Summer Starts Here - Save up to 70%
Hub-and-rotor assembly works with 7,000-lb Dexter disc brakes. E-coat finish protects against corrosion. Vented design prevents heat-related damage. Inner bearing (25580), outer bearing (14125A), races, grease seal, and grease cap included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Dexter 12-1/4" E-coat Hub-and-Rotor Assembly with the 8 on 6-1/2" bolt pattern for 7,000 pound Dexter axles. Now, this whole Hub-and-Rotor Assembly will work with 7,000 pound Dexter axles with disc brakes. They do use a machine process to help minimize runout and warping. It helps keep contaminants so it can't get in between your rotor and your hub. The hub and the rotor itself has a vented design to dissipate heat. This will regulate temperature and prevents overheating.
It is a cast iron construction, provides strength and durability. It has an E-coat finish on it to protect against corrosion and wear.This part will include everything laid out here on the table: the hub and rotor itself, the inner, the outer bearing, the bearing races -- which are already pre-installed into the hub -- the double loop grease seal, the grease cap, the eight 1/2" by 20 lug nuts for attaching your wheel to this hub, and all these parts are made in the U.S.A.Again, a few specs on this. It's designed to fit a axle of 7,000 pound Dexter axle with disc brakes. The wheel size that'll work on this is 16", 16-1/2", and 17". The bolt pattern we mentioned is an 8 on 6-1/2" bolt pattern.
The wheel bolt diameter, which uses the wheel lug nuts of 1/2" by 20. The rotor diameter itself is 12-1/4". Now, the bearings that are used, the inner bearing, which is part number 25580, has a 1.75" inner diameter. The outer bearing is part number 14125A, has a 1.25" inner diameter. The races, which I mentioned, are all pre-installed in here.
The grease seal, which is a double loop grease seal, it's part number GS-225ODL, has an inner diameter of 2.25" and an overall diameter of 3.376". Again, the grease cap and lug nuts are all included also.But that should do it for the review on the Dexter 12-1/4" E-coat Hub-and-Rotor Assembly with the 8 on 6-1/2" bolt pattern for 7,000 pound Dexter axles.
Average Customer Rating: 4.0 out of 5 stars (1 Customer Reviews)
Hub-and-rotor assembly works with 7,000-lb Dexter disc brakes. E-coat finish protects against corrosion. Vented design prevents heat-related damage. Inner bearing (25580), outer bearing (14125A), races, grease seal, and grease cap included.The product itself is of good quality, however in shipping the bearings and seal were all damaged with the rotor having the weight it does I don’t know how to keep them from getting damaged in shipping other than box them or wrap them very well. It was not a big deal for me because I use a specific brand of bearings and seals but it may have delayed someone expecting to use them.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.