Peterson LumenX LED Back-Up Light for Truck or Trailer - Weatherproof - 7 Diodes - Oval - Clear Lens
(109 reviews)
Price: $19.45
In Stock
Peterson LumenX LED Back-Up Light for Truck or Trailer - Weatherproof - 7 Diodes - Oval - Clear Lens
Item # M821C-7
Retail:$29.99
Our Price: $19.45
You Save: 35%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (109)
- Q & A (0)
- Videos (1)
- Photos
Peterson Trailer Lights - M821C-7
- Tail Lights
- Oval
- LED Light
- White
- 6-1/2L x 2-1/4W Inch
- Recessed Mount
- Backup
- Peterson
6-1/2" x 2-1/4" Oval. Waterproof, LED trailer light functions as a back-up light. LumenX optics creates a solid panel of light. Recessed mount with grommet (not included). Accepts industry standard 2-wire plug.
Features:
- LED trailer light provides backup light function for trailers and utility trucks
- LumenX optics creates a solid panel of light that illuminates the entire lens
- Skirted weld joint provides added protection against moisture
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Regulated design ensures consistent light output and prevents overheating
- Clear lens over white LEDs
- Compatible with 12V DC systems
- Recessed mount with grommet (421-18 - sold separately)
- Mounts in any 360-degree position
- Accepts industry standard 2-wire PL3 plug (421-29 - sold separately)
- DOT compliant
- Meets FMVSS 108 requirements for automotive lighting
- Made in the USA
Specs:
- Dimensions: 6-1/2" long x 2-1/4" tall x 1-7/16" deep
- Diodes: 7
- Power draw at 12V: 0.23 amps
- Operating voltage: 9V - 16V DC
- 10-Year limited warranty
Manufacturer Cross Reference
Light will work as an exact replacement for:
Maxxima # M63347-X
Grote # 62751-3
Recessed-Mount Light
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
M821C-7 Peterson LumenX LED Back-Up Light for Truck or Trailer - Weatherproof - 7 Diodes - Oval - Recessed Mount - Clear Lens
California residents: click here
Video of Peterson LumenX LED Back-Up Light for Truck or Trailer - Weatherproof - 7 Diodes - Oval - Clear Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Peterson Trailer Lights - Tail Lights - M821C-7
Today we're taking a look at a Peterson Luminex LED backup light. This oval light functions as a backup light for your trailer work truck. It features durable surface mount technology when it comes to the construction of the led circuit board. That design better withstands shock and vibration and allows for improved heat distribution in a thinner construction.It is an LED system. LEDs make great replacements for incandescent lights. They last longer, they burn brighter, they're much more efficient.
With LEDs, you don't have to worry about replacing bulbs or worry about brittle filaments. It does feature a sealed design, so it is protected from the elements. It's a recessed mount installation with a mounting grommet and it also accepts an industry standard two prong plug.Both of those items, the grommet and the plugs are sold separately and available at etrailer.com. It is Department of Transportation compliant. It meets FMVSS 108 requirements for automotive lighting.
And the product's made in the USA. When it comes to the measurements of the light, we'll look at those real quick and then we'll hook it up to power.Edge to edge going this direction. It's about six and a half inches. Edge to edge going this direction. It's about two and one quarter inches.
All right, we'll go and hook it up to power. That way you can see what it looks like with some power running to it. We'll also turn off our overhead lights so you can see it in a low light setting.So when the reverse function is activated, you can see how this will eliminate, sends out a very bright, clear, consistent signal. We're looking at seven white LEDs with a clear lens, so it allows plenty of light to come through. And then the multi diode design really helps optimize the overall light output.
The input voltage for this unit is rated for nine volt to 16 volt DC. That's going to do it for today's look at the Peterson Luminex LED backup light.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
Customer Reviews
Peterson LumenX LED Back-Up Light for Truck or Trailer - Weatherproof - 7 Diodes - Oval - Clear Lens - M821C-7
Average Customer Rating: 4.6 out of 5 stars (109 Customer Reviews)
6-1/2" x 2-1/4" Oval. Waterproof, LED trailer light functions as a back-up light. LumenX optics creates a solid panel of light. Recessed mount with grommet (not included). Accepts industry standard 2-wire plug.by: Will08/01/2020
Easy instillation and very bright. But you must be very thorough that you have the right sized grommet for the hole in the bed or trailer AND for the light you are using. Not all grommets are the same as with trailers and flat beds so make sure that you double check the hole size both ways of the bed and the light to minimize head aches when you go to install.
by: Jeremy 06/10/2020
Worked great as a replacement for reverse light on my flat bed truck
by: James D03/24/2022
As described and fits perfectly into existing holder
by: Brian 04/18/2021
by: Nick05/07/2023
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
by: David04/29/2023
Great product. Did not listen to my salesperson Jesse. I do need the 2 prong adapters.
by: Nick05/07/2023
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
by: Scotty Baccus09/06/2023
Purchased these in April, installed in May. Second trip I made with the trailer in July, the lens fell off one light. No damage, it just fell off.
Neither E-trailer, nor Peterson will warranty the light.
I think it's the last time I spend money with either of them.
by: Jim 03/15/2024
Exactly what you'd expect. Seems to be a good quality grommet-mount LED light. I used it for a mid-ship marker on a gooseneck.
by: Ky04/22/2024
Two of the three lights I installed randomly turn themselves off. At times they also require multiple “touches” to operate, which can get frustrating.
by: Carlos 04/15/2024
The light is very bright and is good quality I love it
by: Robbie 07/30/2023
Good product, nice bright led's
Should last a long time. Great customer service and good website description of product. Etrailer has always been a great company to deal with. Keep up the good work.
by: Kenneth 02/27/2024
perfect timing on the ETA of parts Thanks alot
by: Kevin06/08/2023
Very nice looking lights. Disappointed in that I did not watch the video to see that a harness is needed to wire the lights. I will get them with next order though.
by: Mark 04/27/2023
Bought 4 tail lights only 1 worked right out of the box - had to work with the other 3 to get them to work
by: Marat03/24/2023
Exactly what we were looking for. I do think the description needs to be more clear as I ordered an extra wire that actual came with the light. Other than that received the product earlier than expected and we were able to finish the job for the customer sooner.
by: David01/28/2023
Easy installation. Working perfectly after 1year
by: Ron 10/05/2022
I was worried that the backup lights would not be bright enough, but they’re surprisingly bright for only one segment of the light.
by: DouglasR02/05/2021
I used these to replace the tail lights on my utility trailer. They are bright and because they are LED they will not require any attention. I look forward to many years of reliable service.
by: David 05/05/2023
Thank you for the prompt service.
by: Manhart05/22/2023
These worked great
by: Chad05/07/2022
Perfect replacement for my damaged tail light on our new Timpte 720 aluminum car hauler. Shipping was very quick and packaging was perfect. Thank you for the great service.
by: Scott07/03/2021
Great light but would need to manually turn them on each time you kill the main switch in the horse trailer. Will reorder the same light but without the touch switch in the middle of the lens. Bad on me for being a poor electrician.
by: Matt11/30/2020
Sure would’ve been nice to know the mounting flange and enclosure is plastic.... not one place in the description or video.... disappointed
by: Kenneth 07/21/2022
Tail lights were as advertised and shipping was timely.
25
100
Show More Reviews
See what our Experts say about this Peterson Trailer Lights
- Does Optronics Trailer Clearance Light # M821C-7 Come with Wiring Plug and LeadThe Optronics taillight part # M821C-7 that you referenced does not come with the plug and wiring so you'd need to order that as well with the part # A47PB.
view full answer...
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Edited by:
Daron K
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.