Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (26 Customer Reviews)
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.I AM Very Impressed With The Quick Delivery!! Packing Around Everything So No Bent or missing parts!
Will Order From You Again!
This is an exact replacement for the hub that had been ruined on my 23' Donzi boat trailer. It was shipped extremely quickly and I installed it this afternoon - ready to roll again!
Hubs worked great...now my trailer has the same bolt pattern as my Jeep.
These are pictures of your product assembled on my trailer.You have an excellent product and service. Thank you all very much. You save time and money.
At the time I ordered these, I was new to re-doing breaks. I had never done anything like it before. I did my best research. However, I still ordered the wrong parts for my trailer. George and Tamera were extremely helpful in their research! They went out of their way to help me get what I needed. After watching the videos and getting greasy, the job was complete. I may have made mistakes along the way, and I really should have called first, but in the end, my trailer works great.
My trailer - 3 years later - still has no issues and has over 10,000 miles on it pulling my quads.
I have been a satisfied customer since 2015.
Joel
I was really disappointed that the Dexter Hub included wheel bearings made in China, they were poorly constructed and luckily I kept my "made in Mexico" wheel bearings and installed those instead!
Everything is great. I used thes parts for a year. Many time to the lake and back. Round trip over 500 miles. I really appreciate the quality parts supplied by E trailer
I always go to etrailer.com for all my trailer parts. Fast easy ordering and fast shipping help me get my customers back on the road quicker. The price is right and the parts are quality!
Brent
Ultra Marine Service
Knoxville TN
Product arrived in good condition. Installation was smooth and easy. The only problem that I had, mainly my fault, was installing the dust caps. The fit was extremely tight to the point I bent it up then it would not fit properly. One thing I would suggest to others is to install and tighten as you would normally, then wait a day or two and try to wiggle the rim. If it does pull the cotter pin and tighten again. IF you can not wait then do check them after the first usage.
product a Hub and bearings were as expected-New, the bearing cap was thin and crushed when trying to get it to seat but it did finally work the unexpected thing was the fast service it had to be shipped the same day as I called in the order. That means downtime was less!! Thanks and I will be using you again!!
i bought this hub to adapt a 30's era Ford spoked wheel to my motocycle sidecar. it fits the wheel perfectly. it will take a bit a creativity to match it to my axle, but i knew that would be needed when i ordered it. it's a good solid piece.
No grease zerk. I guess you are expected to use ez-lube axles. No response fro eTrailer about this issue.
Was very pleased with the trailer hub .We couldn't find one anywhere else! Would use etrailer.com next time we need anything!
Ordered my part for my pontoon boat that was next go impossible to find anywhere on Monday morning and ups delivered it on wensday afternoon! I haven't put the part on yet due to weather but I'm happy so far!!!
Exact fit
Robert
3/31/2023
great
Well, I can't say much about the product itself - seems to be just fine. I can, however, comment on the superb service - our shipment was "upgraded" without even asking. We ordered the part on a Saturday and had it on Wednesday. That's how you keep customer coming back!!
perfect. quick shipping and customer service tops!
Haven't installed it yet but the construction of the part looks to be very high quality! I am very happy with my order
The product that I ordered was what I needed and delivery was very great. Def got my business
GOOD QUALITY GOOD PRICE
Everything worked out well.
Service was great and the product was a quality product.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeff R.
1/16/2018
Perfect great product