Do The Trailer Suspension Hangers & Equalizers Need To Be Changed Going From 3,500 to 6,000LB Axles?
Question:
How do I choose which kind of axle hangers and equalizers to use for a triple axle trailer. I currently have 3 3500lbs axles and am upgrading to 3 6000lbs axles
asked by: Sean F
Helpful Expert Reply:
You may be able to use the same hangers and equalizers that are already being used on your triple axle trailer. First you will need to determine if you will be changing wheel and tire sizes that will require you to move the axles further apart so that the tires do not contact each other. This may also affect your trailer fenders if the axles are being spread further.
If your tire spacing is okay you will then only need to find the larger capacity leaf springs that match the length of your current leaf springs. If you can provide me with dimensions of your springs I can help find the replacements. You will also need new U-Bolt Kits # APUBR-8 for each axle since you are moving up to a 3" diameter axle.
If you are moving to larger tires you will need to consider the height difference of the larger tires to ensure that you will still have sufficient tire clearance. You will need to add the height of the larger tires to your current hanger height to determine the correct height of the new hangers/equalizers. If you can provide me with the new tire height versus old I can help you find the correct replacement hangers/equalizers.
Products Referenced in This Question
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Trailer Leaf Spring Suspension
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- 7 Inch Long
- Dexter
more information >
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Triple Axle
- etrailer
more information >
Continue Researching
- Q&A: What is Advantage of Never Fail Tandem Axle Suspension Upgrade Hardware Kit Over Other Options
- Q&A: Does Equalizer Need to be Replaced When Using MORryde Shackle Upgrade Kit MR46ZR
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Recommendation for Adding Third Axle To Trailer Suspension
- Q&A: Recommended Hanger Spacing for Triple Axle Trailer
- Q&A: How To Determine Correct Leaf Spring Hanger Spacing for the Dexter Heavy Duty Suspension Kit
- Q&A: What Causes Trailer Suspension Equalizers to not Sit Level
- Q&A: Determining If Dexter Heavy Duty Suspension K71-360-00 WIll Fit 2008 Heartland Cyclone Toy Hauler
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review