Recommended Hanger Spacing for Triple Axle Trailer
Question:
Im building a tri axle boat trailer and wonder if you could advise the centr distances from hanger to pivot points . the pivots are the cast triangular type and the spring are 20 inches from eye Regards
asked by: Gary T
Expert Reply:
There will be different dimensions between the hangers. From front to back your hangers for that 20-3/8 inch spring like # e84SR will be 24-3/4 on center then 29 inches on center and finally 24-3/4 inches on center. This will put each of the 3 axles 28-1/2 inches on center. I've attached a photo to assist.
This is all based on 7-3/4 inch curved equalizers and 2-5/8 inch long shackle straps. These are found in the Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center # APTT5.
Products Referenced in This Question
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Triple Axle
- etrailer
more information >
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 20-3/8 Inch Long
- Painted
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
- Shop: Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Shop: Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: MORryde Rubber Equalizers for Triple Axle Trailers - 35" Wheelbase - 8K
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Shop: Hopkins 7-Way Molded Trailer Wire Connector - 11' Long
- Shop: Hopkins 7-Way Blade Style Connector with Molded Cable - Trailer End - 8' Long - Auto Standard
- Q&A: Tandem Axle Hanger Spacing for Double Eye Springs 25-1/2 Inches
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Review of MORryde Trailer Leaf Spring Suspension - Triple Axle Trailer Equalizers - MR39ZR
- Search Results: equaflex
- Search Results: k71~291~00
- Q&A: Troubleshooting Lippert Never Fail Bushings That Don't Install Into Equa-Flex Equalizers
- Q&A: Replacement Wet Bolts and Bushings for Equa-Flex Trailer Suspension
- Q&A: Hanger Spacing Recommendations for a Triple Axle Trailer with 25-1/4 inch Springs
- Search Results: triple axle hanger kit
- Search Results: leaf spring
- Article: How to Raise Your Travel Trailer Height
- Search Results: shackle links
- Video: Review of MORryde Trailer Leaf Spring Suspension - Triple Axle Rubber Equalizers - MR59ZR
- Search Results: suspension kits
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Q&A: Trailer Suspension Equalizer Tilted Up At one End
- Video: TruRyde Curved Equalizer Installation
- Search Results: leaf spring replacement system
- Q&A: Recommended Replacement Axle For 1970 Phillips/Dexter 6000lb Axle
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Third Axle Replacement Equalizer - 013-146-03
- Article: Double-Eye Trailer Suspension System Review
- Video: Redline Trailer Suspension 166081 Review
on Trailer Leaf Springs
