Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This locking carrier lets you transport 1 kayak or canoe or 2 SUPs on your roof rack. Ratcheting straps connect over boat or boards and tighten with integrated hand knobs to secure gear. Crossbar pads included. Easy, clamp-on installation.
Features:
Specs:
This locking carrier lets you safely and securely transport 1 kayak or canoe, 2 stand-up paddleboards, or 2-3 surfboards on your vehicle's roof rack. The carrier is easy to load and use with integrated straps and ratcheting hand knobs. Adjustable pads protect your boat or boards during transport, and board pads provide a cushion between the boat and your crossbars. The carrier also installs easily with clamp-on hardware to most crossbars.
The carrier is easy to use and easy to load. There are 2 long straps that stretch over your cargo and secure to 2 short straps. The straps are tightened in place with ratcheting knobs. When transporting a kayak or canoe, load the boat onto your crossbars first. Then connect the straps over the boat - securing the wire looms on the ends of the short straps to the hooks on the ends of the long straps - and tighten them with the hand knobs.
When transporting surfboards or SUPs, connect the straps first. Slide your board onto your crossbars under the connected straps, then tighten down the straps with the ratcheting knobs.
When it's time to remove your cargo, lift the tension release levers under the covers to loosen the straps and unhook them.
Rubber coating on the straps and adjustable corner pads help to protect your boat and boards from scratches and scuffs during transport. Board pads are also included to provide a cushion for your boat. Just wrap the pads around your crossbars and secure them with Velcro straps.
The carrier is simple to install and requires no tools. It clamps easily with included hardware to most crossbars. To install, flip the cam lever on the mounting clamp to loosen the bolt and release it from the lower mounting bracket. Slide the bracket under the crossbar and reattach the bolt to the bracket. Tighten the knob and close the lever.
Adapters are included for mounting the carrier on different crossbar styles. Adapter blocks let you mount the carrier to round or square crossbars. Rubber pads are also included for use when mounting the carrier to aero, elliptical, or factory crossbars.
Four locking covers secure your boat or boards to the carrier and the carrier to your crossbars. With the covers locked and closed the ratcheting knobs cannot be turned and the tension-release levers cannot be accessed to loosen the straps. The locked covers also deny access to the mounting hardware so the carrier cannot be removed from your crossbars.
Average Customer Rating: 4.6 out of 5 stars (14 Customer Reviews)
This locking carrier lets you transport 1 kayak or canoe or 2 SUPs on your roof rack. Ratcheting straps connect over boat or boards and tighten with integrated hand knobs to secure gear. Crossbar pads included. Easy, clamp-on installation.Heavy duty. Easy enough to install. Instructions aren't great, but you can figure it out. The crane is a good idea in theory, but could use some design refinement as it only lifts just enough to tuck a paddleboard underneath. The rachet system is great and the rubber coverings for the wires are super helpful for preventing scratches.
This company couldn’t make these products any easier to setup! Had my roof rack built and installed in roughly an hour (double checking on measurements). I’ll gladly do business again if I need any trailer/roof rack needs. Quick to email notifications for updates as well.
I installed the unit and so far i love it. It holds the kayak very securely, and they are very sturdy and robust
I love this product. I am using it on a jeep wrangler that I pull into a garage with. They fit perfectly so I don't have to take them on and off if I am paddle boarding a few days in a row,but if I do take them on and off, it's a very quick process as well. I would highly recommend.
I have used the Inno Locker a few times over the last year for SUP and surfboard transportation and been pleased with it. Works as advertised and the lock makes it so I don't have to worry if I step away for lunch, etc. Would recommend to anyone.
The Inno Locker was easy to install and it looks great on my vehicle. I used it to carry a SUP board to some lakes about 500 miles from my home and the board was secured the entire trip:)
Very versatile, I use it for both my cars with similar roof racks. Easy to set up. Still holding up very well
This carrier is super simple to use and really secure. The crane support that holds the cables up make it easy to slide the paddle boards into position underneath them. You'll want to make sure you don't over-tighten the padded cables as they can get really tight, but you'll definitely have peace of mind that the boards aren't going anywhere. And the built-in locks are really nice when making pit stops on those longer trips.
Carrier works great with two boards. Installation took less time than it takes to strap two boards on the vehicle.
Works on any width board
Delivery was prompt. Customer service was fantastic.
Easy set up. Feels secure. Pads don't fit our factory cross bars very well.
NEAT HOLDER, LOCKING , EASY TO INST ALL
Do you have a question about this Watersport Carrier?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paula
8/18/2022
Great ! Ive been really happy with them.