Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
5-1/2" Diameter round. LED Trailer light serves 3 functions: stop, turn, and tail. Red lens offers traditional incandescent look. Flush mounts to trailer with built-in flange. Accepts standard 3-prong plug.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the Peterson round, LED stop, turn, and taillight with the gray flange. Now, this is a red, round trailer light that serves three functions on the trailers. Offers a stoplight, taillight, and a turn signal light, and it uses LEDs, which will make great replacements for incandescent lights, 'cause the LEDs will last about 50 times longer. They're more efficient, provide brighter light with less power output. And of course, no bulbs to replace, no brittle filaments. It's a red lens over white LEDs.
I had mentioned it has the gray flange to it, and it mounts on the trailer with this builtin flange.Now, the hardware to mount it, you see the three holes here, that is not included. Now, it does require a four and a half inch diameter round hole for installation. It is designed to accept the industry standard three-prong plug, which we do sell separately. It's part number 431-491, and it's listed on this product page as a related product.This light is made in the USA. The specs on this, the power draw at 12V is 0.13 amps.
Operating voltage is 9V to 16V. The LEDs do have a limited lifetime warranty. Few dimensions, and then I'm going to hook it up and show you what the functions are and how bright it is. Overall dimension from edge is edge is right at 5 1/2 inches. Total depth from the very front to the furthest part back is going to be right at about 1 11/16 inches deep.
The lens itself diameter is 4 1/4 inches. The mounting hole dimensions, in other words these holes here from center to center, it's going to be right at 4 1/4 inches.So what I'm going to do now is we're going to go ahead and plug this in. Here's that three-prong plug we talked about, and it'll plug right into the back. Once you get the holes lined up, just go ahead and plug it in. Now that we got it plugged in, I'm going to go ahead and hook up our connections.
Once we get it hooked up, I'll go ahead and turn off the overhead lights. There we go. Got it all hooked up. There you can see the taillight function. Let me go ahead and turn off the overhead lights. Then you'll be able to see the brake function. So when you apply your brakes, you'll get a brighter light. When you turn on your turn signals, you can see, then you get your turn signal function. Very bright light using LEDs. Going to go ahead and turn back on our overhead lights, turn off our power.But that should do it for the review on the Peterson round LED stop, turn, and taillight with the gray flange.
Average Customer Rating: 4.5 out of 5 stars (6 Customer Reviews)
5-1/2" Diameter round. LED Trailer light serves 3 functions: stop, turn, and tail. Red lens offers traditional incandescent look. Flush mounts to trailer with built-in flange. Accepts standard 3-prong plug.The product probably was correct and looks like it was quality made
The problem is, it has a 3 prong electrical connector, which I didn't have
on my (old light), so I need to talk to you Monday to have you verify which
additional connector product will match up to it. This will be following my
up on making sure it will fit on my trailer first, which I think it will?
I do have a problem with getting a couple of parts at $2 to $3 each and paying the additional around $10 shipping. If I knew I need them, I could have got them with the original order, wasn't told about that connector?
Joel Y.
11/17/2022
Good as gold
They look like they will do the trick. Wish they would have come with the simple wiring.
great products and lightning fast shipp ing
Good light, not what I needed and was very easy to return.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
11/16/2021
We do have the 3 prong connector available as a separate part. It is part # 431-491.
Helpful Links
Accessories-and-PartsPeterson431-491.html