Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3-3/4" x 2-1/16". LED trailer light serves as a side marker or clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. Single wire design grounds through hardware. PC rated.
Features:
Specs:
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics LED side marker or clearance light. This rectangular LED trailer light serves as a side marker or clearance light when properly mounted. It has the built in reflex reflector, which eliminates the need for a separate reflector. And it is an LED system. LEDs make great replacements for incandescent lights, they last longer, they burn brighter, they're much more efficient. With LEDs you don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments.This unit features the durable polycarbonate housing and lens.
It's a surface mount installation, mounting hardware not included. Surface mount means that it mounts directly to the surface of your trailer, so there's no hole to cut out or grommet needed for the installation.It's a single wire design. This is your power wire right here, and then the unit grounds through mounting hardware on this location right here. You can see it has that metal ring around it That's the ground ring.This is a PC rated unit. It is SAE and Department of Transportation compliant.We're going to go over some measurements and then we'll hook up to power.
Edge to edge in this direction, is three and 3/4 inches. Edge to edge going this direction is about two and 1/16th, right in that area. Overall thickness, that's front to back, is about 15/16ths of an inch. And then the mount holes on the unit are separated on center by three and 1/4 inches.We're going to go ahead and hook it up to power, that way you can see what it looks like with some power running to it. We'll also turn off our overhead lights.
So I'm going to connect the power wire here and then I'll connect to my ground right here.So you can see there that it sends out a really nice consistent signal. It is a multi-diode design, so that means it contains more than one LED. So the multi-diode design really helps optimize the overall light output. The power draw at 12.8 volts is 0.07 amps, and Optronics puts a lifetime warranty on their LEDs.And that's going to do it for today's look at the Optronics LED side marker or clearance light.
Average Customer Rating: 4.9 out of 5 stars (73 Customer Reviews)
3-3/4" x 2-1/16". LED trailer light serves as a side marker or clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. Single wire design grounds through hardware. PC rated.I always enjoy working with trailer. The customer service and ordering people are very helpful, friendly, and professional. They have always taken the time to research questions and provide answers.
This item was a small purchase to replace a trailer clearance light. However, I wanted an exact match to my other lights.
This light arrived several days late due to snow and road closures in our area, not a problem from etrailer. The part is an exact match.
Thank you everyone at etrailer.
Exact replacement for my Carry On trailer side marker lights
I year old and still in perfect working order. Thanks etrailer!
This light works perfectly as a replacement on my utility trailer. So well in fact, I have bought it twice. They have both arrived quickly and were extremely easy to swap out.
Steve
7/13/2023
Still running strong after a year. It crazy how long these last when they dont get bashed into really hard things.
Easy like for like install on a Carry-On trailer. Very bright. It uses LEDs so I never have to change another bulb every time I use try to use the trailer!
William
4/15/2023
They work fine! Happy with the purchase.
These Optronics lights are a direct OEM replacement for the Carry-On trailers. Upgraded to the LED lights on a friend's trailer. Thank you to Etrailer for having plenty in stock.
Exact replacement for Leonard 6x12 Utility Trailer 180 (circ. 2022).
OE look and fit, pur hated to replace same on Carry-On 6x16 7k GTWR utility trailer. Shipped promptly, arrived undamaged, worked perfectly, easy install.
Absolutely love these lights. Super bright LED and shine just as bright today as they did when they were installed over a year ago.
I have bought these before and like them. They are easy to install and when you electrify them....WOW! They are bright. Too bad some guy came along and thought to bust out two of them. But here I am, back for more!
These fit Carryon trailers from [tractor store]. They are excellent bright lights. Unfortunately for me they aren't unbreakable, but I eventually cut that too-close Valencia orange tree down. Yes, a chainsaw was the solution to my trailer light "problem".
TERRIBLE PACKING
I have owned these lights for a year now - having bought them to replace existing marker lights on my utility trailer. After a year, these lights still look and work like new. No sign of UV damage or weathering from the harsh Florida sun. I would definitely buy these again!
Great OEM product for Carry-On trailers equipped with LED lights. Somewhat pricey. Delivery was not as timely as stated, when I ordered product.
Great info about the item on the site enabled me to order with full confidence that I knew what I was getting. I love etrailer and I’ll keep coming back.
They had exactly what I needed for my trailer. In fact the new lights were better than the old. Clearance lights for my trailer.
Perfect replacement light for my traile r.
Love the led trailer lights. Easy to swap and have been trouble free. Thanks.
Exact replacement for my 16' carry on trailer, fender marker light.
Delivered fast and correct parts. Will order from etrailer again.
Perfect fit, high quality and quick shi pping!
Great Product & price. Perfect fit replacement to update my trailer to LED
Definitely will do business again the future
Thanks again
I received my lights today and they have been installed. Work just fine.
Perfect replacement for my carry-on trailer. Very bright
Product was good just a marker light. Want to compliment on the GREAT service. They did better than they said they would. With all of the people trying to take advantage of folks during this rough time, these folks are fantastic. Thank you for being honest, taking ownership and doing what you say.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Hap
3/7/2024
While this is a small part and has worked out perfectly I still use etrailer for my other trailer needs. Thanks