Peterson LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Rectangle - Amber Lens
(9 reviews)
Price: $13.77
In Stock
Peterson LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Rectangle - Amber Lens
Item # M215A
Retail:$37.53
Our Price: $13.77
You Save: 63%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (9)
- Q & A (0)
- Videos (1)
- Photos
Peterson Trailer Lights - M215A
- Clearance Lights
- Rectangle
- LED Light
- Amber
- 3-15/16L x 2-5/16W Inch
- Rear Clearance
- Side Marker
- Peterson
3-15/16" x 2-5/16" Rectangle. Low-profile LED trailer light functions as a side marker or clearance light when properly mounted. Built-in reflex reflector. Surface mount to trailer - hardware not included. 1-Wire design. P2 rated.
Features:
- Low-profile LED trailer light functions as a clearance or side marker light when properly mounted
- Built-in reflex reflector removes the need for a separate reflector
- Waterproof housing and lens unit is submersible
- Great for marine trailer applications
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable plastic housing with acrylic lens
- Amber lens over white LED
- Compatible with 12V DC systems
- Surface mount to trailer - hardware not included
- Single wire design grounds through mounting hardware
- P2 rated
- Made in the USA
Specs:
- Dimensions: 3-15/16" long x 2-5/16" tall x 7/16" thick
- Distance between mounting holes (center on center): 3-1/2"
- Diodes: 1
- Power draw at 12.8V: 0.01 amps
- Input voltage: 9V - 16V DC
- 3-Year limited warranty
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Surface-Mount Light
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
M215A Peterson LED Trailer Clearance or Side Marker Light w/ Reflector - 1 Diode - Rectangle - Amber Lens - Submersible - Surface Mount - P2
Video of Peterson LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Rectangle - Amber Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Peterson Trailer Lights - Clearance Lights - M215A
Today we're taking a look at the Peterson LED Trailer Clearance or Side Marker Might. This is a low profile LED trailer light that functions as a clearance or side marker light when properly mounted.It has the built in reflex reflector, which removes the need for a separate reflector. It is a LED system. It contains one LED. LEDs making great replacements for incandescent lights. They last longer, they burn brighter, they're more efficient.
With LEDs you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.We have a nice, durable black plastic housing with the acrylic amber lens. This is compatible with 12 volt DC systems. Its surface mounts to the trailer, hardware not included. And it's a single wire design, so this is our power wire, and then the unit grounds through the mounting hardware. It is P2 rated.
It's Department of Transportation compliant. Product's made in the USA.Few measurements to go over with you real quick, and then we'll hook it up to power so you can see what it looks like with power running to it. Edge to edge, measures about 3 and 15/16 inches, going that direction. Edge to edge right here is about 2 and 5/16. The overall depth, like we said, it's a low profile light, it's only 7/16 of an inch deep.
Mount holes are separated on center by 3 1/2 inches.All right, we're going to hook it up to power. We'll also turn off our overhead light so you can see it in a low light setting. The other thing I like about this too is, we have these little channels right here, so that's gonna allow us to run our wires out, and still have that flush surface mount installation. So you can see here, the light sends out a really nice clear, consistent signal. Again, it contains a total of one diode or one LED.
LEDs also have a much faster response time when compared to incandescent lights. And with it turned on, you can get a really good look at that built in reflector material that's built into the lens of the unit.That's gonna do it for today's look at the Peterson LED Trailer Clearance or Side Marker Light.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Customer Reviews
Peterson LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Rectangle - Amber Lens - M215A
Average Customer Rating: 4.4 out of 5 stars (9 Customer Reviews)
3-15/16" x 2-5/16" Rectangle. Low-profile LED trailer light functions as a side marker or clearance light when properly mounted. Built-in reflex reflector. Surface mount to trailer - hardware not included. 1-Wire design. P2 rated.by: Alan02/12/2024
The lights themselves are great and look good at night. Installed 7, 2 Reds and 5 Yellows on my horse trailer.
What was not so good was the cost. The Reds at the time I ordered were $x.xx each, while the Yellows were $xx.xx apiece. They are the exact same light with different color lenses. Why is that???
Anyhow, needed them and bought them.
Also, the shipping was right on, arrived quickly.
by: Duane 07/17/2023
Fast and accurate process.
by: Michael 02/15/2020
The wire wasn't right in the middle so had to modify a bit to fit my trailer. Also, not incredibly bright, but it'll serve its purpose.
by: Neta05/03/2024
by: Richard 03/18/2021
by: Joe 05/02/2023
by: Cary 01/22/2024
by: Ross 02/22/2023
by: Tim05/18/2021
9
9
See what our Experts say about this Peterson Trailer Lights
- Single Wire Amber LED Clearance or Side Marker Trailer LightWe have exactly what you are looking for with the Peterson LED Trailer Clearance or Side Marker Light # M215A. This is a single-wire design that grounds through its mounting hardware. This light has a built-in reflector and is made in the USA. I have added a link to a video review of the light for you to check out as well.
view full answer... - Is Peterson M215A LED Clearance Light SubmersibleThe Peterson LED Clearance lamp you're asking about, part # M215A features a sealed LED and circuit board, so it is considered submersible and could indeed be used on your boat trailer.
view full answer... - Does Optronics Offer The Marker/Clearance Light # MCL35A32G With a Red Lens? Currently Optronics only offers the Side Marker Light # MCL35A32G with an amber lens. You might consider the Peterson Light # M215R which is very similar in size and design. This light has the red lens and they also offer it in Amber # M215A.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Installed by:
Cole B
Edited by:
Daron K
Written by:
Brian T
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.