How to Determine if a 108 Triple Axle Fender Would Work with the Hanger Kit part # APTT5
Question:
Hello, I have a question about what kind of fenders to use with this suspension kit. I will be using this kit, with 25 1/4inch long leaf springs and 3500 lb axles. Will a fender that measures 108inch x 10 3/4inch work, and also match the center of the fender with the center of each spring ? Or what would you recommend? Thank you for your help
asked by: Danny
Expert Reply:
The distance between the axle centers with the # APTT5 when used with a 25-1/4 inch spring like the # e66SR will be 34 inches.
You would need to compare that dimension to the dimension of the wheel centers on the fender to see if this kit would fit. Tire size will play into this as well. You will need to consider this also.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 25-1/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: TruRyde Trailer Suspension - Leaf Spring Suspension - TREQ105 Review
- Shop: Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Search Results: treq105
- Q&A: Determining If Dexter Heavy Duty Suspension K71-360-00 WIll Fit 2008 Heartland Cyclone Toy Hauler
- Q&A: How To Determine Correct Leaf Spring Hanger Spacing for the Dexter Heavy Duty Suspension Kit
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole
- Shop: Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Shop: Equalizer for 1-3/4" Wide Double-Eye Springs - 6-3/4" Long - 9/16" Center Hole
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole
- Search Results: bronze bushings
- Q&A: Direction of Equalizer # TREQ105 When Installed on Triple Axle Trailer
- Q&A: Will Dexter Suspension Kit # K71-360-00 Fit Raptor Fifth Wheel Trailer with 33 in Axle Spacing
- Q&A: Recommendation for Adding Third Axle To Trailer Suspension
- Q&A: Triple Axle 5th Wheel Trailer Has Center Axle Forward and Backward Movement
- Q&A: Differences Between Triple Axle Hanger Kits APTT1, APTT3, and APTT5
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: leaf spring
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: equalizer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: trailer leaf springs
- Search Results: 25580
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller