Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
6-1/2" x 2-1/4" Oval. Waterproof, incandescent trailer light provides backup light function. Durable polycarbonate housing and lens. Recessed mount with included grommet. Hardwires with included 2-wire plug. (1) 1156 bulb.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Truck-Lite # 60004C and 60084C
Grote # 62251
Optronics # BU74CB
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Peterson Six and a Half Inch Oval, Clear Back-Up Light with the Two-Pronged Plug and the Rubber Grommet. Now, this oval back-up light will feature a clear Lexan Lens and a VIBAR socket. Now, the VIBAR socket feature is a vibration dampening feature that absorbs shock to help the bulb last longer. This is a sealed oval back-up light that meets the DoT, Department of Transportation requirements in either horizontal or vertical position.The polycarbonate lens is sonic welded to the housing to form a single unit. It does include this nice rubber mounting grommet and the two-pronged right angle plug to complete your installation. Basically, when you go to install this, it's a flush mount installation so you just install your light into the rubber grommet, just like that.
Take your right angle, two-prong plug, like it up with your connection and then just push it in. You can see our wires will come out at a right angle in the very back here.The two wire right angle plug has a 10 and a half inch long, pig tail wire lead that has two wires. The white wire has a ring terminal on it for ground. The red wire is a 12-volt power wire for your reverse circuit.We are going to hook this up later just to show you how bright the light is. Now, the rubber mounting grommet allows the light to be flush mounted so we're going to go ahead and we're going to give you some dimensions.What we're going to do is, let me take it out of the grommet just to give you the dimensions.
So they overall length on this light edge to edge is going to be right at six and a half inches long. Width on it is going to be right at two and a quarter inches wide and your total depth from the front to the very back is going to be right at two and 3/8ths inches deep.So again, I'm going to reinstall it back into the grommet like it was installed on the trailer, and then we're going to do ahead and hook these wires up and, again, we'll take the ground wire. We'll go ahead and hook that wire up and then we'll take our red wire to connect to our 12-volt power.With those both connected, I'll go ahead and turn on the 12-volt power and you can see the clear light, back-up light will light up. We'll go ahead and turn off our overhead lights and you can see it gives you a very bright back-up light.We'll go ahead and turn back on our overhead lights, disconnect our lights. But that should do it for the review on the Peterson Six and Half Inch, Oval, Clear Back-Up Light with the Two-Pronged Plug and the Rubber Grommet..
Average Customer Rating: 4.7 out of 5 stars (25 Customer Reviews)
6-1/2" x 2-1/4" Oval. Waterproof, incandescent trailer light provides backup light function. Durable polycarbonate housing and lens. Recessed mount with included grommet. Hardwires with included 2-wire plug. (1) 1156 bulb.Worked perfectly to replace a light on a 2001 boat trailer
Just what I needed perfect fit
The lights filled up with water and not working I got to get them replaced
Exactly what I needed. Very satisfied with my order and the friendly customer service. I would definitely order from them again.
These exact Peterson lights were installed on a B&W truck bed 21 years ago from factory. Little has changed over time. The gaskets now are a thinner rubber resulting in a sloppy fit in the hole. They should have left well enough alone.
I use these lights in my horse trailer's horse compartment. The price was half what they were on the manufacture's website for replacement. They were shipped the same day I was notified of the shipment and followed up by an easy way to track the shipment.
just what i was looking for. got put in and it works great backing up boat trailer in the dark this is a great light.
Rewiring my boat trailer and Etrailer had everything I needed, great quality and great service
The tail lights are perfect and they came to me in record time .Fantastic job from etrailer Thank You All
Ordered on Monday. Received on Thursday, via USPS. Cant get much better than that!
Package arrived in great condition, parts were exactly what I was looking for. Thank you!
etrailer always comes through with the right part with the right quality. Thank you etrailer!
Bright light and fits well.
Shipping was fast and I received exactly what I ordered! Thank You!
great light
exactly what i needed. delivery was very fast.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/15/2023
While these lights are designed to be submersible I have heard of water still being able to affect the bulbs over time. I recommend changing over to an LED light like part # BUL12CB. While it is more money, the LEDS are protected from water because they are sealed into the unit. Also the LEDs have a lifetime warranty verses the incandescent bulb lights which have a one year warranty.