Replacement Hub for Utility Trailer with Dexter 8-256 Hub

Question

Question:

I need to replace this hub but cant tell which one I need to order from your web site. It came off a dual axle 16foot utility trailer. The hub measures 7 3/8inch across. Distinguishing Marks stamped on hub: Dexter 8-256 3 028 AF-4 8-256 Please help!!

asked by: Bryan F

0

Expert Reply:

The Dexter "8-256" is a hub assembly that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in a few different bolt patterns therefore you would need to confirm your bolt pattern using the attached help article and then choosing from the list below.

5 on 4-1/2" - part # 84545BX
5 on 4-3/4" - part # 845475UC1
5 on 5" - part # 84550BX
5 on 5-1/2" - part # 84555UC1

expert reply by: Conner L

0

click to enlarge

Answer 1

Your Dexter Axle hub 8-256 should use an #L68149 inner bearing and an #L44649 outer bearing which means you have a #84 spindle and you'll use one of the following hubs: 5 on 4-1/2" - part #84545BX 5 on 4-3/4" - part…

view full answer...

Answer 2

The hub part number #8-258-5UC1-EZ that you referenced would be the correct hub for you as it would be an exact replacement to what you currently have. It comes with a set of matching bearings to fit your spindle. The spindle nut/washer kit you…

view full answer...

Answer 3

The correct replacement axle for a Quality 3500 Lb 95 HF 80 SC is the Dexter Trailer Axle Beam with E-Z Lube Spindles part #7359765. This option will be a direct replacement with no modifications needed. If you want to replace the brakes and…

view full answer...

Answer 4

The Trailer Hub Assembly for 3,500 lb Axles, #84550BX, was confirmed by Dexter to be the assembly which replaced part 8-208, but please note that it does have a 5 on 5 bolt pattern, and you mentioned yours was a 5 on 4.5. To determine which bolt…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

When you use the Bearing Buddy Bearing Protectors like #BB2441, so you do not need to take apart the wheel hub and repack the bearings. The Bearing Buddy Protectors have a spring loaded seal that keeps the moisture and debris out of the bearings.…

view full answer...

Answer 7

When greasing or re-packing the bearings with grease, you need to fill every space of the bearing with grease. This can be done either by hand, by using a bearing packer #L70025, or if you plan on servicing multiple trailers, or just want to cut down…

view full answer...

Answer 8

There is no specific torque rating for the castle nut that holds your hub in place. We recommend tightening the castle nut down until it stops, and then backing it off to the next notch wheel the tang washer will fit into the castle nut. Over…

view full answer...

Answer 9

The Taskmaster tires are huge sellers for us. Reason being they are priced great, they have proven to be reliable, and they have higher speed ratings than most trailer tires as they are rated for up to 81 mph and most trailer tires are only rated for…

view full answer...

Answer 10

A 3500 lb axle typically has a 1 inch diameter threaded portion. The #5-23 would be the correct D washer for your application.

view full answer...

Answer 11

The Dexter Trailer Hub Assembly you referenced, part #AKIHUB-440-2-1K is known as an idler hub. An idler is a hub that is no provisions for trailer brakes. It has no brake drum. Part #8-276-5 is an example of a hub/ drum that has a brake drum that…

view full answer...

Answer 12

What you could do is install the hubs that fit your spindle part #DX22XR and then use a slip on style disc brake kit that matches the bolt pattern of these hubs 5 on 4-1/2 inches like the #K2R35D which will bolt up to the same brake mounting flange…

view full answer...

Replacement Hub for Utility Trailer with Dexter 8-256 Hub

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching