bing tracking image
  1. Watersport Carriers
  2. Malone
  3. Kayak
  4. Roof Mount Carrier
  5. Aero Bars
  6. Elliptical Bars
  7. Factory Bars
  8. Round Bars
  9. Square Bars
Malone SeaWing Kayak Roof Rack w/ Tie-Downs - Saddle Style - Clamp On

Malone SeaWing Kayak Roof Rack w/ Tie-Downs - Saddle Style - Clamp On

Item # MPG107MD
Retail:$149.95
Our Price: $134.95
You Save: $15.00
Watersport Carriers
Shipping Weight: 12 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This saddle-style kayak carrier lets you transport 1 kayak on your roof rack. Rear-loading design lets you push kayak onto the cradles from the back of your vehicle. Includes load straps, tie-downs, and mounting hardware. Great Prices for the best watersport carriers from Malone. Malone SeaWing Kayak Roof Rack w/ Tie-Downs - Saddle Style - Clamp On part number MPG107MD can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (51)
  • Q & A (0)
  • Photos

Malone Watersport Carriers - MPG107MD

  • Kayak
  • Roof Mount Carrier
  • Aero Bars
  • Elliptical Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Saddle-Style
  • Malone
  • Clamp On
  • No Load Assist
  • Rear Loading

This saddle-style kayak carrier lets you transport 1 kayak on your roof rack. Rear-loading design lets you push kayak onto the cradles from the back of your vehicle. Includes load straps, tie-downs, and mounting hardware.


Features:

  • Saddle-style carrier lets you transport 1 kayak on your roof rack
  • Rear-loading design makes it easy to push large kayaks onto carrier from the back of your vehicle
    • Load assist (sold separately) reduces the strain of lifting the boat onto your roof
  • Rubber padded cradles hold your kayak on its hull, protecting it from scratches and scuffs
  • Tie-down straps and bow/stern tie-downs secure your kayak to your roof rack and to your vehicle
    • Anchor kit (sold separately) creates temporary mounting points for bow/stern tie-downs
  • Quick and easy clamp on installation on most crossbars - no tools required


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
  • Carrier capacity: 1 kayak
  • Weight Capacity: 75 lbs
  • Dimensions: 27-1/2" long x 6" wide x 4-1/2" tall
  • Strap length (each): 11'
  • Carrier weight: 11.6 lbs
  • Limited lifetime warranty


Malone Crossbar Specs

Rear-Loading, Saddle-Style Carrier

Malone saddle

This rear-loading, saddle-style carrier lets you transport 1 kayak, hull side down. It has V-shaped cradles lined with rubber padding to protect your boat from scratches and scuffs while loading and during transport. This padding also creates friction while you're pushing your kayak onto the carrier, making it less likely that you'll push the kayak too far and potentially have it fall off the carrier and hit your vehicle. And if you struggle with lifting a kayak over your head, you can add a load assist (sold separately) to reduce the strain of loading your boat onto the carrier.


Load Straps and Bow/Stern Tie-Downs

Malone Load Strap Loops

The carrier includes 2 cam-buckle straps to secure your kayak to the carrier. Cutouts on the outside edge of the SeaWing help keep the straps in place while securing and transporting your kayak. A set of bow/stern tie-downs are also included to secure the kayak to the front and back of your vehicle. If your vehicle doesn't have any tie-down points, you can get an anchor kit (sold separately) which will let you create anchor points in the creases of your vehicle's hood and hatch.


Tool-Free, Clamp-On Installation

Malone saddle-style installed

The carrier clamps to most crossbars without the need for tools. Simply set the carrier on your crossbars, slide the mounting brackets over the bolts, and secure them with the T-knobs.



MPG107MD Malone SeaWing Kayak Carrier with Tie-Downs - V-Style - Universal Clamp On

Installation Details MPG107MD Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Malone SeaWing Kayak Roof Rack w/ Tie-Downs - Saddle Style - Clamp On - MPG107MD

Average Customer Rating:  4.8 out of 5 stars   (51 Customer Reviews)

This saddle-style kayak carrier lets you transport 1 kayak on your roof rack. Rear-loading design lets you push kayak onto the cradles from the back of your vehicle. Includes load straps, tie-downs, and mounting hardware.

by:

Easy loading with a secure tie-down. This is the kayak carrier you should get the first time.

I've used flat bars with foam pads - they deform the hull of plastic boats. I've used J-hook style carriers which work well and hold the boat securely without hull deformation, but they increased the windage and are too hard to load on the top of a 4WD pickup.

The Malone SeaWings let me slide the kayak on from the rear of the cab while standing in the pickup bed. I use an old bath mat to protect the cab and I can have the boat loaded and tied down in about 5-10 minutes. I also think the load is much more secure than any of the other carriers I've used, especially if the tie-down strap is wrapped around the load bar. The design of the SeaWing puts the main load out on the curved portion of the hull rather than across the flatter area of the bottom and totally avoids deforming the hull. In 90-100 degree heat this is very important to me.

Great product. I'll probably get a second pair so I can load two boats on the truck.

Mike L.

7/5/2023

Still happy with my Malone SeaWings after a year. Ive gotten a second set so I can load two boats. Ive made some long road trips and have no worries about the kayaks being secure on the rack. Great product.



by:

We are very pleased with this product. My wife's 12.5" and my 17" kayaks are easy to load, tie down and, hold them both securely for highway speeds. Once we are at the launch site, kayaks are just as easily offloaded. Great design, simple and elegant.



by:

Our kayak club has many members that use this carrier. Since I have back issues, I will use mine on a Malone Eco Light trailer toted from to/from the water using a kayak carrier. Note: Being on a low trailer and so 'accessible', instead of the wingnuts, I bought metric hex nuts to double-nut the bolts to add some security.



by:

It was what I expected you need to develop 3 in bolt to fit Thule truck rack



by:

Overall this has been a great acquisition. I live in a townhouse in a largely retirement community where restrictive covenant are...well restrictive. I have a modest sized garage and I would be obliged to store my Hobie PA14 and trailer in the garage or take it off site. The retractable tongue has made storing the trailer a breeze.

I have had no problems with the trailer structurally whatsoever. I had an issue initially with the wheels being badly out of balance but chalk that off to my inexperience. I changed out the tires to another set that was rated for max speeds of 80 mph. My son in law and I put both his kayak and my Hobie on the trailer and we take off to the eastern NC coast or HHI and I've never had a problem. Added a DrawTite hitch silencer which really quieted things down when pulling in my Outback. Malone mounting blocks really work well for my Hobie water wings. Also added a recent spare mounting bracket which also has worked well.

Absolutely no problems with the electric circuits and lights in salt water.

Overall great trailer. Couldn't be happier. Malone makes the best kayak trailers out there. etrailer has been great too with ordering, service , and overall reliability.



by:

I use these when towing an RV and they work perfectly. Seems like ratcheting straps could be built into the wings for simplification.



by:

Exactly as advertised. Easy to install. The bolts were not long enough for our rack (ADARAC) requiring us to buy longer bolts. Not really an issue. We purchased one SeaWing Kayak carrier and one with the load assist for the 12 footer.

Etrailer Expert

Sierra K.

5/3/2022

The Thule Compass Item # TH890000 usually fits most Adarac ladder racks if you did not want to search for other bolts.



by:

Exactly what I wanted, delivery was fast. I am extremely pleased with my purchases.



by:

Replaced my Malone J rack with this SeaWing and have found it much easier to load my kayak by myself! I load from the rear of my Subaru Outback and pushing the kayak up flat is much easier than up and twist; especially after a long paddle!



by:

Well...box arrived it only a few days (great) but UPS left it at top of my 180' driveway...standing in a snow bank, near the road and I only realized it was there when i walked out to get the regular mail (bad).
Opened box and all looks to be in order.
Cannot install it till spring but am very much looking forward to that time.
I had spent a week looking online and wanted a rear loading unit...this one checks all the boxes and appears very well designed.
I would like to have seen one of the t knobs been some type of keyed lock setup for security reasons but not having one is easily resolved once i install product in the spring.
I believe i will be very satisfied with my choosing this Malone product once i am able to
install it in the spring.
(sorry guys...can't do a five as it is WINTER!! and product is sitting in the box till April)



by:

It works as well as I expected it to. The kayak straps to the carrier instead of the rails of the car and movement from wind can be encountered. I found it profitable to add straps that tie the unit and kayak to the car's rails.



by:

Love these malone kayak saddles. Have two on square bars on our Toyota Rav 4. Easy to load from rear of vehicle, which is great for older person like me. My two Pungos look good and are solid on saddles. Better than J style. Recommend!



by:

Easy to install. Holds kayak securely. Incredibly fast shipping. Tremendous customer service.



by:

customer service gets an A+. I am working with a slightly different application for this setup where as I will be installing into the truck bed floor. Have Yakima round bars and need adapters to mount on inside walls of truck bed. Do not want the Kayak sitting high on the bed, just 6 to 10 inches off floor. will update with project



by:

These racks were exactly what I wanted them for. I have slightly heavy fishing kayaks, so this design is so much easier to get my kayaks on my shell of my Tacoma. I have traveled over 600 miles with kayaks on these racks without a single problem they stay perfectly in place. I would definitely recommend these racks!



by:

I have purchased 2 sets. of the Malone Sea Wing's. They are the best. 2015 Ford Explorer. 2 10' Kayak's. 3000 miles & no problem's.



by:

Easy to install and low profile allows me to leave it on and still park car in garage. Wilderness Pungo 12' kayak loads easily from rear of Subaru Crosstrek. No wind noise.



by:

they were what they said they were, gre at



by:

First time using etrailer and was very satisfied with their service. Ordered Malone's SeaWing and can't wait to try it out this weekend. looks like a great product that will serve me well.



by:

Nice design, seem durable, easy to install and use.



by:

Never a complaint with any of my purcha ses!



by:

Great kayak rack. We bought 2 for our 2017 Nissan Rogue and they fit perfectly.



by:

Great fit for kayak, hardware holds great on round bars. Just what I needed!



by:

Very easy to install Will be a little learning curve to use the lift assist.



by:

Rex

8/14/2023

These have worked ok wish they were a little slippier to make it easier to get the kayak off my Subaru. Also, need to custom cut the attachment points to fit my bars on my Subaru - sort of a weird square that does not fit those bars. Lastly, I do not use the attachment points for the straps - just run them around the bars on the car.


25
51
Show More Reviews

See what our Experts say about this Malone Watersport Carriers

  • Does Malone SeaWing Kayak Carrier Fit 3 Inch Wide Crossbars
    Yes, 3 inch wide crossbars are absolutely compatible with, and will allow you to mount, the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD. Three inches is only a bit narrower (by 1/8") than most aftermarket bars like those from Thule and Yakima, and in fact, the Malone aero crossbars are 3" as well, and the SeaWing # MPG107MD fits all of those crossbars. The SeaWing is a nice choice for a kayak carrier as it is really easy to use and comes with the needed tie-downs so you don't...
    view full answer...
  • Can Malone SeaWing Kayak Carrier Be Mounted on Outside Ends of Crossbars
    The Malone SeaWing Kayak Roof Rack w/ Tie-Downs # MPG107MD can be mounted on the ends of the crossbars but only if they are butted up against the legs and your kayaks are pretty light. If you have standard kayaks or you have to mount the SeaWing further out from the legs then this isn't recommended. Let me know if this is the case for you and I can make a different recommendation for you.
    view full answer...
  • Strap Width of Malone SeaWing Kayak Carrier
    The straps on the Malone SeaWing Kayak Carrier # MPG107MD are 1 inch wide.
    view full answer...
  • Can I Fit Two Malone SeaWing Kayak Carriers On 53 Crossbars?
    You won't have an issue installing two of the Malone SeaWing Kayak Carriers # MPG107MD onto your 53" crossbars. This carrier can be clamped down on the crossbars right next to the mounting towers/legs, so you will have enough room for two of these carriers which measure 27-1/2" long. With one carrier slid all the way over, there will be plenty of room for the second carrier. You just may have some of the carrier and/or kayak hanging over the edge of the crossbars slightly which isn't an...
    view full answer...
  • Can The Malone SeaWing Kayak Carrier Handle Boats With A Skeg
    The Malone SeaWing Kayak Carrier with Tie-Downs - Rear Loading - Clamp On, part # MPG107MD, will have some give to it. Many kayaks are designed asymmetrically with regard to the keel and the skeg. The carrier has two independent mounts to take this situation into consideration. I have included a product link below and a video review link below.
    view full answer...
  • Does Malone SeaWing Kayak Carrier MPG107MD Include One Or Two Carriers?
    The Malone SeaWing Kayak Carrier with Tie-Downs - Rear Loading - Clamp On # MPG107MD includes two carriers, one for the front crossbar and one for the rear crossbar to support one kayak weighing up to 75lbs. If you are needing to carry two kayaks you will need two of the # MPG107MD. I included a video of the # MPG107MD being installed for you to take a look at.
    view full answer...
  • Recommended Low Profile Kayak Carriers For 2021 BMW X5
    Depending on the length of the factory crossbars on your 2021 BMW X5 the best option to carry two kayaks is going to be the Malone SeaWing Kayak Carrier with Tie-Downs - Rear Loading - Clamp On # MPG107MD. This option will only raise your kayaks roughly 2" above your crossbars, and will fit most factory crossbars. Your factory crossbars will need to be at least 29" wide to fit both kayak carriers on the roof. You will also need to check you X5s owner's manual to verify the weight rating...
    view full answer...
  • Carrying 2 Kayaks with Malone SeaWing Kayak Carrier on 2020 Toyota Highlander Limited
    I did some research online and was able to confirm that you will be able to mount two of the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD onto the factory crossbars on your 2020 Toyota Highlander Limited. When installing the two Malone SeaWing Kayak Carrier's # MPG107MD you will need to have approximately 7 inches of clearance between the inside edge of the carriers to ensure that your Hobie kayaks will not hit each other. Make sure to check your vehicle's owners manual to find...
    view full answer...
  • Does Malone SeaWing Kayak Carrier # MPG107MD Fit OEM Bars of 2016 Subaru Outback
    Yes the Malone SeaWing Kayak Carrier # MPG107MD that you referenced does fit the factory crossbars of your 2016 Subaru Outback.
    view full answer...
  • Can Malone SeaWing Kayak Carrier Haul 29 Inch Wide, 12 Foot Long Kayak
    It sure can; there will not be an issue carrying a 29 inch wide and 12 foot long kayak with the Malone kayak carrier you asked about: - Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD The carriers have an overall width of 27-1/2 inches, so you'll need to ensure your crossbars have the necessary length for the width of your kayaks and to fit the carriers.
    view full answer...
  • Will the Rhino-Rack Universal Load Assist Work with a Malone Seawing Kayak Carrier?
    The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading # RR-RUSL will work with a mounted Malone SeaWing Kayak Carrier with Tie-Downs - Rear Loading # MPG107MD. However, since the Rhino Rack Universal load assist fits onto the inside of the front crossbar, the Malone Kayak carrier might have to be fitted a little off center to accommodate the fitting of the Rhino-Rack load assist. If you are looking for a Kayak carrier with load assist, the guaranteed combination with the...
    view full answer...
  • Should Kayak Rest On Upright Arm Padding of J-Style Kayak Carrier
    I am not sure which kayak carrier you have, or how much contact you have with the upright arm, but in general you want it making contact with the padding. It sounds like you have it positioned in a way where it is touching the top edge above the padding. It would be a good idea to check the owner's manual to see what it says for your particular carrier. Ideally, you want as much surface area as possible making contact. That typically doesn't mean it's perfectly flat since kayaks have...
    view full answer...
  • How To Carry Two Kayaks On a 2018 Toyota Highlander With Factory Roof Rack
    In order to mount two kayaks on the top of a 2018 Toyota Highlander with factory roof rack you will need to position the kayaks on their side using j-style kayak carriers, the Malone DownLoader Kayak Carrier part # MPG114MD is what I recommend. This will be the case for pretty much all factory roof racks as very few if any will be long enough to carry two kayaks side by side.
    view full answer...
  • Best Way to Carry Two Kayaks on the Roof of a 2016 Ford Escape
    I do have an option for you but it is very unlikely that you would be able to use two of the Malone SeaWing Kayak Carriers part # MPG107MD side by side on the roof of your 2016 Ford Escape. Instead, I recommend using an upright carrier like the Malone Stax Pro Kayak Carrier part # MPG115MD. This carrier or a similar design will give you the best chance of fitting two kayaks on the roof of your Escape in addition to being much more cost effective. They will however be a little more difficult...
    view full answer...
  • Differences between Malone MegaWing and SeaWing Kayak Carriers
    The Malone MegaWing, part # MPG207 and the SeaWing, part # MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I contacted Malone directly for more information. They are made with the same mold but different plastics. The MegaWing has roughly double the weight capacity of the SeaWing, coming in with 150lbs of capacity and designed for use in larger applications,...
    view full answer...
  • How To Carry Kayaks On Harbor Freight Folding Utility Trailer
    The best option we offer for converting a utility trailer to a recreational use trailer like one that hauls kayaks and canoes is the Malone Crossbar Conversion Kit for Standard Utility Trailer part # MPG475. It comes with brackets, hardware, and crossbars that you will need to install the system. However, the brackets and hardware that attach to the trailer frame may take some altering or swapping out of parts as it really comes down to the specific application which we can't really comment...
    view full answer...
  • Can I Use the Malone SeaWing with a Vapor Old Town 10 Kayak
    Yes. It looks like the Old Town Vapor 10 kayak weighs 47-lbs, so it will work just fine on the Malone SeaWing Kayak Carrier # MPG107MD since the SeaWing can handle kayaks up to 75-lbs. If you're also interested in a load assist system compatible with the SeaWing, you can use the Stinger Load Assist for Malone SeaWing Kayak Carrier # MPG350. I've linked some review videos of these parts for you to have a look at.
    view full answer...
  • Availability of Conversion Kit to Adapt Utility Trailer to Malone Crossbars/Kayak Carrier
    Sounds like you are looking for the Malone Crossbar Conversion Kit part # MPG475. This allows you to convert a standard utility trailer to having a set of Malone Crossbars which you could then use a Malone kayak carrier like the # MPG107MD on.
    view full answer...
  • Should a Malone MegaWing or SeaWing Be Used For an Eddyline Sit-On-Top (SOT) Caribbean Line Kayak
    From what I could find on the Eddyline sit-on-top (SOT) kayaks in their Caribbean line, they do not look to be too drastically arched. Both the Malone MegaWing # MPG207 and the Malone SeaWing # MPG107MD would work great for the style of your kayak. The Malone MegaWing # MPG207 and the Malone SeaWing # MPG107MD actually have the same style and dimensions. The main difference is the MegaWing has a slightly beefed up construction that allows it to carry a kayak that weighs up to 150 lbs....
    view full answer...
  • Recommended Roof Rack And Kayak Carrier Setup For 2014 Subaru Forester
    Since your 2014 Subaru Forester has the factory raised roof rails, then the Malone AirFlow2 Roof Rack - Aero Crossbars 50" Long # MPG215 will be a great option for you. It is easily installed or removed as you can see in the video I attached for you; there are no other crossbar systems available for your vehicle that are as simple as this one. It has built-in locks to keep the crossbars secured to your roof and deter theft. The weight capacity for this system is 165lbs but you will want...
    view full answer...
  • Recommended Crossbar Kit for 14' x 6.5' Aluminum Trailer
    If you have a utility trailer then we do offer a kit that allows you to mount crossbars onto them, the Malone Crossbar Conversion Kit for Standard Utility Trailer part # MPG475 which are then compatible with the Malone SeaWing Kayak Roof Rack part # MPG107MD. This kit attaches to the trailer floor, not the side rails which we don't have any options for. If this won't work, please send a photo of the trailer so I can better assist.
    view full answer...
  • Will The Malone SeaWing Kayak Carrier Work With The Square Malone SteelTop Crossbars?
    Yes, the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD will work just fine with your square Malone SteelTop Roof Rack # MPG202 that are 1-1/4" wide and 7/8" tall. This kayak carrier will also work with round, aero, elliptical, and most factory crossbars. Additionally, this carrier can carry up to 1 kayak that weighs a maximum of 75lbs.
    view full answer...
  • Does Malone SeaWing Kayak Carrier Fit 2016 Ford Explorer With Factory Crossbars
    Yes, your 2016 Ford Explorer with factory crossbars is absolutely compatible with the Malone kayak carrier you asked about: - Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD The SeaWing will clamp easily around your Explorer's crossbars, and your crossbars also have the correct spacing to allow the SeaWing to fit, so this will be a great option for a kayak carrier. The only other thing you may want is a load assist to help get your kayaks up and easily loaded onto the SeaWing,...
    view full answer...
  • Does Malone SeaWing Kayak Carrier Fit 2015 Subaru Outback With Factory Roof Rack
    The factory roof rack on your 2015 Subaru Outback will absolutely be able to mount a pair of the Malone kayak carriers you asked about: - Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD These have universal mounting clamps to fit your Outback's crossbars, and your bars also have the correct spacing to use the SeaWing # MPG107MD; I verified this fit for you with the manufacturer. This carrier comes with the needed tie-downs, but if your Outback doesn't have easy attachment points...
    view full answer...


< Previous



Do you have a question about this Watersport Carrier?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Updated by:
Kathleen M
Employee Jessie B
Updated by:
Jessie B
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Ashley K
Updated by:
Ashley K
Employee Daron K
Edited by:
Daron K
Employee Jonathan Y
Video by:
Jonathan Y
Employee John S
Video by:
John S
Employee Schuyler H
Video by:
Schuyler H
Employee Jonathan S
Written by:
Jonathan S
Employee Evangeline M
Test Fit:
Evangeline M
Employee Charles A
Test Fit:
Charles A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.