Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
(554 reviews)
Price: $286.87
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
Item # K71-707-02
Retail:$320.54
Our Price: $286.87
You Save: $33.67
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (554)
- Q & A (0)
- Videos (3)
- Photos
- Used (1)
Dexter Trailer Suspension Parts - K71-707-02
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Tandem Axle
- Dexter
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.
Features:
- Lift kit raises your trailer frame to provide 2-5/8" additional clearance between trailer frame and axle
- Designed for use on trailers with tandem, #10 Torflex axles with 2,300 to 4,000-lb capacities
- Spacers attach to side-mount brackets on your trailer's frame
- Not compatible with top-mounted torsion axles
- Includes:
- (4) #10 Frame spacers (003-377-02)
- 24 Plain washers (005-111-00)
- 16 Locking hex nuts (006-126-00)
- 16 Hex screws (007-177-00)
- Distance between bolt holes center to center: 8"
Note: Lift kit cannot be used with Torflex axles with 3" high profile brackets.
K71-707-02 Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
Installation Details
Video of Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dexter Axle Torflex Lift Kit Review
Hi there, trailer owners. Today, we're going to be taking a look at Dexter's Torflex Lift Kit. These are compatible with Dexter's Torflex Axles. This truck lift kit is going to work with your Dexter Axles and your trailer to raise your trailer up. This is going to help level out your trailer. If your truck sits too high, leaving the front end of your trailer jacked up and the back of your trailer down when you're hauling your trailer, this could lead to scraping at the back of your trailer due to the angle, angling it down.
And by leveling out our trailer, it also helps to load the tongue weight properly on our truck. So this is overall just going to increase the driving experience that we're going to feel when hauling our trailer.Our customer had an issue with his truck being too high for his trailer, causing it to haul unlevel. After we got done installing the components here, we can see that our trailer is completely level all the way down, which is going to increase the driving experience inside of our truck just due to the way our trailer is going to handle. The weight's going to be properly distributed onto the back of our truck, which is going to allow us to get proper braking and handling performance at the front. Our customer also has a weight distribution system on here as well to help even out that weight.
All these components are going to work together just to give you the smoothest and best handling performance when driving your truck down the road when hauling your trailer.Other issues some trailers can run into, particularly if they have the swing out arm styles for their support system, is that in certain areas, depending on how level the ground is where you're at and if there's any rough terrain, some of those arms may hit the ground when you're trying to swing them out and then you can't level properly. You have to move it around and adjust until you can find that sweet spot. Lifting the trailer up a couple of inches is going to give you that clearance that you're going to need, so you can more easily get set up and ready to go at your campsite.And this is what our lift kit looks like when it's installed. I've got the wheels off so that you can see the spacers in place here between our axle and the frame. That's where it goes.
Going to give us greater clearance to the ground, so when we're hauling our trailer, we don't have to worry about as much issues with scraping on the ground, particularly if we have leveling jacks and things like that that are hanging down below. And in some cases, depending on your campsite where you park it, you may be so low to the ground in that particular spot that you can't even use your landing gear properly to level out your trailer because they just don't quite meet where they need to.By lifting it up, we get more room to work with on our landing gear so we can get those legs swung out and everything set up properly. And it can also help out with getting it properly set up with your truck. If your truck's lifted up higher than your trailer, then you can haul it uneven. And you want to try to haul it as even as possible to have the proper load and tongue weight on your truck's hitch at the back.
So something like this is going to lift it up and provide that for you. And you can see it comes with all the hardware that we need, brand new hardware for attaching both our axle to our bracket, as well as attaching our bracket to our trailer.One thing you'll want to keep in mind when performing this installation is that you are increasing the distance between your axle and your trailer here by about this much. And depending on your brakes that you have installed, whether they are electric or hydraulic, you may need to extend the wires or the hydraulic lines in order for this system to work properly with your trailer. On the one that we installed today, we did have to add a few inches to the wiring in order to lower it down and be able to have proper travel of our suspension without damaging the wires that go to our electric brakes. And when it comes to the installation, it's considerably easier than many other style of lift kits for different style of suspension.With this style here, with the TorkLift Axles, it's as simple as lifting your trailer up to where it hangs off the ground. You want to give yourself a considerable gap between the ground and your tires when you got it up to ensure that once you get your kit installed, you can get your wheels back on if you did take those off. I would recommend at least four inches between that when lifting it up. But once you got it lifted up, it's as simple as placing your jack underneath, lowering down one side, installing the spacer, and then moving onto the next one. I'd recommend finishing up this axle, doing the other side, and then moving on to your next one. And that completes our look at the Torflex Lift Kit.
Customer Satisfaction Score:
85% were satisfied with this product
15% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift - K71-707-02
Average Customer Rating: 4.6 out of 5 stars (554 Customer Reviews)
Lift kit raises your trailer frame by 2-5/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities.by: Patrick04/21/2024
The package arrived quickly as they said it would. I installed it as per the instructions and the job was easy. My Trail Lite Camper trailer has tandem axles so it was easy to just drive one set of axles up on ramps and install the lift kit on the hanging axle with the trailer hooked to the truck with the brakes locked on the truck. Anyhow, this lift kit was easy to install and did the job of raising the rear of the trailer from 14" to 18" after installation. Everything fit perfectly thanks to talking with Alex of etrailer.com and getting the right kit for my Dexter #10 Torflex axles. Attached are some pictures of before the install, during and after the install. I'm very satisfied. FYI the project goes a lot faster if you have an electric or pneumatic impact wrench to remove the old rusted mounting bolts and installing the new bolts.
by: Heather 05/08/2024
I got these for my 1998 Trail-et gooseneck 2 horse trailer after we upgraded from a 1994 truck to a 2023. The new truck is much taller so I needed to lift the trailer. This kit was perfect, all of the holes lined up perfectly and it gave me the height I needed. The hardest part was cutting the old bolts off the trailer.
by: Tom S.09/28/2023
This trailer sees some use off pavement. The added ground clearance provided by the kit is very helpful. The lifting blocks are well constructed and the hardware is high quality. Installation was straightforward, but great care must be taken when lifting the trailer off the ground to remove the axles and also to ensure that the new fasteners are tightened properly. Not a job for inexperienced mechanics.
by: Andy03/20/2024
This was a very easy install in the driveway. Only a couple hours start to finish.
by: Darrin12/03/2022
Though I have not yet installed the Lift Kit, previous reviews confirm they will work well on my Escape 5.0 TA fifth wheel. Being in Canada and hearing about the poor condition of packages and product being delivered, I had some concerns. However not only did the package arrive sooner than expected, it was fully intact and in good condition. My overall experience with eTrailer has been flawless - thank you!
by: Tim03/28/2024
Arrived quickly just like always with etrailer. The box appears to have been opened and retaped. All the hardware was included. The paint on each of the brackets has been scratched off in many places. So much so, that I will paint them before installing.
by: Philip05/08/2023
The box looked it was previously shipped to someone else, the bag of parts was open and missing a bolt.
Also, the instructions were missing pages.
Katrina B.
5/15/2023
Yikes! Lets get you over to customer service so they can get you those missing pieces.
by: Dave 05/01/2024
Package came, all parts included.
Install a
On my boat trailer took 20 hours.
Done yea.
by: Carl 11/15/2023
Peace of mind is included in the kit! After damaging the steps on our Lance 1995 pulling out of a driveway, I decided it was time to install a lift kit. Installation took a few hours with the help of a friend and his flat driveway. The installation is relatively simple but not for the faint of heart. We jacked up one side at a time, inserted a couple of jack stands, unbolted the axles, and installed the spacers. It's a little tricky reaching all the bolts and nuts, but doable. We've since travelled about 6200 miles with no issues. Nice to know I don't have to be quite as careful pulling out of driveways.
by: James03/05/2024
Awesome experience. I miss-ordered and Kelly quickly got everything straightened out for me. She then expedited the correct kit for me straight to the installation shop!
She emailed me a return authorization UPS shipment voucher minutes later. Outstanding support!
by: Steve08/26/2023
The product shipped fast, but in a broken up box. The parts were scattered throughout and looked used. I was missing some washers and a nut. Included in the box was some parts that didn’t belong with the order. Plus a flat head screw driver insert. For XXX dollars plus tax, the parts could have at least been put in a bag or something. It looks like I got someone else’s return. Not what I expected from etrailer. Waiting for a response from them. I sent pictures and asked if they received them. Nothing back from them yet.
Jenny N.
8/31/2023
My goodness that is not great to hear. I will have our Customer Service team reach out to you.
by: Daniel 01/09/2024
I installed these a year ago on my camper and I took about a dozen camping trips. The parts haven't moved and are still nice and tight. I would definitely order them again.
by: David D04/08/2018
I ordered the Dexter K71-707-02 lift kit for my Haulmark Transport trailer. It was on back order and took two weeks to arrive but etailer.com communicate this to me with a phone call. I thought that was great customer service since most companies these days just email if anything.
The product arrive as described accept for the poor quality finish. I stripped it down and re-painted it. That was not such a big deal since I painted all the parts as I installed them and touched up my axle, hubs and under body while the wheels were off. It installed easily and raised my trailer just as I needed. My trailer was so low it scraped on drives and the rear stabilizer jacks did not have enough room to deploy.
Tip: The nuts in this kit are locking nuts and require a considerable amount of torque to tighten them. I used a pneumatic impact gun that made the job go much quicker.
by: Daren04/12/2019
I cannot comment on the installation as I had a mobile mechanic friend install it. 4hrs is what he charged me.
The stance is much improved. I should have done it years ago.
Daren C.
4/13/2020
We sold the trailer to family. Th we y have towed for over 1000 miles with NO issues.
by: Bryan07/05/2020
Installed lift on Lance 1985 to get the extra clearance for taking the trailer off road.
Product is great, and it was a simple install (took right at 3 hours). I had to buy a 15/16" wrench in order to fit in the tight space, especially when doing the bolt in the side while the bolt to the bottom was in place. Torquing the nuts was a chore now that I am getting older. :)
I used two jacks, one on each side of the axle to lower it uniformly (floor jack and bottle jack). I used two jack stands to hold up the trailer with wheels removed. (I had to raise the jack stands on wood to get the required elevation when I went to mount the tires.) Tools required were 15/16" open end wrench, 15/16" socket with 1/2" drive ratchet, 1/2" drive torque wrench capable of 150 ftlbs. I also used a 1/2" drive adjustable cheater bar to pry the existing bolts loose.
by: Clayton11/18/2023
The lift kit is just what I expected. The delivery was delayed one week. The package was damaged and re-taped. The bag holding the nuts and bolts was busted open and some of them were missing.
by: Harold08/31/2023
Missing 2 nuts, 2 bolts, 2 washers. Kit is useless without all th parts.
Jenny N.
9/6/2023
I want you to have all the hardware that comes with the kit. I will have our Customer Service team reach out to you.
by: Paul03/27/2021
I gave it a 3 based on my experience with installation, however it may have been the axles themselves that were the problem.
1) Couldn’t find a match on the etrailer website, so I had to speak with a rep to only give me Dexter axle’s phone number.
2) The first location for calling Dexter axle couldn’t help me either, so they gave me the number for where they were manufactured (tandem axles).
3) The 3rd call matched the serial numbers of my axles finally and gave me the kit # to order from etrailer.
4) The holes in the lift brackets were drilled for a minimum of 8” o/c, which was perfect for the trailer, but the axles were drilled at 7.75” o/c. This meant having to slot mill all 4 bracket for the axles .25” on each side for bolt clearance.
5) The original nuts and bolts that came off of my axles and trailer were .5” dia bolts, but the ones that came with the kit were WAY too big meaning I needed to either oversize (ream the axle and trailer holes) or buy new bolts, which is what I did.
It has nothing to do with etrailers service. Just wanted people to know what they’re getting into with these lifts sometimes! :
by: Mike12/12/2020
Great kit, great instructions. Took two of us less than two hours to install including relocating brake wires. (However the trailer floor had been removed to resolve other issues and I do trailer repairs for a living) This is exactly what my enclosed trailer needed along with going to a 225 series tire from a 205 I achieved 3” of lift. There were a couple scratches in the paint on my parts but if a guy was really worried a quick touch with a spray can would be fine. I put em on as is. etrailer had these parts to me in under a week on the left coast.
by: Charles07/22/2019
I needed this axle spacer kit due to insufficient wheel well clearance on the used 2008 Jayco trailer we purchased (it turns out that ~2400 trailers left the factory missing this spacer back in 2008).
These spacers arrived quickly and in fine condition. They fit perfectly. NOTE: Installation went ok, but I did this in a campground, on gravel, and in 95-100° heat, so it was not easy and took me 2 full days. If someone performed this in cooler weather on a hard, flat surface it would go faster.
Very satisfied with the quality and with etrailer (I have used etrailer 3 times prior and have had no problems).
by: Charles 09/23/2023
perfect, nice lift parts are well made,easy to install,i replaced both axles same time on 1997 airstream,
by: Kevin 05/16/2024
Perfect fit
by: Michael01/24/2023
Does not have the mounting holes to allow me to space the axle. I will have to drill additional hole 180 degrees of
Jenny N.
1/27/2023
I wanted to ask you more about your experience with the lift kit. You should not have to drill any additional holes and I wanted to ask you a few questions. Would you be able to send a picture? Do you have a #10 Torflex axle?
Jenny N.
2/1/2023
I wanted to ask you more about your experience with the lift kit. You should not have to drill any additional holes and I wanted to ask you a few questions. Would you be able to send a picture? Do you have a #10 Torflex axle?
by: Uhgggggh12/09/2022
Kit worked fine, but it arrived missing several washers. Thankfully I had another kit for our other trailer, so I used some from that kit. Unfortunately, etrailer made getting a few replacement washers 10 times harder than getting the kits. After numerous emails asking several questions;then wanting pictures of the kit and instructions days after it all went in the trash post installation, I'll just buy my own replacement parts. You would think I was asking for a new free kit. Just wanted enough washers to install the other kit.
by: Douglas 07/21/2020
Don't expect the paint on the Brackets to be whole, there is no way they can be with how they are packaged. Regardless, this is a very easy to install lift if you have any mechanical abilities and tools to safely lift your trailer. I called to several RV shops in my area and was quoted 800.00 - 2000.00 to install this kit. It took me 2 hours including hooking the truck to the trailer, gathering tools. Very straight forward install and is as described on the website. We have a 2014 Flagstaff Classic Ultra Light fifth wheel which is 1.5 ton towable and with our 1 ton sitting so high at stock ride height, the rear bumper of the trailer was close to dragging at the slightest dip. Well made and easy to install.
Douglas H.
7/22/2021
Still working great after a year of use. We have teaveled about 5,000 miles with the lift kit and it has continued to performed flawlessly.
25
552
Show More Reviews
See what our Experts say about this Dexter Trailer Suspension Parts
- How to Determine Lift Kit For 2002 Jayco KiwiWe don't have any way of knowing specifically what axle is on a 2002 Jayco Kiwi, so to determine the right lift kit you'll have to take a look at the axle tag to see what it specifies. If you have a Dexter Torflex #10 you would need the Torflex Lift Kit - Tandem Axle # K71-707-02. For a Dexter Torflex #9 you would need two of the Torflex Lift Kit - Single Axle # K71-723-01. If the axle tag is not there you'd have to reach out to Jayco with your VIN for the axle information.
view full answer... - Recommended Lift Kit For 2004 R-Vision Trail Lite Trailer With Tandem Dexter Torsion AxlesIt definitely sounds like your 2004 R-Vision Trail Lite has number 10 axles based on the dry weight and info I can find on that trailer. I recommend you get the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift # K71-707-02. The other axle sizes are way too big for your application, so I'm confident this is the correct kit for your Dexter torsion axles.
view full answer... - Which Axle Lift Kit For 2017 Airstream International 27FB Trailer W/ Torsion AxlesBased on my on the information available for your 2017 Airstream International Signature 27FB I was able to find that you have torsion axles, but while I believe your trailer uses Dexter axles I was not able to confirm this. You will want to check the axle tag located on the center of the axle facing rearward as this will have the brand of axle, and the axle rating. If it is a Dexter torsion axle you will need to know which number axle yours is, and what the axle rating of each axle is. For...
view full answer... - Alternative to Lifting Torsion AxlesUnfortunately we do not have any parts that will allow you to lift your torsion axle. As you stated the lift kits we offer will not work with 3 inch tall brackets so while there is nothing I can offer you in terms of lifting your current axle you do have the option of removing that axle and using a Timbren Axle-Less Trailer Suspension System like the 4" Lift Spindle w/Flange - Off-Road Tires # ASR1THDS03 which is rated for 2,200 lbs and gives you 4 inches of lift.
view full answer... - Lift Kit for 2016 Ultra Lite Signature with Dexter 4,000 lb Capacity Torflex AxlesAccording to the research I did on your 2016 Ultra Lite Signature it has 4,000 lb Dexter Torflex torsion axles so the correct lift kit for it would be the part # K71-707-02 which would give it a 2-5/8 inch lift.
view full answer... - 2018 Micro Mini with Lippert 3,500 Torsion Axles Lift KitBased on the info you listed the correct lift kit for your Lippert torsion 3,500 lb axle is the part # LC270682 which will give you a lift of 2-5/8 inches.
view full answer... - What Is the Correct Lift Kit for an Airstream Trailer with Torsion AxlesI don't know what axles you have on your trailer but if you look at the axle tag it will tell you this. If you can't comprehend the axle sticker then just send me a photo of this and I will be happy to do that for you. There are a few different lift kits for torsion axle trailers but they vary by manufacturer and capacity. I have attached the options below: Tandem Dexter #11 Torflex Axle (4,100 - 6,000 Lbs) # K71-724-02 Tandem Dexter #10 Torflex Axle (2,300 - 4,000 Lbs) # K71-707-02 Single...
view full answer... - Other Options to Raise Trailer Suspension to Allow Trailer to Sit LevelIf your trailer had tandem Dexter 3,500 lb trailer axles and the lift provided by the kit part # K71-707-02 was not enough to level it with your truck you could look into taller tires and wheels. You also should see if you can raise the gooseneck coupler higher to allow the trailer to sit level. It's not super common that horse trailer have torsion axles so I'd verify for sure that's what you have. I attached a page that has all of our wheels and tires available as well as a link to a...
view full answer... - Lift for Dexter Torsion Axle on 2017.5 Lance 1995 Travel TrailerThere are a few lift kits available for torsion axle trailers, but they vary by weight capacity and manufacturer. I can not find the exact axles that are on your 2017.5 Lance 1995 travel trailer, but if you look at the axle tag it will let you know. Your Lance 1995 travel trailer has tandem axles, and a GVWR of 5,700 lbs from what I could find, so it sounds like you have number 10 Torflex axles with 2,300 to 4,000-lb capacities. If this is the case # K71-707-02 would be the lift kit for...
view full answer... - Lift Kit For 2016 Airstream International Trailer With Dexter Torsion AxlesAppreciate that information, and the 410980-02 axle is a Dexter #10 axle, so for the tandem axles on your 2016 Airstream International, the correct lift kit is the following: - Torflex Lift Kit - Tandem Axle # K71-707-02 The # K71-707-02 will give your Airstream a 2-5/8" lift, and you will not need to change out the shocks. This is a pretty common thing for Airstream owners to do and there is no issue with the shocks not fitting so you're all set with just the lift kit.
view full answer... - Correct Lift Kit for an Aluma 8216 Tilt TrailerThe Torflex Lift Kit part # K71-707-02 is correct for your 2020 Aluma 8216 Tilt Trailer as you have 3,500 Lb Dexter Torflex #10 Axles. This kit provides you with a 2-5/8" lift which is currently all that is available. The bolt holes on this lift block are 8" apart on center so they will match what you have now.
view full answer... - How to Determine if Torflex Lift Kit Will WorkWe don't have any way of knowing what axles are on any one trailer so can't directly answer if the Torflex Lift Kit - Tandem Axle # K71-725-02 will fit. To determine the correct lift kit for your trailer you'll need to know the axle you have, which you can find via a sticker directly on the axle. The aforementioned kit is for #12 Torflex axles with 5,500-7,000-lb capacities. That kit is unlikely to be correct for your 2023 Terra Oasis though, as when I googled it the specs came back as...
view full answer... - Compatible Riser Kits For A Continental Race Trailer With Torsion AxlesNot a problem at all, torsion axles have an easy peasy riser kit with multiple height lift options depending on the axle. 2-5/8" Lift # K71-723-01 (designed for use on #9 Torflex axles with 2,000lb capacity) 2-5/8" Lift # K71-707-02 (designed for use on #10 Torflex axles with 2,300 to 4,000-lb capacities) 2-7/8" Lift # K71-724-02 (designed for use on #11 Torflex axles with 4,100-6,000-lb capacities) 3-1/8" Lift # K71-725-02 (designed for use on #12 Torflex axles with 5,500-7,000-lb...
view full answer... - What is the Correct Lift Kit for a 1999 Airstream SafariFrom what I can find on the 1999 Airstream Safari, it would have tandem Dexter 3,000 lb. torsion axles. Which would make the Torflex Lift Kit # K71-707-02 the correct lift kit for your 1999 Airstream Safari.
view full answer... - Recommended Lift Kit for a 2009 Thor Skamper Kodiak 30BHSLI do have lift kits available for torsion axle trailers however, I would need to know exactly what axle you have on your 2009 Thor Skamper Kodiak 30BHSL in order to recommend a set. In order to determine what type of torsion axle you have, you will need to look on the center of the axle for the axle tag. If you can provide me with the brand and model/serial number I would be happy to look this up for you. I have attached a list of our lift kits for you below. Lippert Square Torsion 3,500...
view full answer... - Lift Kit That Fits 2021 Lane 2375 Travel TrailerHey Mark, your 2021 Lance 2375 travel trailer will have came with #10 Torflex axles rated at 3,900lbs per axle. The Torflex Lift Kit # K71-707-02 will provide you with a 2-5/8" lift for your trailer.
view full answer... - Lift Kit for Dexter # 10 Torflex Axle on 2020 Airstream 27FBYour Airstream uses Dexter Torflex # 10 axles. As long as the axle mounting brackets aren't the 3 inch tall high profile brackets, the Dexter # K71-707-02 lift kit for tandem axle trailers would work perfectly for you. I've linked to the installation details as well as to a product description video.
view full answer... - Which Lift Kit Fits 2022 Airstream Flying Cloud 30FBBased on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift # K71-724-02. I recommend verifying this information by checking your axle tags or measuring the distance between your mounting bolts. If they are 9-1/2" apart on center this is the correct kit. If you find that you have a #10 Torflex and the distance between your bolt holes is...
view full answer... - Options to Raise the Overall Height of a 5th Wheel or Travel TrailerInstallation of a replacement pin box like the Lippert 1621 5th Wheel Pin Box - 18,000 lbs # LC1191151 does not raise the overall height of a 5th wheel trailer, but it may give more adjustability to the height of the king pin. I've attached an image of the dimensions of this pin box as well as the adjustability based on hole spacing 2 inches on center vertically. I've attached a link to all of the pin boxes compatible with the 1621 for your convenience. To give you additional trailer...
view full answer...
- How to Tell What Number Torflex Axle is on TrailerThe Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle and having a GVWR of 6,253 lbs I'd guess that you have 2 of the #10 Torflex axles on your trailer so you'll need the lift kit # K71-707-02. This gives you a 2-5/8" lift and will fit unless you have 3" high profile brackets. If your axles...
view full answer... - Option for Lifting Trailer without Leaf SpringsSounds like you have torsion axles which is the other common trailer suspension setup aside from leaf springs. The lift kits we carry fit with specific axles; the # K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit would work for you. There are a number of other lift kits for Torflex axles which I'll list for you. Tandem Axle - 2-7/8" Lift compatible...
view full answer...
- Lift Kit for Dexter 2800 lbs Capacity Trailer AxleYou can identify the axle by the ID tag or sticker affixed to it. If your existing axle is a torsion axle, given the capacity you provided it would be a Dexter # 10 Torflex axle. We do offer a lift kit that provides 2-5/8 inches of lift. For a single axle application, use part # K71-707-01 or for a tandem axle, use # K71-707-02. The kits aren't compatible with axles with the 3 inch tall mounting brackets. If you have a leaf spring axle, with a 2-3/8 inch diameter axle tube, and the axle...
view full answer... - Recommended Lift Kit for 2008 Thor Vortex Toy HaulerWe do have lift kits available for your 2008 Thor Vortex Toy Hauler, depending on the type of axle it is equipped with. If your trailer has torsion axles, instead of axles that are suspended on leaf springs, then you should be able to use one of our Torflex Lift Kits. The Tandem Axle Torflex Lift Kit # K71-707-02 is designed for #10 Torflex axles with 2,300 to 4,000 pound capacities and will provide 2-5/8 inches of lift. Torflex Lift Kit # K71-724-02 fits #11 Torflex axles rated between...
view full answer... - Torflex Lift Kit for 2019 Lance 1995 Travel TrailerBased on some research, I was able to find out that your tandem axle 2019 Lance 1995 travel trailer has a GVWR of 5,700 lbs, and does use Dexter Torflex torsion axles like you mentioned, so the correct lift kit is the Torflex Lift Kit - Tandem Axle # K71-707-02. This kit fits #10 Torflex axles with 2,300 lb to 4,000 lb capacities, a range your axles fall into, and we have also had customers come back and tell us that these are a fit for their Lance trailers, as you can see by the accompanying...
view full answer...
Do you have a question about this Trailer Suspension Part?
Used Items Available
Condition: Surface Scratches
Notes: Item has several scratches and paint damage ont he metal. Otherwise new and unused.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Video Edited:
Chris R
Written by:
Wilson B
Video by:
Jonathan Y
Updated by:
Brian T
Updated by:
Noah M
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Darrin
12/4/2023
Installed the lift kit, followed the instructions and it went very smoothly, took a couple hours with a buddy. 5th wheel now rides level with my F150, product worked as specified, and will continue future purchases with eTrailer as their service and responsiveness is above competitors in our experience.