Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty, weld-on, square, drop leg jack includes a sidewind crank and has a side-facing plunger pin and a 28-1/4" retracted height. Perfect for agricultural, construction, livestock or heavy-duty utility applications.
Features:
Specs:
If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity. But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity.
Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Note: Do not use landing gear to lift your trailer during tire changes or service work, because doing so will exceed the capacity of the landing gear.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Pro Series Square Jack. It does come with a drop leg and non spring return. The sturdy steal construction provides heavy duty durability. It's going to feature a weather resistant inner and outer tubes that feature a black paint finish. The drop leg again, it's included, has non spring return. That's really going to help increase overall extension for maximum adjustability.
You can see here that this right here is our plunger pan. That's going to be positioned to the side for easy access and it's going to feature a five-hole design on that drop leg and those holes are separated on center by three and three eight-seven inch. To pull it you just grab that handle. Nice, easy-grip design. Pull it out to the side, rotate it and that's going to be held in the position and then that's going to allow you to adjust it so there you can see four holes and then the fifth hole is actually right up here under this collar. Then when you're ready to engage in the hole, grab the handle, rotate it and then you allow that to engage inside the adjustment hole. This is a direct weld 00:01:00 design.
It does offer grease zerks here. You're going to have a zerk fitting here and right here. It's going to allow for easy maintenance. That way you can just hook up a grease gun and pop in the grease as needed to lubricate those internal components. It's going to come with the sidewind crank handle.
This end right here, this is where you grab on to it. It does rotate so that's very easy to use, very nice, smooth functioning. You can grab that and just rotate it. This can be positioned on either side of the jack. That's included and it's going to come with the necessary hardware to get that attached and it's going to come with the weld-on bracket that can be welded to the application.
That's going to secure the handle in this position here when the handle is not being used. Also at the base it's going to feature the integrated footplate. Footplate is really going to help spread out the applied weight and it's going to help prevent sinking on softer surfaces. That footplate has a nice large design to it. That's going to give us a measurement of eight inches by eight and a half inches. Few other measurements that I want to mention for you real quick. The overall height that we have with the jack in the fully retracted position, measuring from the base to this portion here. It's going to be about 28 and one quarter inches. This is going to offer a lift or travel of 12 and a half inches so you extend this out you rotate the handle, extend the jack, it's going to raise it up an additional 12 and a half inches. Then that drop leg is going to offer an additional 1three and a half inches of travel which gives it an overall height of 54 and one quarter inches when fully extended. That's going to give it a full travel or a lift measurement of around 26 inches. This has a lift capacity of ten thousand pounds, static capacity of 12 thousand pounds. The outer tube, right here, that's going to measure four inches by four inches. That inner tube is going to measure three and a half inches by three and a half inches. That's going to do it for today's look at the Pro Series Square Jack with the drop leg with non spring return.
Average Customer Rating: 4.8 out of 5 stars (502 Customer Reviews)
Heavy-duty, weld-on, square, drop leg jack includes a sidewind crank and has a side-facing plunger pin and a 28-1/4" retracted height. Perfect for agricultural, construction, livestock or heavy-duty utility applications.All products were exactly as ordered. I do want to say that your customer service is top notch! I was missing a piece for the jack stand ordered and after emailing I promptly received an email back and just a few days later received correspondence that the missing item was being sent out. I also received an email asking if the missing parts were delivered. I honestly can’t believe the level of service you all deliver. I will for sure use you all in the future and recommend your company to friends and family. Thanks.
Great product and great shipping!
WORKS GREAT!
I had a great experience ordering from etrailer and was able speak on the phone with the sales rep to get recommendations. The Pro Series is well constructed. Completely satisfied.
This is a great product with a affordable price. It shipped and delivered in a timely manner as expected. I maintain the fleet of trailer our company owns and operates and I'm a long time customer of etrailer because I can always find what I need. We purchased the drop leg pro jack to replace a much lighter top wind jack that had been damaged and the pro jack retro fitted perfectly. Great products, prices, service and helpful information for everything. Thank You etrailer.com
Hey it was very easy to determine the size Jack stand I needed and I can say it's still working...LOL! I will continue order Jack stand & trailer lights from Etrailer...PS I love the picture rotation it helps a lot... thanks so much!
FANTASTIC PRODUCT, THE JACK IS A LITTLE OVER KILL FOR OUR APPLICATION, THEY STAND UP TO THE ABUSE.
ETRAILER always has the parts I need to keep our commercial trailers on the road. Delivery is on time, and they are always able to answer any questions I have. I know that whatever I need , I'll be able to find it at ETRAILER
The jacks we bought work very well to hold up the front end of our livestock trailer when not being used.
It works great. It was far more less expensive than anything you can buy from a retailer even Harbor Freight or Northern Tool. Don't know how I did without it before buying it.
great jack just wise it was spring loaded but otherwise am very happy with it
These jacks are very heavy. My plan is to fasten 2 of them to my boat lift. Put a wheel on them and then roll the lift out into the water
Product just what I needed . Excellant product with great delivery time.
18 jacks ordered and delivered in days. Thanks etrailer!
It took several tries because it kept being back ordered but when it came it seems to be a nice Jack thank you
good quality,works great, exactly what we were shopping for and offered a a great price compared to other name brand ones.
Great product! Well constructed and built.... Delivered in great shape :)
Good service once I got someone on the phone to place the order.
good product
A high quality product
Fast shipping. Correct part at a great price
product was delivered on time and in good working condition.
very good
Completely satisfied. Fast shipping and product as discribed.
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gary T.
7/21/2018
Removed old jack installed new jack very happy with product.