Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards
(28 reviews)
Price: $348.95
Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards
Item # Y04075
Retail:$444.09
Our Price: $348.95
You Save: $95.14
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (28)
- Q & A (0)
- Photos
Yakima Watersport Carriers - Y04075
- Paddle Board
- Roof Mount Carrier
- Aero Bars
- Elliptical Bars
- Factory Bars
- Round Bars
- Square Bars
- Saddle-Style
- Yakima
- Clamp On
- No Load Assist
- Rear Loading
This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.
Features:
- Roof-mounted carrier holds up to 2 stand-up paddleboards (SUPs) fin side up on your roof rack crossbars
- Integrated stainless steel straps secure your boards to the carrier
- Straps adjust along built-in tracks to accommodate boards up to 36" wide
- Slots on bottom of carrier contain strap ends to eliminate flapping
- Pads on straps protect board rails and provide extra grip
- Integrated rollers let you easily load an oversized board
- Tie-down straps and stainless steel hook secure tail of board to your vehicle
- Secure bottom board if 2 boards are mounted
- UV-resistant, synthetic rubber strips on arms protect your board from scratches
- Simple, clamp-on installation on most crossbars - no tools required
- Adapters included to keep carrier from sliding on round bars
- Same Key System (SKS) locks secure boards to the carrier and the carrier to your vehicle
- Lightweight extruded aluminum with glossy black powder coat finish resists corrosion
Specs:
- Application: round, square, aero, elliptical, and most factory crossbars
- Maximum crossbar dimensions: 3-1/2" x 1-11/16"
- Minimum crossbar spread: 24"
- Carrying capacity: 2 boards
- Weight capacity: 66 lbs
- Maximum stand-up paddleboard width: 36"
- Integrated strap length: 62-1/2"
- Carrier width: 40-1/8"
- Tie-down length: 11' 10"
- Limited lifetime warranty
The SUPDawg lets you carry 1 or 2 SUPs fin side up on your vehicle's roof rack. This padded aluminum carrier includes integrated, adjustable straps, rollers for easy board loading, and a tail tie-down to secure your boards. The SUPDawg mounts to most crossbars without tools, and it includes locks to secure your boards to the carrier and the carrier to your vehicle.
Built-In Straps and Tie-Down Anchor
The carrier has integrated straps that adjust along built-in tracks to snugly secure your boards. The straps can be tightened or loosened by pressing the red buttons on the end of each arm.
Elastomer pads on the straps help grip your boards, and they protect your board rails against strap abrasions. The polypropylene straps and UV-resistant pads will last through many years. And built-in slots in the carrier contain excess strap length to prevent flapping as you drive.
The included tie-down strap acts as an anchor - securing your SUP to your vehicle. The strap connects to a tie-down point on the tail of your board and hooks onto your bumper. If you are carrying 2 boards, secure the strap to the bottom board. A cam buckle lets you adjust the tension, so you can secure your board without damaging it. A flexible elastomer sleeve along the tie-down strap also protects your bumper from abrasions.
Easy Loading with Integrated Rollers
Rollers are built into the ends of the carrier to help load large, heavy boards. Just set your board on the edge of the carrier, and push the board onto your roof.
Simple, Clamp-On Installation
The SUPDawg's mounting clamps fit most crossbar configurations without the adapters. To install, simply place the carrier on your crossbars and turn the integrated handles until the mounting clamps are tightly secured. If you have round crossbars, the included adapters will provide a secure fit, preventing the cradles from twisting or sliding on the bars.
Added Security
Locks on the ends of the carrier secure your board to the carrier and the carrier to your roof rack. After your board is loaded and the straps are pulled through to the back of the carrier, use the locks to secure it in place. Yakima's SKS cores can be swapped out to make all your Yakima locks keyed alike.
8004075 Yakima Sup Dog Roof-Mounted Stand Up Paddle Board Carrier
Installation Details
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Did not arrive in time
Customer Reviews
Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards - Y04075
Average Customer Rating: 4.9 out of 5 stars (28 Customer Reviews)
This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.by: Eric03/24/2023
I use these 2-3 time weekly for my SUP I fish off my SUP and this rack is a great investment for quickness and ease of strapping. Thing I like best about etrailer is how fast I get my stuff.
by: Omar06/04/2019
After doing some research decided to go with the Yakima roof rack setup for our VW Atlas. Love the look and functionality of it all. Got the SUPDawg paddle board carrier to go with it. Love the locking capability for piece of mind when leaving boards unattended. We are VERY happy with our choice. Drove on highway with two paddle boards and it all went smoothly with zero wind noise whatsoever. Definitely worth every penny. Will recommend.
by: Ed C07/17/2016
Received the the Thule accessories and Yakima Supdog from etrailer.com. It was all nicely packed into one box. As the box said, "the bottom of this box should not be the end of the relationship"
I can tell you it won't be! The items were shipped quickly, and they followed up with an email to make sure all was received well. Love the customer service! Also, the Yakima Supdog product is great. Took no time at all to get it on my truck and load up the 2 paddleboards.
It was exactly what I was looking to get!
Thanks!
by: Timothy05/25/2016
The SUPDwag is easy to install and use. Made for Stand Up Paddle boards, but it can work with Surfboards. Wish it was a little bit narrower, hopefully Yakima will make smaller one for the surfing market.
I turned my unit around to the driver's side for loading, also protects rain from getting in the lock when driving.
by: Tauna03/15/2020
Great Product, mounts very well and sturdy to my stock VW carrier bars. Easy to install and easy to use. I would give this 5 stars if the length of the straps had been in the description. If the straps were 75" instead of 65" this would allow for more carry options. If you have 2 sups over 6" thick and 33" wide, I would search for another option. Many hybrid SUPs like ours are over 6" thick and very wide and unfortunately this carrier cannot accommodate 2 of our hybrids due to strap length.
by: Dawn G.09/05/2016
Put these on a Subaru Forrester. Very easy. Love the excess cord storage. Snugged down my paddleboard so well I didn't need the front tie down.
by: John A10/07/2018
When purchased I was concerned that the clamp down to my cross bars wouldn't work. Upon delivery I installed the SUBDawg immediately with no problems what so ever, the universal type clamp worked well. My wife and I put both paddle boards on after the install and went for a ride up to 70 mph, we felt no movement. The engineering of the tie down is awesome. I highly recommend buying the Yakima SUBDawg.
by: Tara08/04/2022
Fantastic service! Speedy delivery and The sales team follows up with you to make sure you have all the information you need to use what you ordered. Fantastic company. Would highly recommend and I will use them again in the future
by: Andrew 12/05/2021
Competitive price. Works as expected for a year now, no problems and very easy to use. I was surprised etrailer had these in stock while everyone else was out or drastically up charging.
by: Matt J.04/06/2019
Great product. It works very well with two paddle boards. We can’t wait to use it as much as possible this summer up at Lake Tahoe.
by: Steven 01/06/2021
Great product! Customer service is A+ I will definitely buying from etrailer again. Thank you
by: Scott 11/28/2021
I love etrailer they also have great people help you out when you have questions.
by: Mark 05/18/2021
Mark
5/19/2022
Still works great after a year, easy to load and durable.
by: Robert05/30/2016
Fast shipping. Good price. Nice product. Easy fit and install
by: Al08/11/2021
holds board firmly in place.
by: Mikeh07/24/2022
Delivered as promised.
by: Sheryl 04/29/2020
Great product. Easy to install.
by: JZ10/30/2015
Great communication!
by: Tc10/05/2022
by: Mike 09/10/2022
by: Thomas 10/31/2022
by: John 05/02/2021
by: David 12/21/2020
by: Russell 04/08/2021
by: Mauricio 07/22/2022
25
28
Show More Reviews
See what our Experts say about this Yakima Watersport Carriers
- Will the Yakima SUPDawg work with the Malone Roof Rack SystemsIf your Lexus RX450h has the raised factory side rails the Malone AirFlow2 Roof Rack part # MPG216 is a great easy to use roof rack. That will fit perfectly. If it does not have the raised factory side rails but has a bare or naked roof instead a kit consisting of the Inno Aero Crossbars part # INXB138-2, Inno Through Feet for Aero Crossbars part # INXS250 and the Custom Fit Kit part # INK868 will do the trick. Both of these will work out great with the Yakima SUPDawg Stand-Up Paddleboard...
view full answer... - Recommended Stand Up Paddleboard Rack for TracRac Ladder Rack CompatibilityThe Thule SUP Taxi XT Stand-Up Paddleboard Carrier # TH810001 does have straps that when fully extended will fit around the TracRac Crossbars. I can't confirm this to be true for the Yakima SUPDawg # Y04075 on the wide TracRac crossbars because of their size. If you want the cleaner look, I instead recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445 or the Lockrack Watersport Carrier # LR54FR. These options will mount to the channels...
view full answer... - Rooftop Carriers for SUP and SkisYakima's SUPDawg Stand-Up Paddleboard Carrier # Y04075 does resemble a rooftop ski carrier but it is designed specifically for use with SUPs which can be 4 to 5-inches thick, a good bit thicker than many skis are when stacked together. Ski carriers like the Rhino-Rack # RR576 can be used with skis or with snowboards (or even fishing poles) but they will not be able to fit a much thicker item like a SUP. What might work for you is a cost-effective combination of a ski carrier, such as the...
view full answer... - Will Yakima SUPDawg Hold 2 Stand Up Paddleboards in Protective BagsThe protective bag material is usually not very thick so you should not have any problems loading the 2 stand up paddleboards onto the Yakima SUPDawg, # Y04075. This carrier will accept 2 boards up to 36 inches wide so provided the boards are within those specs you should be good to go.
view full answer... - Paddleboard Carrier and Roof Rack Recommendation for 2017 Mazda CX-5The Yakima Paddleboard Carrier SUPDawg part # Y04075 that you referenced will be a great option, but let's get you set up with a roof rack on your 2017 Mazda CX-5 first. For that the Yakima aero bar roof rack that consists of part numbers # Y00425, # Y28TR, # Y06130, and # Y06154 is a confirmed fit and would work well. The bars of this give the least amount of wind resistance which means minimal wind noise.
view full answer... - Recommendation for a Roof Rack and Paddle Board Carrier for a 2012 Jeep Wrangler Hard TopFor your 2012 Jeep Wrangler Unlimited, I recommend the Thule Roof Rack System, # TH712500 bars and # TH65BJ Thule Gutter Feet. This roof rack will mount to the roof rain gutter of your 2012 Jeep. The square load bars of the rack have a weight capacity of 165 lbs. However, this weight capacity is the breaking point of the bars and not the carrying capacity for your specific vehicle. You will have to check you owner's manual to find out your roof carrying capacity. The Yakima SUPDawg paddleboard...
view full answer... - Canoe, Kayak, and Paddleboard Carrier Recommendation for Yakima Rack and RollPaddleboards are too thin to carry vertically with a Yakima JawLow part # Y04073 and have them be secured as safely as they'd need to be. You really will need a rack for each item on your Rack and Roll # Y08107. The etrailer J-Style Carrier part # e98878 would be great for the kayak, then for the canoe the KeelOver part # Y04069, and finally for the paddleboard you'd want the SUPDawg part # Y04075.
view full answer... - Roof Racks And SUP Carrier Recommendation For 2012 Toyota Prius V And 2014 BMW X5The first thing you will want to do is find out what the roof weight capacity for your 2012 Toyota Prius V and 2014 BMW X5 are. A quality roof rack I recommend for your Prius is the Thule WingBar Evo. This system features premium aluminum crossbars that are some of the quietest on the market. The T-slots on the crossbars allow you to mount a variety of T-slot accessories. To order this roof rack system you need to order part # TH711400, part # TH710501, and part # THKIT1668. The bars...
view full answer... - How to Carry a Kayak and Two Paddleboards on a Yakima Rack and Roll TrailerYour Native Ultimate 12 kayak would work great on the Yakima Rack and Roll Trailer # Y08106 that has 66 inch wide crossbars. The Thule DockGrip part # TH895 would work best on a kayak of your size and then for paddleboard carriers the # Y04075 which can carry up to 2 at a time would work great and would allow you to fit everything on the trailer.
view full answer... - Roof Rack and Paddleboard Carrier for a 2009 Toyota Yaris SedanFirst let's look at roof racks for your gal's 2009 Toyota Yaris sedan. If you want something functional that will get he job done but isn't a custom fit and will be noisy then you can use the SportRack semi-custom roof rack # SR1002. If you want to be boyfriend of the year though I recommend something a little more awesome. Take a look at the new Rhino-Rack ROC25 series roof rack # RR23FR. This rack has a more OEM appearance with the elliptical bars that are integrated into the feet. This...
view full answer... - Recommendation for SUP and Kayak Carrier for 2007 Hummer H2 SUVIt may be possible for you to carry both your kayaks and SUPs on your 2007 Hummer H2. To determine if you have enough room to carry both, you will want to take some measurements. To carry your kayaks on your 2007 Hummer H2 with factory roof rack, I recommend using Thule's The Stacker # TH830. This carrier can hold up to 4 kayaks vertically on your roof. This carrier takes up 6 inches on the crossbar. To the 6 inches of the carrier, you will want to add the depth of each kayaks hull. This...
view full answer... - Recommended Roof Rack and Stand Up Paddleboard Carrier for 2018 Toyota PriusFor your 2018 Toyota Prius, the Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR67TR is an excellent option with the Yakima SUPDawg # Y04075. The carrier width is 40-1/8 inches so it is slightly wider than the rear crossbar but 2 inches shorter than the front. This is the route I would go as it will have less wind noise.. It isn't an issue and will give you a sleek look, but if you want crossbars longer than the carrier, you can instead use the # RRVA126B-2, # RRRLKVA, and # DK467 to...
view full answer... - Roof Rack and Surfboard Carrier Recommendation for 2013 Kia OptimaWhen it comes to a roof rack for your daughter's 2013 Kia Optima, we have several options available. I have attached a link which includes all of the roof racks for her Optima. For a basic but quality option, I recommend taking a look at the Rhino-Rack 2500 Series Roof Rack with Vortex Crossbars, # RRVA126B-2, # RRRLKVA, and # DK283. This system is lightweight yet durable and easy to install. For an aerodynamic rack that provides a much quieter ride, take a look at our Thule WingBar...
view full answer... - Product Dimensions of Yakima SUPDawg Stand-Up Paddleboard CarrierI certainly hope you are able to fit this unit along with your vehicle into your garage. The product dimensions of the Yakima SUPDawg Stand-Up Paddleboard Carrier # Y04075 are L 40.00in x W 6.00in x H 6.00in.
view full answer... - Can Yakima SUP Dawg # Y04075 Carry 32 inch Board Since the max board width for the Yakima SUP Dawg part # Y04075 is 36 inch it would easily work a 32 inch wide and 5 inch tall board like you have.
view full answer... - Can the Yakima SUPDawg Stand-Up Paddleboard Carrier Hold a Paddle Board and Surf BoardThe Yakima SUPDawg Stand-Up Paddleboard Carrier, # Y04075, can handle 2 boards of different sizes so you should not have a problem putting a paddle board and a surf board on the carrier together. I have included a link to a video review of the carrier for you.
view full answer... - Will Yakima SUPDawg Paddleboard Carrier Fit on a 2017 Subaru CrosstrekIf you have the factory roof rack on your 2017 Subaru Crosstrek the SUPDawg paddleboard carrier, part # Y04075, is confirmed to fit. If you don't have the factory crossbars on your Subaru you can add a complete roof rack and still use the SUPDawg. I recommend the Yakima RailBar, part # Y00448-0449. It's a great looking, factory-like roof rack. Check out the video I linked of it on a 2014 Crosstrek. The SUPDawg includes Yakima SKS lock cores already. The RailBar doesn't include locsk...
view full answer... - Will the Yakima SUPDawg Paddleboard Carrier Fit the Rola Ladder Rack on a 2015 Toyota TacomaI am happy to report that both parts are compatible with each other! The Rola crossbars on ladder rack # 59799 are 3-1/8 inches by 1 inch so the Yakima SUPDawg carrier # Y04075 will fit. The carrier is compatible with bars up to 3-1/2 by 1-11/16 inches.
view full answer... - How To Carry 2 Kayak And A SUP On A 2021 Toyota RAV4I can get that rack setup for you. I recommend a Yakima offering. It will consist of the following; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR, Landing Pad 23 for Yakima SkyLine and Control Towers - Qty 4, part # Y98FR, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This rack has t-channel, so it can work with all channel...
view full answer... - Does Yakima SUPDawn Paddleboard Carrier Y04075 Fit Factory Bars of 2020 Jeep WranglerYes the Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs # Y04075 that you referenced is a confirmed fit for the factory crossbars of your 2020 Jeep Wrangler Sahara Unlimited 4-door.
view full answer... - Will the Yakima SUPDawg Fit a 2019 Honda Pilot with Factory Roof RackYes, the Yakima SUPDawg Stand-Up Paddleboard Carrier part # Y04075 will work with the factory roof rack on your 2019 Honda Pilot. The crossbars you have on your Pilot now are of the standard size so the SUPDawg will work just fine along with most of our other rooftop mounted accessories. The SUPDawg comes with locks and tie-downs so you will have everything you need to hit the water with your paddle/surf board once your package arrives.
view full answer...
- Fitting a 2012 Honda Pilot With 78 Inch Roof Cross Bars to Carry a Canoe and Stand Up Paddleboard78" bars on a 2012 Honda Pilot is possible. You will need a specific kit to do so and check your local laws and ordinances for any requirements for flagging your load. If the 78 inch bar, part # Y00411 isn't legal in your area, you can use the 66 inch bars, part # Y00410. To complete the roof rack you also need the TimberLine Towers # Y33TR along with the SL Adapter Kit # Y03536. Your best combination is going to be using two saddle-style mounts that carry the canoe hull side down, as...
view full answer... - Inno Roof Rack and Thule Stand Up Paddleboard Carrier for a 2013 Mercedes-Benz M-ClassThe Inno Square Crossbars, part # INB127 and Inno Feet, part # INFR are compatible with Thule Stand Up Paddleboard (SUP) roof rack system like the Yakima SUPDawg, part # Y04075. On each roof rack acessory page, we list if the product is compatible with square bars, like the Inno crossbars you are looking at. I've included videos of this roof rack system being installed as well as the SUPDawg so you can see them in action.
view full answer... - Replacement Bow and Stern Strap for Yakima SUPDawg Stand Up Paddleboard CarrierI checked with Yakima and the strap you need is # 8860050 for the Yakima SUPDawg Stand-Up Paddleboard Carrier # Y04075 that you have. This is the strap and hook that from from the front/rear of the vehicle to the boards you are carrying with the carrier.
view full answer...
Do you have a question about this Watersport Carrier?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Daron K
Updated by:
Michael B
Updated by:
Manda E
Updated by:
Ashley K
Written by:
Lisa S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dawn G.
9/5/2017
Love it.