissan Versa Note Hatchback
    Yep, you are on the money with the parts you need for an Inno square bar roof rack to fit your 2018 Nissan Versa Note: - Inno Square Crossbars # INB127 - Inno Feet for Square Crossbars # INSUT - Custom Fit Kit # INK421 Then to carry your surfboards I recommend the Inno Board Locker Surfboard Carrier # INA744. I really like this carrier because of how simple it is to use and how well it keeps your surfboards secured on your rack. I've added a link to a video review for you to check out...
    view full answer...
  • Roof Board Carrier that can Carry More than One Board
    If you wanted a similar rack to carry 2 boards the Inno Board Locker part # INA744 would be a great option but the Curt you mentioned can only carry one board at a time.
    view full answer...
  • Does Inno Board Locker # INA744 Fit 2014 Nissan Xterra Factory Crossbars
    As long as the crossbars on your 2014 Nissan Xterra are less than 3-1/2 inches wide and 1-1/8 inches tall the Inno Board Locker # INA744 that you referenced will fit and work really well. Check out the review video I attached for this for you to check out as well.
    view full answer...
  • Roof Rack and Surf Board Carrier Recommendation for 2014 Toyota Prius V
    For your 2014 Toyota Prius V the Rhino Rack Vortex Aero Roof Rack part numbers # RRVA126B-2, # RRRLKVA, and # DK195 is a really great option I recommend highly. With this rack you get the quieter aero bar shape, easier install, and higher quality of the nicer racks but at a better price. Then for a surfboard carrier that can carry up to three boards the Inno Board Locker part # INA744 would be a really great option as well.
    view full answer...


< Previous
12



Do you have a question about this Watersport Carrier?


Info for this part was:

Employee Zack K
Video by:
Zack K
Employee Joshua S
Video by:
Joshua S
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video by:
Chris R
Employee Zach D
Video by:
Zach D
Employee John S
Video by:
John S
Employee Tyler C
Written by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Updated by:
Kathleen M
Employee Lisa S
Updated by:
Lisa S
Employee Ronnie R
Updated by:
Ronnie R
Employee Noah M
Updated by:
Noah M
Employee Keith V
Test Fit:
Keith V
Employee Jared G
Test Fit:
Jared G
Employee Savanna B
Test Fit:
Savanna B
Employee Matthew S
Test Fit:
Matthew S
Employee Evangeline M
Test Fit:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.