To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded Subaru Outback Wagon trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Drilling required for installation , Exhaust must be temporarily lowered for installation , Minor heat shield modification may be required
California residents: click here
Complete Towing Package for 2013 Subaru Outback Wagon
2013 Subaru Outback Wagon Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Outback Wagon Trailer Hitch Accessories
Average Customer Rating: 4.8 out of 5 stars (976 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
I have had this trailer hitch for a year now and am very happy with its quality. The paint has held up through the winter months and the functionality of the hitch is excellent. We had a local auto garage install the hitch and are very happy with it.
Easy to install and sturdy. It would be five star if the 2 inch receiver wasn't so far under the bumper. It's difficult to reach the hole where the pin holds the hitch in place.
It took me 3 hours by myself on the ground to install. A rather messy job, but in the end, everything went together perfectly. I especially like how sits back under the car so as not to knock your shins when walking past.
I finished the hitch install on my 2014 Subaru Outback today. It went without a "hitch" so to speak. I did the job alone (age 69) and managed it well because of some hints from previous writers.
First, I drilled access holes from inside the trunk area as suggested. Remove the black adhesive dots over each hole and drill them out to 1 1/8" using a step drill (see photos 1.jpg, 2.jpg, 3.jpg). I didn't have a vacuum cleaner handy so I used a small magnet to collect all the metal cuttings. (see photo 4.jpg)
I then raised the rear of the car with ramps to get easier access underneath.
I took off the muffler which was not too difficult once the rubber shock-absorbers were liberally doused with WD-40. Getting it back on later was another story. That thing is heavy and it took quite a few "bench-presses" to get it up and slid onto the outboard rubber shock-absorber. After that, the inner one and the final bolt-down was a lot easier.
I also removed and drilled out the heat shield to clear the hitch bolt. The step-drill was perfect for this as well.
I removed the small rubber plugs from the four hitch holes under the car. The holes could then be clearly seen from above so guiding the bolts and plates into the holes using the included guide-wires turned out to be extremely easy.
I used my 3 ton hydraulic jack to suspend and position the hitch. I clamped it to the jack pad using two small c-clamps. Once in position an raised up, I could easily finger-tighten the rear nuts (rear of the hitch/front of the car). Then I took off the c-clamps in order to push the front of the hitch up into place with the jack.
Tightening everything down to 50 ft/lbs. finished the job.
I also found some plastic snap-in covers that perfectly fit the drilled holes in the trunk. I used these to seal the holes from dirt and to give it a finished appearance. (see photo 5.jpg).
Next was the wiring harness. That turned out to be a bit tricky. I searched the wheel well housing on the drivers side but couldn't feel any wires. Then I found a YouTube video from a 2011 Outback that made it clear that the carpeting behind the rear seats had to be removed as well as the long foam strip adjacent to it. It is held down with three snaps...one in the front (fixed) and two loose plugs in the back. Once this was removed I was able to find and pull out the connector. The rest was easy. Plug in the connector, thread the wire back a bit, hide the black box under the wheel well housing and continue the wire around the outside edge of the trunk and into the spare-tire area.
Everything went back together nicely. I brought the hitch cable up into the foam tray where it would be easier to get when needed. I plan to run it out the tailgate and I don't at all think it will be damaged by the rubber weatherseal.
Jim H.
7/24/2014
Joe, I found the gray snap-in covers at my local hardware store in the nuts and bolts section. There are cabinets with pull-out drawers and I found them there. The ones I got said 1 but they fit the slightly larger holes just fine. I liked the idea that the holes were covered to keep stuff from falling in, especially liquid spills. If you cant find the plastic covers, just use some heavy-duty duct tape.
Jeff S.
4/21/2015
I followed Jim Hs instructions on my new 2015 Outback and it was really easy. The hitch looks great and was on in under an hour.
Jim H.
5/15/2015
I still absolutely love the hitch. I dont even realize its there except when I need it. I also like that it doesnt compromise the road height of my Subaru. It was easy to install and looks good too. Besides, I think it adds to the overall value of my car.It would have been perfect if it came with a rubber hitch cover-plug I bought one later. I would have liked one with eTrailer written on it!
Pretty good fit
Install time, start to finish: 2.5 hours
Purpose of hitch: Mount our existing bike rack. It’s never intended to tow anything
My skill level: Moderately competent. I’ll do the more strait forward work on the vehicles such as oil changes and brake work.
Tools used: 2.5 ton floor jack, 4 jack stands, various drills and wrenches, straps & WD-40
My first recommendation is to watch the video before starting the install. Lots of good tips and it’s nice to see the job done completely before attempting it yourself. Pay attention to the great tips about the WD-40 and strap with the exhaust system.
One small point of variance between the video and my installation was how large to drill the hole. The mechanic in the video sized it to the bolts. However, the blocks in my parts bag were slightly larger than the bolts – I had to drill to that size.
I don’t have a professional garage with a lift, so I put the vehicle up on jack stands.
Make sure you have a GREAT setting on the jack stands, not just “good enough”. There will be a lot of pushing and pulling on the vehicle you don’t want it falling off the stands with you underneath. I spent about 20 minutes getting it up on the stands and solid before I was happy.
Another tip is to use the floor jack as an extra hand when installing the hitch. I did this job alone so there was no one else there to help hold the hitch in place while I did the first bolts. I placed the receiver on the floor jack and used that to hold the weight while I adjusted and put in the first bolts.
Oh, and for the love of whatever deity you hold dear: wear safety goggles! Mandatory when drilling the frame above your head. The flying metal debris hurt when it was hitting my exposed arms, I can’t imagine that stuff hitting my eyes.
Make sure you have a torque wrench so you know those bolts are tight enough. I also used thread-locker since I never want this thing loosening up.
The installed hitch is very solid on the frame. It feels like a factory installed part. My wife is happy because it’s not very noticeable (her car).
Randall G.
7/8/2019
Its been a year. The hitch worked without issue. Several trips local and cross-country with the bike rack attached to the hitch. My Wife liked it because she retained access to the rear hatch without having to pull off the entire bike rack system if it was one of those strapped to the back window. Outside of that, shes never mentioned it, which is good: low visibility but nice utility.
Hesitant about installing this hitch by myself was on my mind so often between ordering it and receiving it, that I watched the EXCELLENT installation video 10 ten times to be sure I would do it correctly. I must say that anyone could do this without really any experience as long as they followed the video! WELL DONE, etrailer!
I also must say that alternative ideas by other customers led me to alter some of the methods for installation. Thanks and KUDOS to those who suggested drilling from the inside top of the cargo area---much easier and safer all around! The individuals who used the idea of raising the hitch into place via a car jack also need to be commended---being the only one around on the day of installing it I thought would be a challenge, but those ingenious people with their carjack idea and picture submissions made this job a breeze! Thank you!
All-in-all, not only was the price right for the hitch but the website, service, pictures, videos, AND customer submissions with their GREAT IDEAS made this event a pleasant and self-satisfying experience.
Thank you, George, for emailing me with updates, etc. And, thank you, etrailer, for the positive experience!
Scott H.
6/8/2018
So far, I’ve had this hitch a year and all is well as can be expected. When I find that I need something for trailering, hauling, etc., I turn to etrailer first to search for options. The full array of information available for any project is tremendous. Customer reviews and tips make this site a valuable tool for those who are interested in DIY endeavors.
etrailer is amazing. I ordered on a Saturday night late in West coast timezone and within a hour my order was processed and a shipping label was created. Daniel upgraded my order to 3-5 business days shipping at no additional cost and it arrived promptly. No damage to the box or the hitch. Followed all the great reviews here and took the trunk approach. Removed the muffler completely is the way to go. Widened the holes in the trunk and once the screws are snaked in, rest of the installation was easy. I used two jacks to lift the hitch in place and it made it was so much easier. With the help of my 13 year old son, we were able to finish the installation in under 2 hours.
Now it's time to shop for a good bike rack to hold our 4 bikes :-)
Suman C.
2/1/2015
Yes, I am still enjoying the hitch. No issues whatsoever.
I was a little intimidated by the prospect of installing this hitch, but it turned out very well in the end. Many thanks to the excellent videos at etrailer and the comments from my awesome fellow-customers. Looks great, works great, and total install time was only about 2 hours. I'm reasonably good with tools in general, but little to no auto mechanic experience.
Here are a few tips I found very helpful (many of them from the other reviews). Some would have helped me decide sooner to take the plunge:
1) The hitch actually installs on four bolt holes already provided in the frame by Subaru for installing a trailer hitch. The only reason the instructions have you drilling new holes under the car is to provide a way to fish the bolts through from the top, which takes us to our next point...
2) I highly recommend drilling down from the trunk area, rather than drilling up from under the car (thanks to the other reviews for this tip!). It's not only easier, but also means your holes aren't exposed to the weather. In fact, your new holes will be entirely covered by the snap-in panels in the trunk. Other reviewers have talked about removing the bumper -- in that case you don't have to drill any holes and I'm sure it's the best approach if you're comfortable doing that.
3) You must fully remove the rubber bumper hanger that is closest to the rear of the car. It wasn't clear to me initially, and I just took the bumper off the hanger, leaving the rubber hanger attached to the car. The hitch won't fit over the rubber hanger, and you'll be in no position to deal with it once you start trying to lift the hitch into place.
4) As others have said, removing the muffler entirely is probably the best way to go. I was a little concerned about doing that, but it was easy to get off and back on. If your car is very old, it might be tougher.
5) I had a second person assist me in lifting the hitch assembly into place, and cannot imagine trying to do that by myself. Definitely get a helper!
Brett H.
6/2/2013
Oops - when I said bumper hanger I meant muffler hanger. Whether you remove the muffler or just it down, youll need to fully remove the rubber hanger that is closest to the back of the car.
Bruce V.
9/30/2013
Wow, you did an excellent job of explaining everything you did. I agree, it sounds like drilling down instead of drilling up from the bottom of the carframe is the way to go. Once again thanks for the great job, Im ordering the hitch for our 2013 Outback today!
Perfect hitch. Couldn’t ask for a better product
Blake
6/15/2024
Works perfect. Awesome all around purchase
Online ordering was a cinch and shipping was lightning fast. I had my usual mechanic install it for me for $135 which was well worth the expense. It looks great and is barely noticeable. I am only going to use it for my bike rack and possibly a cargo carrier. Will definitely get the cargo carrier from etrailer. I am a highly satisfied customer.
Steve C.
5/18/2015
I couldnt be happier with this purchase. The hitch is heavy duty and still looks great.
I installed this hitch receiver on a Subaru Outback. My car had dual exhaust, so the prep to get the receiver installed took a little longer than I had expected when reading other reviews and watching videos. But, besides that, the installation went smoothly. The bolt guide wires and using a helper were definitely the 2 big things that I would recommend to someone else. The only reason for not rating this Excellent is due to the way the part was packaged and shipped (from Missouri to Connecticut). The box arrived damaged, as the mounting surfaces had broken thru in 2 places, allowing the coating to be chipped off in several areas. Overall I'm happy with the receiver and have already used a cargo tray with it. The packaging could be better in my opinion.
Brooke M.
4/28/2022
Thank you for reaching out to us. I have sent your information along to our customer service team.
Excellent fit on my 2014 Subaru Outback. I did not drill a hole underneath because the 2014 Outback has 4 observation holes in the trunk directly above the hits mounting holes covered with tape. All I need to do was enlarge them to insert the rectangular washer. Also instead of cutting the heat sheild I just drilled a hole where the bolt needs to pass..Easy installation. Took me less than 45 minutes.
Mark W.
12/22/2014
Are the observation holes located under the styrofoam side floor panels on either side of the trunk? If so they are secured with two plastic retaining clips - do they just pop off if you pull on them?
Installation went smooth. Just a described in the video. I used a Ratching Tie down attached to the hatchback latch loop on one end and then passed it through the center hole of the receiver and attached the other end to a hole in the frame along the midline. This made the installation easy as a one person install. The Tie down held the weight of the receiver while I aligned the bolts. The pictures attached are a recreation of what I did. Thanks.
Matt A.
10/2/2015
Awesome idea! Im going to do this also!!
This was my second etrailer.com hitch, I sold the first car and bought a 2015 Suburu Outback. I looked around at other options but decided to go with this one because the instructions and support are excellent. As an avid cyclist I have a nice, heavy duty bike rack I leave on the car and use virtually every week. Installation of this hitch was a little involved as I needed to lower the muffler and drill a hole in the frame on each side. The instructions and video made the work clear and successful. The quality of the hitch is excellent, the pictures are after one year of use. I did have a concern after receiving the shipment, but the quick tech support cleared my issue and you can see the results are awesome! If you enjoy a DIY project and like to save hundreds of dollars, you can't go wrong with etrailer.com .
The receiver went on with pretty minimal effort. Two hours total including time to drink beer and bs with my neighbor. I've used it extensively since then to tow multiple trailers. Worked great every time. Also got rear-ended by an idiot in a Ford van, having the hitch/ball installed saved my bumper. 10/10, would buy again.
One thing I did notice, not a problem with the receiver, but rather the height of an Outback: Install the ball upside down on the hitch, else it'll generally be too low for many trailers and you'll scrape the jack on uneven ground. Pic is from the side of the road right after being hit. Took it like a champ.
Hitch looks great. Will be installed soon. All hardware present. Packaging leaves something to be desired. Hitch was was placed loose in the box with nothing to restrain movement in transit. Hitch broke through box in several places.
The product in of itself was excellent and fit my 2015 Outback 3.6L with dual exhaust perfectly. I was a little apprehensive about doing the installation myself, however after reading through most of the reviews and hints and tips I figured I would give it a go.
I can't really give pros / cons on any of the installation options other than the option I choose and how it went.
The highlights:
1) I went through top and used a step drill to enlarge the existing holes. Worked great.
2) The 3.6L has dual exhaust and I just removed both mufflers to get them out of the way. To get the mufflers free from the rubber hangers some reviewers suggested applying oil to where the rubber connects to the body hanger and muffler. I used a squirt glass cleaner and the rubber hangers slid right off. You will need a long piece of wire to hold the exhaust pipe up off the ground after the mufflers are removed. Get that wire ready BEFORE you remove the mufflers.
3) Fortunately I have a hydraulic floor jack. As shown in the pictures I pulled the saddle off and with a couple of pieces of wood, a nut, washers and bolt made an adapter that slid into the hitch receiver tube. This allowed me to mate the hitch to the underside of the car by myself and I could maneuver the hitch until secured with the bolts. The best part is the jack could hold the hitch forever so I was under no time constraint.
Thanks etrailer for providing a forum for sharing installation techniques.
The hitch shipped and arrived promptly. I don't have a lift, but I put my Outback up on car ramps and instllalled the hitch that way. I had it installed in under 3 hours. I am very satified, and my wife is excited to be able to haul her bike!
Joe
5/20/2013
I have a 2011 Outback. Thanks for the picture with the bike rack. I plan on doing the same thing. Do you find the hitch sturdy enough for the rack 2 bikes and enough clearance between the bumper and the point on the rack? May I ask what type of rack you have? Were going from roof mount to hitch mount. Not getting any younger.Thank you,Joe
Patrick B.
5/20/2013
Helpful Links
After 1 year the hitch still looks great and does the job. I use it for the bike hitch which supports 4 bikes on an Outback 2012. I was able to install it myself by watching an install video saving me hundreds. I highly recommend etrailer. I had also purchased a Thule bike rack from them. I am very happy with all their products
I needed a hitch for my wife 2012 Subaru Outback for hauling sport bikes to track days and occasional utility hauling. A google search brought me to the etrailer site. The biggest advantage of the trailer site is the access of instructional videos and the additional resources from their previous customers experiences and advise; I found this to be most useful for installing the hitch. The quality of the products is good, the hitch had numerous chips in the paint which may be problematic for corrosion in the future, but for the price I have no complaint. The hitch appears to be the same one offered by Uhaul. The overall costs when a complete package is ordered are about the same. Regardless of the price I would and will purchase all my future trailer need from etrailer, and will recommend etrailer to future customers.
Regarding installation; (read all the the customer reviews) I would recommend drilling four holes from inside the trunk area instead of two holes from the bottom up. Additionally I recommend a $10.00 hole saw instead of the $50.00 conical shaped "step drill". The hole saw worked well, even without a pilot bit. It took about 5 minutes to drill the four holes.
If you have access to floor jack, use it, it made positioning the hitch into place a one person job.
Use liberal amounts of lubricant to remove the three rubber muffler mounts and remove them completely from the vehicle, it makes reinstallation easier.
Just installed this hitch this weekend on my 2012 Outback. Certainly the most-intrusive thing I've ever done to an automobile and apart from a bloody knuckle and sliced thumb, all went pretty smoothly.
I opted to go through the observation holes as recommended by other reviewers. Seemed making two existing holes larger would be better than creating two new ones. I opened up the two holes nearest the front of the hatch area which made threading the guide wire to the back holes a bit tricky. I solved it by running a fish wire of my own up through the rear hole then attaching the provided wires to that and pulling the whole shebang back through.
I installed this so I could use a hitch-mounted bike rack. I purchased the Softride Dura Parallelogram and had read on this site that it was necessary to also purchase the extender bar for that rack, so I did. Turns out this was an unnecessary purchase as it fit fine with the standard bar. So if you're planning on going that route, hold off on the extender bar until you find out if it's really needed.
Oh yeah, have help. Although I'm certain I could have done this alone with some cleverness, having a couple extra hands made it far easier.
No problems after receiving the correct hitch. The install with the correct hitch was simple, no drilling, 15 to 20 minutes to install. The hitch sits a little low on a 2020 Subaru Legacy (less ground clearance than the Subaru Outback) an can scrape on some driveway and entrance ramps. A better alternative is the hitch that is accessed through the bumper, but that is 3 times as expensive and 5 times the work involved. So, this hitch works fine.
I purchased this trailer so I could mount a Kuat Sherpa 2.0 bike rack to the back of my Subaru outback. I know there are cheaper hitch receivers out there, but I wanted something that would look sleek and tucked away. This did all those things and performs great. Very happy with my purchase
Great item, best price and service.
I ordered this trailer hitch a year ago just before COVID started up. Ended up not getting it installed until later that year due to lockdowns and many plans changing. Fast-forward a year later and we just so happen to be in the middle of a cross country move using the trailer hitch. Almost to our destination and the hitch is staying strong. Its very secure and sturdy. We're pulling a 4x8 Uhaul trailer for its maiden voyage.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe B.
7/23/2014
I did my install the same way your did. Thanks for the instructions. Helped me out A LOT.Where did find the plastic snap-in covers for the drilled holes? Would love to cover mine up as I left them open. Thanks,Joe