Does Draw Tite Hitch 75673 Fit Both a 2016 and 2017 Subaru Outback Premium Non-Sport Model

Question

Question:

Does the same 75673 Draw Tite fit both the 2016 and 2017 Outbacks?

asked by: Karl M

0

Expert Reply:

Yes, the Draw Tite trailer hitch part # 75673 that you referenced is a fit for all models of a 2016 and a 2017 Subaru Outback.

I attached an install video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

For your 2015 Subaru Outback Wagon 3.6R Limited with dual exhaust we do offer a 2-inch Class III hitch from Draw-Tite, part #75673, that fits as long as you do NOT have the Sport model. I also checked with my contact at Curt and their Class III…

view full answer...

Answer 2

I spoke with my contact at Draw-Tite and yes, Trailer Hitch, #75673, will fit a 2015 Subaru Legacy with dual exhaust. You will just need to temporarily lower the exhaust system on both sides on the vehicle by removing the two rubber isolators from…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 8

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 12

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an…

view full answer...

Does Draw Tite Hitch 75673 Fit Both a 2016 and 2017 Subaru Outback Premium Non-Sport Model

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching