Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 23-1/2" Long Equalizers

Video Transcript for Review of Dexter Trailer Leaf Spring Suspension - Standard Equalizer - HAP-205-03

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Dexter Tandem Axil Trailer Equalizer Kit for the two inch wide slipper springs. Now this kit here will include these two 23 and a half inch long equalizers and the necessary bolts and hangers for suspending your e-springs from your trailer frame. This kit is designed to be used with the part number HAP-105-00 for a complete Tandem axle kit. Did wanna pop up an insert show you the picture of that kit we're talking about. That kit will contain the front and rear hangers and the mounting hardware to give you a complete Tandem axle kit.

Now this is designed for use with Tandem 9,000 pound Dexter axles. This kit here will allow you to attach four slipper springs to your trailer frame. Now the slipper springs are not included. We do sell those separately. This will include everything shown on the table, we mentioned includes these two 23 and a half inch long straight equalizers.

And just to give you an idea, if we put a tape measure on them, your 23 and a half inch measurement. Now these equalizers will allow for 48 and a half inches between the axles. They do use the one inch diameter center hole for mounting to the hangar. And then over here they have the five eighths inch diameter side hole for attaching to the spring. Does also come with these tall, these center hangers here, they are a four and a half inch tall center hangar.

Has the one inch diameter bolt holes in them. Now when we say four and a half inches tall, when you measure them it's not the overall from bottom to top, it measures from the center of the bolt hole to the top of the hangar. So you can see if we go center at the top, four and a half inches tall. Does come with all the hardware. We'll start with these.

It comes with the three and one quarter inch long five sixteenth diameter spring keeper bolts with the lock nuts. Comes with the two four and a half inch long five eighths inch diameter spring high bolts with lock nuts. And in two of these five inch long one inch diameter equalizer bolts with the lock nuts. Now one note, this kit does not include components for mounting your axle to the springs. But that should do it for the review on the Dexter Tandem Axle Trailer Equalizer kit for two inch wide slipper springs.