Are Side-Frame Mount Jacks Available With Different Gear Ratios
Question:
Is there different gear ratios for the RAM 12k jacks? My gooseneck is VERY tongue heavy with our camper on the front of our gooseneck and cranking it up is a pain.
asked by: Joe O
Expert Reply:
For that I recommend an electric jack set like the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 which has a combined 12,000 lbs of capacity, and offers 38" of lift.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 7000 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 7000 lbs
- Spindles Only
- 79 Inch Long
- 94 Inch Long
- No Drop or Lift
- Dexter
more information >
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Triple Axle
- etrailer
more information >
Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- Landing Gear
- 38 Inch Lift
- Weld-On
- 2 Jacks
- Ultra-Fab Products
more information >
Product Page this Question was Asked From
Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Gears
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Car Camping Checklist
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Q&A: Availability of Dexter Leaf Spring 072-079-00 for 8,000 lb Trailer Axle
- Q&A: Replacement Parts for Ram 12000 Series Jacks
- Q&A: Repair Kit for Ram Series 12000 Trailer Jack
- Q&A: Recommended Dexter Electric Drum Brakes for 4000-lb Axles on 5th Wheel Trailer
- Q&A: Replacement Parts for Pro Series 12000 Trailer Jack
- Q&A: Torque Rating for Spindle Nut on Trailer Hubs
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Performance Chips and Modules
- Article: Trailer Lighting Requirements
Joe
11/6/2018
Is there different gear ratios for the RAM 12k jacks? My gooseneck is VERY tongue heavy with our camper on the front of our gooseneck and cranking it up is a pain.