Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # 36336
Retail:$366.13
Our Price: $227.19
You Save: $138.94
Confirmed to Fit
1994 Toyota Camry
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (332)
- Q & A (0)
- Photos
1994 Toyota Camry - Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- 1-1/4 Inch Hitch
- Class II
- 3500 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 300 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant Toyota Camry trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 300 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
36336 Draw-Tite Class 2 Trailer Hitch Receiver
90174 Hidden Hitch Class 2 Trailer Hitch Receiver
Installation Details
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36336
Average Customer Rating: 4.8 out of 5 stars (332 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: Jeffrey03/26/2022
2005 Lexus ES 330
Install was easy - I had a shop do it, but I could have done it myself. Looks great, hardly visible. I bought the 1-up bike rack with the 1.25 hitch option, did not need an extension, everything just fit. No problems with clearance. Thanks!
by: F.R.05/15/2024
2004 ToyotaCamry
This is my "One-Year Later" review.
Have no complaints on this hitch. I installed it on a 2004 Camry to pull a U-Haul across the US from the west coast to the east coast. Install was very easy, did it in an hour or so.
The only reason I'm giving it a 4 star is because under the exhaust is pretty low and I'm constantly scraping it and that sound is awful. Not the parts fault itsself I mean I am using it on an already low car. I'll probably remove it when I'm done renting u-hauls, but overall very sturdy, easy to mount.
Have " />
by: EJL04/18/2024
Hitch installed as expected.
Some delay for missing fastener parts due to (IMHO) mishandling during initial shipping. Cardboard box torn in several places. Missing fasteners were quickly replaced by etrailer. Life is good!
Thanks.
by: Wesley 05/23/2024
1997 ToyotaCamry
Well-made, perfect fit, easy installati on.
by: Joel G11/11/2017
2005 ToyotaCamry
I purchased this hitch receiver, along with a Curt bike rack. The instructional video was spot-on, matching my 2005 Toyota Camry XLE. Installation took less than an hour and I didn't have to put the rear end up on jacks to do it. But I used the bike rack for something a bit different... it held a medical transport chair for a 4500 mile trip. Great products, shipping and service. Perfect. Thanks, etrailer!
Joel G.
11/11/2018
Still great! The only issue, as someone else pointed out, is Ive experienced some instances of the hitch receiver andor bike rack bottoming out when entering exiting driveways. Ive gotten used to approaching some driveways at an angle to avoid the problem. Id purchase the same products again, without hesitation.
by: Mary03/02/2023
I am so thankful for etrailer! I had tried to order this receiver two different times from other retailers and they sent me the wrong one both times. Then I came across etrailer and I am so thankful I did! They sent me the correct receiver and it was delivered exactly when it said it would be! The receiver is on my car now and it fit like a glove!
by: Mark S01/12/2024
2003 ToyotaCamry
I just received the new hitch for my 2003 Toyota Camry and it arrived very quickly, undamaged and is good quality. All the hardware is included and the detailed installation instructions look very easy and complete. I still need to install it but I am confident it will take less than 30 minutes and fit perfectly.
by: GS05/19/2024
2003 ToyotaCamry
Incredibly frustrating experience. etrailer needs to list tube-insert clearances on all of their hitches (how far a bike rack can be inserted before it bottoms out).
DO NOT USE THIS WITH MODERN BIKE RACKS - If it has an expansion anti-theft feature you WILL NOT be able to fit your rack into this hitch - it will be short by at least 1".
I called customer service - they were unwilling to offer a discount for the second hitch that needed to be ordered (Curt, which can clear 4" instead of DrawTite's 3" - fingers crossed), I can't return the first one because this flaw wasn't revealed until it had already been installed on my vehicle (at $200 expense to me) so it's not new in box anymore.
I had to buy the other one that fits my make/model - so all in, I paid $800 for what should have cost $400, and made clear to the consumer in the first place.
You have been warned.
by: Linda09/17/2016
2006 ToyotaCamry
My Draw-Tite hitch for a 2006 Toyota Camry was on back order for several months but I received it and it has been installed. I'm very happy with the customer service department and the hitch is just what I needed.
Linda B.
9/17/2017
Great! No problems
by: John05/13/2024
2005 ToyotaCamry
Nice people and easy to install but hitch will not work on a sedan with a bike rack attached as there is not enough clearance (back of bike rack will scrape ground on minor dips) and adapter (riser) will not work on Camry because of car frame. Not functional and there are returns accepted once installed. Hitches for sedans probably need built in riser with proper bumper clearance.
by: Dom L.07/07/2017
Nice product but steel is a little mild. Mine came a little "sprung" out of alignment and didn't line up with my Lexus's hole pattern. You could see a slight bend right out of the box on the left side plate tailing inward. I was hoping it was supposed to be like that but nope it was way off. I took a block of wood and wacked it a couple of times with a 20lb sledge hammer before installing. I got lucky and nailed it on the first try. Steel is soft(thankfully)! Sad part is I believe it was packed this way as the package was clean and untorn when I received it. So much for quality control. I was worried I would have to go through the hassle of an exchange.
Laura E.
7/10/2017
Dom, I am sorry to hear about the issue with the hitch installation.The manufacturers of the hitches design the frame attachment arms with mild steel so that they can flex. They do this to prevent stress fractures from occurring over time due to changes in temperature or impact from potholes, etc. Because they are made to flex, they can sometimes get knocked out of alignment just like you mentioned.
by: Noah06/23/2011
Ford Edge
Received the hitch very fast! Installation was pretty simple even for one person to complete with no jacks/ramps/stands just the car on the ground. Only issue I had was I didn't take off the exhaust hanger first and once the drivers side of the hitch was loosely attached it was tricky to try and maneuver the passenger side of the hitch around the exhaust hanger and pipe. Also, on my car the exhaust hanger has a tab that is folded in towards the hitch bracket and it does not wrap over the edge of the hitch bracket like it did on the towing bracket. In other words the exhaust hanger has a tab that is folded over and prevents it from laying flat against the exhaust bracket. However, when I torqued the bolts down this tab folded out and flat so it did not prevent a problem in the end.
The picture is with my Yakima HighLite 3 bike rack attached. One interesting thing I found out about this hitch when I bought my bike rack is that the input is actually very shallow. When my rack is installed, it does not go far enough into the hitch fitting so that I can put the safety pin into the side as a secondary link for the hitch and rack. In other words, if the main wedge that secures the rack in the hitch fails, there is nothing to keep the rack from just sliding or pulling out.
This is a concern as all of the other models of Yakima racks attach to the hitch solely by a bolt that goes through the hole in the side of the hitch. So any other rack will not work with this hitch at all unless you drill a secondary hole in the side of the hitch inlet to accommodate the locking bolt.
Perhaps on the other models of Yakima racks the hole is closer to the end of the rack that is inserted into the hitch so that the shallow hitch is not an issue? I am not sure of that. At least on the HighLite 3 model the holes in the hitch and rack to not line up.
I had to drill a new hole about 1/2" back from the original hole so this pin will fit and secure my rack in case the main lock fails.
Maybe this is only an issue with my bike rack and not the hitch being to shallow, but I am merely just trying to be informative.
All in all, I am COMPLETELY SATISFIED with this hitch and etrailer.com!!!
Maybe this is only an issue with my bike rack and not the hitch being to shallow, but I am merely just trying to be informative.
All in all, I am COMPLETELY SATISFIED with this hitch and etrailer.com!!!" />
by: Michael S.Vrooman05/17/2012
2004 ToyotaCamry
I am by far no mechanic but your video and the design of the Trailer Hitch receiver made it easy for me to mount it on our 2004 Toyota Camry. Thank you very much.
Just a suggestion, perhaps you should include a tap which would have made it much quicker to clean out the rusted hole where I needed to mount this. It took me more time to clean them out and would have been better to have the tap.
Sincerely, Michael
by: David 01/27/2024
2003 Lexus ES 300
Thanks for the quick delivery. The hitch looks great!
by: Jackson R08/02/2023
1995 ToyotaCamry
I absolutely loved the service here. It was so quick, packaging was perfect; the hutch went on pretty seamlessly. A total newbie when it comes to mechanics and very easy to install. Did it all said and done in about 30-45 mins. This hitch has the capacity to go on far fast then this. I packed the passenger side up high which made it more convenient, however, it is easily installed from the ground too. Thank you Etrailers so much!
by: Greg08/17/2021
Package was delivered and I had the trailer hitch installed before the delivery company sent me a notification email that it was delivered. Super easy install. Have not hooked up a trailer yet but sure it’ll work great. Fast shipping too—great experience.
by: James06/21/2023
Hitch was exactly what I needed to haul my bikes around. I did have to do some very minor modifications for an exact fit but it could be that I have a wagon versus the standard car. Nothing extreme and installation was very simple.
This isn't my first time purchasing from etrailer. Each time the service and shipping and quality has been great.
Thank you.
by: Mark07/08/2020
Install was quick and easy. A little confusing at first because Camry and Avalon are on the same instruction sheet. It all worked out well enough, though. Hitch is rock solid and totes my high-end mountain bikes via my bike rack quite well.
by: Larry05/19/2022
2006 ToyotaCamry
Very fast shipping. Just what I wanted. My mechanic said the bolts supplied with the hitch were too short but other than that all went well with the installation.
Jenny N.
5/20/2022
The hardware that comes with the hitch are M10 x 1.25 x 30mm CL8.8 bolts. I recommend cleaning out the weld nuts prior to installation. Often it seems the hardware is not a fit when all that is needed is to clearn out the weld nuts. We do have a good FAQ below to help.
Helpful Links
Larry
5/20/2023
One year later I am very happy with the hitch. Its been a great purchase.
by: Christopher07/18/2023
This really didn't work for me at all for my 1997 Camry. This is a poor design with the bar under the muffler. It dragged on curbs in driveways, so I had rear shocks and struts replaced but it was still too low. I went to Uhaul to pay them to remove it and asked them to dispose of it. I bought an alternative and the whole thing cost me more than I had anticipated but at least I have a working solution now.
by: Dawn07/11/2021
Just got a friend to install the hitch today. He said it was very easy and he had no problems at all. Ordering and delivery were great! Hitch came fast.
by: Robert 01/26/2024
Item was perfect fit. Excellent workmanship and finish. Bolted directly onto my vehicle with zero problem in less than 10 minutes. (UHaul folks were very impressed - they said it was the best one they had ever seen,)
by: George01/26/2024
I think you you should solicit my opinion in a day or two... Maybe 5. Product arrived? I was unaware.
Katrina D.
1/26/2024
Yeah, whenever you get the chance, we will love to hear your updated feedback of the product.
by: Carla L.08/01/2017
Lexus
Hi!!
Here are some photos of the installed hitch (36336)! I had a friend install it to my '05 Lexus. He said it was surprisingly the best installation ever..quote-"I can't believe how easy this was!" It went without a 'hitch' ..sorry couldn't resist!
From beginning to end, my experience with etrailer was fantastic!
Thanks again......I'll definitely pass my experience on to all!
by: William 09/02/2023
Operstes strongly & as I expected works well with any load or trailer. Thanks
25
333
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Using MaxxTow # MT70355 Adapter with Draw-Tite Class II Hitch # 36336 on 2003 Toyota CamryYour best bet would be to use a cargo carrier designed for a 1-1/4 inch hitch that has an angled shank to provide the additional ground clearance you're looking for. I'd recommend the Curt # C18110, which is compatible with the Class II hitch you're interested in and features an angled shank that would provide over a 3 inch rise for improved ground clearance. When we installed the Draw-Tite Class II hitch, part # 36336 on a 2006 Camry, we found that the hitch would be recessed under the...
view full answer...
- Availability Of Replacement Hardware for Draw-Tite Hitch, # 36336Yes, we do have the Replacement Hardware Kit for Trailer Hitches, # RHK, which is the part number you will need to order. You will just specify the hitch model number (36336) and the manufacturer (Draw-Tite) in the boxes provided on that part number and we will send you the hardware that is needed. I am sending a link to the # RHK part number.
view full answer... - Trailer Hitch, Ball Mount, Ball, and Wiring Recommendation for a 2006 Toyota Camry SedanThe Curt hitch, # 11225, for the 1992 Toyota Camry wagon will only fit 1992 to 1996 wagon models. The 2006 Toyota Camry sedan requires a complete different hitch. I have included a link to the available options for you. The most popular hitch for the 2006 is # 36336 from Draw-Tite. I have included a link to the installation instructions and a link to a video showing a typical installation. If you plan on doing some towing, the correct ball mount is # 36061 and you can use pin and clip...
view full answer... - Recommended Trailer Hitch For 2005 Toyota Camry To Use For Bike Rack OnlyThe trailer hitch I recommend for your 2005 Camry is the Draw-Tite Trailer Hitch, part # 36336. The price of this hitch will certainly not scare you. This is a Class ll hitch and it has a 1-1/4 inch receiver opening. I have attached a link to an installation video for this hitch on a 2005 Camry. The installation instructions state you need a 1/2-inch drill bit, but may not be necessary because as you can see in the video, drilling into the frame was not required.
view full answer... - Trailer Hitch Fit For 2006 Toyota CamryWhile your concerns about clearance are understandable, the Draw-Tite 24563 is not a fit for your 2006 Toyota Camry; the two hitches which fit your Camry are the Draw-Tite # 36336, which you mentioned, and the Curt # C12339. Both of these are going to be installed with a part that goes under the exhaust, which is the part that you are likely worried about scraping your driveway. I went to the warehouse to measure the Curt, and it was two inches from the bottom of the receiver to the bottom...
view full answer... - Trailer Hitch Recommendation for 2002 Lexus ES 300 for Bike RackFor carrying a bike rack with a trailer hitch a draw bar/ball mount would not be needed. So for your 2002 Lexus EX 300 the Draw Tite hitch part # 36336 would be all that you need aside from the bike rack. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three. Check out the review video...
view full answer... - Hitch Recommendation for a 1996 Toyota CamryI have a solution or you, but the Reese Hitch part number 37042 that you referenced is an multi-fit hitch designed to fit older model trucks so I cannot recommend it for you. Instead you would want the Draw Tite Hitch part # 36336 as it has been confirmed to fit both the sedan and coupe models of the vehicle. I attached an install video for the hitch as well.
view full answer... - Recommended Trailer Hitch and Hitch Mounted Bike Rack for a 2004 Toyota CamryQuite a few bikes! Send us some pictures once you have your complete setup. For your 2004 Toyota Camry, I recommend the 1-1/4 inch Draw-Tite Class II hitch receiver # 36336 because its a Class II rated hitch and rated up to 300lbs maximum tongue weight. I did some research and your 2004 Camry has a tongue weight maximum of 200 pounds, but I still recommend checking your owners manual on your Camry to verify the tongue weight and gross trailer weight and be sure to not exceed the ratings...
view full answer... - Hitch Recommendation for a 2006 Toyota CamryFor your 2006 Toyota Camry there are only 1-1/4 inch hitches available like the Draw Tite part # 36336. The 2 inch hitch size is reserved for larger vehicles like trucks and SUVs. Since hitch adapter cut the capacity of the hitch they are used on in half that would not be an ideal solution. Instead I would recommend you go with accessories designed for the 1-1/4 inch hitch. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 Bike Rack #...
view full answer... - How to Carry a Mobility Scooter with a 1999 Toyota CamryI do have an option for you but the highest rated trailer hitch receiver they make for a 1999 Toyota Camry is a Class II, to my knowledge. I would be very skeptical that a Class III or IV exists due to the size of the vehicle. For a Class II trailer hitch with a 1-1/4" receiver tube opening I recommend the Draw-Tite Trailer Hitch Receiver part # 36336. This trailer hitch has a 300 lb tongue weight (TW) rating however, the vehicle is likely lower and if that is the case then this will need...
view full answer... - Compatibility of a Trunk Mounted Bike Rack part # TH910XT with 2001 Toyota Camry with SpoilerAlthough the Thule Passage 2 Bike Carrier - Trunk Mount part # TH910XT, is a fit for a 2001 Toyota Camry, Thule does not recommend using trunk mount racks on vehicles with spoilers. According to Thule, the racks are not test fitted on spoiler equipped vehicles, and a fit cannot be guaranteed. Your safest bet would be to go with a hitch and a hitch mounted bike rack. We would recommend the Draw-Tite Trailer Hitch for the Toyota Camry, 2001 part # 36336, and a Thule Helium Aero 2 Bike Carrier...
view full answer... - Is Drilling Required to Install a Draw-Tite Hitch on a 2004 Lexus ES330The Draw-Tite # 36336 is a custom fit hitch that is designed to fit on the frame of your vehicle, but there are no holes already drilled in the frame on the 2004 Lexus ES 300 to install a hitch on, so you will have to drill your own regardless of what trailer hitch you installed. We have put together a quick installation video of this hitch for you to have a look at and use as a guide though, which I do recommend checking out.
view full answer... - What Size Bolts Does the Draw-Tite Hitch for a 1998 Toyota Camry UseThe bolts which secure the Draw-Tite Trailer Hitch Receive part # 36336 to the frame on a 1998 Toyota Camry are as follows: Hex Bolt M10 x 1.25 x 30mm CL8.8 If you need these, we do offer a complete kit that comes with these and everything else you need to install the hitch, the Replacement Hitch Hardware Kit part # RHK.
view full answer... - Towing Capacity and Trailer Hitch for 2005 Toyota CamryI looked up the towing capacity of your 2005 Toyota Camry and found it to be 2,000 lbs. So as long as your trailer would weigh less than that when loaded you'd be good with the Draw Tite hitch part # 36336 installed. Then for trailer wiring you'd also need the part # 118308 which is easiest to install and most reliable. I attached install videos for both of these for you to check out as well.
view full answer... - Install Hardware Recommendation for a Draw Tite Hitch on a 2000 Toyota CamryTo install the Draw Tite Hitch part # 36336 on your 2000 Toyota Camry you would need to use the included install hardware that is M10 x 1.25 x 30 mm. Or if you wanted us to send you all new install hardware for this hitch you would need part # RHK. On the product page you would enter Draw Tite as the manufacturer and 36336 as the part number and we'll ship you out all the needed hardware to install this hitch.
view full answer... - Does Installing a Hitch on a 1999 Toyota Camry Involved Cutting Fascia or BumperI have reviewed the installation instructions for the Draw-Tite Class II hitch, part number 36336. There is no indication of cutting the fascia or bumper for the 1999 Toyota Camry. The receiver opening sits flush with the rear fascia or bumper cover. I have added a link to the instructions below that include a drawing of how the hitch is positioned on the car and a step-by-step instruction list. I also added a video of it being installed on a 2005 Toyota Camry.
view full answer... - Hitch Bolts Seem Too Large for the Weld Nuts in the Frame on a 2000 Toyota CamryThe bolts provided with the Draw-Tite Trailer Hitch, # 36336, are the correct bolts for your 2000 Toyota Camry, see instructions link. You are most likely running into corrosion from road grime and salt since your vehicle has some age. We have help videos, see links, that detail how to go about cleaning the vehicles weld nuts for installing the hitch. You may find that a weld nut will break off when trying to install the hitch, despite your best efforts, if this happens we have a video...
view full answer... - What Hitch and Trailer Wiring do You Recommend for My 2000 Lexus ES300?I have a suspension answer for you. The only way to determine what SuperSprings coil springs you need as a replacement is to measure the gap between the middle of your coils. The spacing of that gap determines what springs you need. It is important to make this measurement on level ground to make sure the measurement is accurate. For example, if you find that the gap is .5 inches, you need the Coil SumoSprings # CSS-1069. Feel free to reply to this answer with your measurements, and I will...
view full answer... - Trailer Hitch and Wiring for a 1998 Toyota CamryWe do have some trailer hitches for your 1998 Toyota Camry. If you want to use the hitch for accessories like a bike rack or cargo carrier then I recommend Draw-Tite hitch # 36336. If you need to do some light towing the correct ball mount is # 36061. For a 1-7/8 inch ball use # 19256. For a 2 inch ball use # 19258. And for trailer wiring use # C55358. I have linked some videos showing installations of a hitch and written instructions for the wiring for you.
view full answer... - How to Choose the Right Ball Mount to Tow a Trailer Level with a 2003 Toyota CamryTo choose a ball mount with the correct rise and drop, you'll first need to take two measurements: your hitch height and trailer coupler height. The difference between them will be your rise or drop. To take the first measurement make sure the vehicle is on level ground and measure from the ground to the top of the receiver opening. On hitch # 36336 for your 2003 Toyota Camry that measurement is approximately 12 inches. To take the second measurement make sure the trailer is on level...
view full answer... - What Parts do I need for Towing a Trailer with a 1999 Toyota SolaraDraw-Tite part # 36336 does not include the manufacturer recommended ballmount, part # 36061. The only other pieces you would need are the trailer ball, the pin and clip or lock for securing the ball mount into the receiver and the wiring harness for your 1999 Solara. You would need to hardwire your vehicle with a wiring harness using part # 119178KIT. The ball mount recommended for your hitch uses a 3/4 inch ball shank diameter hole, so you will need to select a ball with that size...
view full answer... - Installation Difficulty of Draw-Tite Trailer Hitch # 36336 on a 1992 to 1996 Toyota CamryFor the Draw-Tite Trailer Hitch, # 36336, for the 1992 to 1996 Toyota Camry, 2 door and 4 door, we rate the difficulty of installation as a 5 out of 10. We base the scale on the estimated installation time. A 5 out of 10 indicates that it should take a novice installer with the correct tools and an assistant about 50 minutes to install the hitch. I have included a link to the installation instructions for this trailer hitch which lists the tools needed and the steps for installation. You...
view full answer... - Hitch Cargo Carrier and Bike Rack Recommendation for 2001 Toyota CamrySo first you'll need a hitch installed on your 2001 Toyota Camry. For that the Draw Tite part # 36336 is the best option. Then for a cargo carrier you'd want the Reese part # 63155 which fits the hitch and has a platform that measures 20 by 47 inch.
view full answer... - How to Determine Trailer Tongue Weight and is it Ever Acceptable to Exceed Tongue Weight LimitI attached a help article that details how to determine a trailer's tongue weight. There are several methods listed one of which is to get a tongue weight scale like part # e99044. You would not ever want to exceed the 300 lb tongue weight limit that the trailer hitch part # 36336 has under any circumstances.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Shane T
Video Edited:
Zack K
Video Edited:
Andrew L
Video Edited:
Sue W
Video by:
Andrew K
Video by:
Joshua S
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeffrey
4/3/2023
Works great! Really love how solid it is, I have bottomed out only a few times totally my fault - and theres been no sign of any damage. I should have bought this years ago! Thanks!