Is There a Kodiak 13 Hub and Rotor - 8 on 6-1/2 - 1/2 Bolts - 7,000 lbs Thats Threaded

Question

Question:

Conner L. replied to my previous question but I think he misunderstood. I do not want the grease version, I want the threadedinch version for use with Item # KPCAP The KRH1378D is for grease applications. I already use the similar Kodiak rotor for oil bath applications that is threaded for Item # KPCAP. I am trying to replace that rotor that uses the KPCAP Do you carry this rotor with the hub threaded for use with Item # KPCAP

asked by: Bill

0

Expert Reply:

The Kodiak 13" Hub and Rotor - 8 on 6-1/2 - 1/2" Bolts - 7,000 lbs part # KRH1378D that we offer are not threaded for an oil cap. That said, you can still use them with an oil cap that's pressed on, the Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles part # XLPROLUBE2440KIT which also has the seals you need.

The only hub/drum we have for this size axle that is threaded would be the Dexter 12-1/4" Hub-and-Rotor Assembly part # 008-416-91.

expert reply by: Conner L

0

Answer 1

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 8

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Is There a Kodiak 13 Hub and Rotor - 8 on 6-1/2 - 1/2 Bolts - 7,000 lbs Thats Threaded

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching