Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # 14053
Retail:$454.95
Our Price: $296.82
You Save: $158.13
Confirmed to Fit
1999 Ford Van
Full Size, including Superwagon
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (32)
- Q & A (0)
- Photos
1999 Ford Van - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Class IV
- 2 Inch Hitch
- 10000
- Visible Cross Tube
- CURT
- 1000
- 12000 lbs WD GTW
- 1200 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Ford Van's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 10,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 1,000 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 10,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
14053 Curt Class 4 Trailer Hitch Receiver
Compare to Draw-Tite 75703
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.
Tongue Weight (TW):
1,200 lbs.
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.
Tongue Weight (TW):
1,200 lbs.
Tech Tip
Carbon canister, if present, will need to be lowered temporarily. Drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation
Complete Towing Package for 1999 Ford Van
Retail:$608.59
Package Price:$388.56
1999 Ford Van Owners Who Purchased This Trailer Hitch Also Bought...
Popular Van Trailer Hitch Accessories
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Too difficult to install
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 14053
Average Customer Rating: 5.0 out of 5 stars (32 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: 04/22/2024
Fitted perfectly,(96 e250 Ford van).
by: William A01/04/2024
good quality and received undamaged
by: Jeff 11/20/2023
Real fast shipping and great price. Tha nks
by: Phillip K.11/11/2015
Our family has been in the classic car business since 1969.....I have chained a trailer hitch on the back bumper many times and headed out for California...very recently my sister bought a vending route along with a 1 ton van....she bought a new trailer hitch somewhere and wanted me to drill holes in the frame because it wasn't the correct one...I found etrailer online and called...the product was here overnight and Suz installed it herself!!.....I highly recommend etrailer..... thank Katie D!
by: Bernd09/18/2023
Excellant Product good value
by: Milton12/11/2017
1998 Ford Edge
Love the video. It was a great help in installing this hitch. Very easy to follow. Nice tip with the silicone adhesive to hold the washers in place. The receiver edge sits back under my bumper about 5 in. Unfortunately a little bit farther back than my previous hitch so I have to buy new ball mounts now. Would have been nice if the hitch had been designed to angle back to end up at the edge of the bumper. There are not very many ball mount options for where it sits.
But I found what I needed. The hitch is on and looks sturdy. And soon I'll be able to tow again once I receive the ball mounts from etrailer.com
by: Craig10/30/2017
1998 Ford Five Hundred
This hitch receiver works as it should. It came well finished, with clear instructions and all the hardware needed to install it. I had a question about possible clearance issues and called etrailer customer support. The tech was great and answered all of my questions. The hitch receiver fit great, no additional drilling was needed. I also was able to reinstall my spare tire under the van, which my older hitch receiver did not allow enough space for.
I have a step bumper on my 1998 Ford E350 van. I was going to use if for my hitch mounted tilt up, cargo carrier, with a 500 pound capacity. This hitch receiver sets back a couple inches too far from the step bumper and would not allow the cargo carrier to tilt up, unless I used a hitch extension. I used an 8" extension with a 5k tow and 500 pound tongue capacity. Using a hitch extension will decrease your load capacity. So, make sure the hitch extension is capable of handling the load you will be putting on it.
by: Mike Adams06/06/2018
The Curt products I received are as described, high quality and were well packed. The hitch fits the 27-year-old vehicle. I was glad to have such a large range of products across different brands, and the prices were the best I found. The shipment of hitch receiver, ball mount, ball, etc., got here just a few days after I ordered it. I didn't expect such fast shipping. I will recommend etrailer.
by: Mark N.03/24/2012
1996 Ford Van
One day after placing my order, I received an email informing me that my order had been upgraded from the shipping choice I had selected to a faster delivery at no extra cost to me. I had an excellent experience with this company and will recommend it to anyone that requires a hitch and/or accessories. Thank you!
by: Ron B05/06/2020
Easy assembly, took HOMEMADE HITCH off and replaced receiver hitch made for the van. Looks and works well pulling our church trailer for camps. Thanks, GREAT PRODUCT!!
by: Paul 04/12/2023
2006 Ford Van
Well made USA
by: Barton07/21/2018
1998 Ford Van
Hitch went on with no problems. Hardware was more than enough and easy to use!
by: Bruce 08/11/2020
1990 Ford Van
Have not installed it yet but looks and feels well built with all hardware included.
by: Mike 08/04/2021
Fit excellent at the right price
Mike F.
8/5/2022
I own a welding business and this hitch was very cost effective fit as it should. I had experience in this field I in stalled hitches for [another retailer] for about two years and this hitch fit as it should
by: Jon 07/02/2021
Outstanding! I love etrailer!
by: Kevin05/30/2016
1976 Ford Van
Fit exactly as described and has worked great over the year I have had it. Easy install.
Kevin
6/9/2017
It still works great. Its a good product and works as it should.
by: KENNETH G.07/25/2013
GREAT COMPANY!!!! THEY UPGRADED MY SHIPPING FOR FREE ARRIVED MUCH EARLIER THAN EXPECTED. THE HITCH IS AWESOME.
by: Alan I. Desrosiers07/24/2012
Product fit better than expected ... no drilling required, lined up with all factory holes, just bolted up and torqued. Could not have asked for a better product. Shipping arrived as promised.
by: Chris09/21/2015
1996 Ford Van
Was as easy to install as was advertised. Good quality welds on a heavy gauge steel.
by: David02/05/2018
The product fit well it was easy to install shipping was very fast
by: Michael W.03/30/2014
1999 Ford Van
Works as advertised.
by: Larry R01/04/2017
1996 Ford Van
Received as scheduled and had it installed in 1 hour. Quality was very good.
by: Belinda 03/07/2024
by: Joshua 09/25/2023
by: Rey03/03/2024
25
32
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- What Is The Width Of A Trailer Hitch Receiver For My 1998 Ford Expedition?The hitch you have will not fit. The correct hitch for your 1998 Ford Expedition has a center to center hole measurement of 46-3/4" as shown in the diagram of the Curt Trailer Hitch Receiver # C13049 that is designed for your vehicle. Since the hitch you have will not work I recommend going with the # C13049 due to it being made here in the USA, and having a durable powder coat finish which we have seen hold up better than the finish on other hitches. This hitch has a 600lb tongue weight...
view full answer...
- Recommended Hitch for a 1991 Ford Econoline Grand WagonYes, I would be happy to help you find a receiver hitch for your 1991 Ford Econoline Grand Wagon. I recommend the Curt Trailer Hitch item # 14053. It has a maximum gross trailer weight of 10,000 lbs and a maximum tongue weight of 1,000 lbs. This is a custom fit receiver that bolts directly onto your van without any welding. It does include hardware. I also recommend the Tekonsha 4-Pole Hardwire Kit with Circuit Tester item # 18252. This wiring kit comes with everything you need to add...
view full answer... - What Year Ford Vans Does Curt Hitch # 14053 FitWhile the body style of the Ford vans has changed quite a bit over the years luckily the frame has stayed basically the exact same so the Curt hitch part # 14053 does fit Ford full size vans from 1975 through 2006. Here's complete list: 2004 - 2006 Ford Van E-150 2004 - 2006 Ford Van E-250 2004 - 2006 Ford Van E-350 1975 - 1994 Ford Van Full Size 1995 - 2003 Ford Van Full Size, including Superwagon
view full answer... - Distance Between Mounting Holes of the Curt Hitch 14053I spoke with my contact at Curt and he informed me that the distance between the bolt holes centers on this Curt Class IV Trailer Hitch Receiver, part # 14053, is 38-1/2 inches. You would need to compare that distance to the your frame rails to see if the mounting holes of this hitch would be compatible with your frame. If your outside to outside measurement is 42 inches this SHOULD work well, but I would still recommend measuring.
view full answer... - Recommended Hitch for Turtle Top Van Terra Built on 2000 E350For what you are describing, I think the best option is to use the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube, # 41990; this is a 2" receiver Class V hitch. this is to be welded in to place using either the 16" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch, # 4916 or, the 7" version, # 4907. This will provide you with a Class V hitch and multiple placement options best fit your needs. If I follow correctly your last statement of the...
view full answer... - Trunk Mounted Bike Rack for 2006 Pleasureway RV on Ford E350 Cutaway ChassisAs long as your bike weighs in at 35 lbs or less, the Hollywood Racks Gordo 2 bike carrier # HRG2 that you looked at would work well, as your motorhome retains the rear doors used on the van model. The rack will hold the bike tightly, and if properly adjusted the rack won't move on the vehicle. I've linked to a demonstration video featuring the rack. However, since you seem concerned about the rack being rock solid, a trailer hitch and hitch mounted rack would preform the best for you....
view full answer...
- Trailer Hitch Receiver For A 42 Inch Wide Mini Bus When it comes to installing a trailer hitch on your 42 inch wide minibus I recommend The Adjustable Width Trailer Hitch Receiver for RVs, 22 inch to 72 inch Wide # 13703. The trailer hitch has a high-gloss black powder coat finish that resists rust, corrosion, and is resistant to scratches and UV damage. The hitch will fit a frame width between 22 inches to 72 inches, and the trailer hitch has a maximum gross trailer weight up to 3,500 pounds and has a maximum tongue weight of 350 pounds....
view full answer... - 7-Way, Brake Controller and Hitch Recommendation for 1997 Ford E-350For a hitch confirmed as a fit for your 1997 Ford E-350 van we have the Curt Class IV hitch part # 14053 which would work well. It has a 10,000 lb trailer towing capacity and installs about as easy as you'll find. You will need to start with a 4-way (if you do not have one). For that you would want the # 118344. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter...
view full answer... - Length of Mounting Bracket for Mounting Curt Trailer Hitch to Motorhome on 2005 Ford E-350 ChassisThe length of the mounting brackets for the Curt Trailer Hitch Receiver # 14053 is 15-1/8" as you can see from the attached photo. Since the frame is extended past the regular body length it could very well affect the towing capacity of your motorhome so it would be wise to do some research on that and maybe reach out to the manufacturer as well to get their take on it. If you don't have bolt holes readily available that would work with the 14053 hitch then you may consider using something...
view full answer...
- Hitch Recommendations for a 1986 Ford E-350 Box TruckI spoke with my contact at Curt and he informed me that the distance between the bolt holes centers on this Curt Class IV Trailer Hitch Receiver, part # 14053, is 38-1/2 inches. Did you measure from the center of the frame rails or from the center of the bolt holes on your 1986 Ford E-350 box truck? From the frame down to the hitch opening will measure 2 inches with this hitch. Usually box trucks/service body trucks require a multi-fit hitch like the # 41990 that has a 16k capacity....
view full answer... - Recommended Class IV Hitch for 1991 Ford E-350There is a custom fit Class IV hitch for your 1991 Ford E-350 van with a 42" wide frame; you'll want to use the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14053. You may need to drill the holes if they aren't there, but this is designed to fit your E-350. If you'll be towing with this hitch, you'll also need trailer wiring. For that I recommend using the Tekonsha # 18252 which is a simple, splice in kit that will give you a 4 way wiring harness. To complete your towing...
view full answer... - High Capacity Trailer Hitch for Motorhome on 2005 Ford E-450 Cutaway Van ChassisWe might have a hitch that'll work for you, but you'll need to take a couple of quick measurements. If the center to center bolt hole spacing (from side to side) is 38-5/8 inches and the drop (distance from the underside of the frame member to the lowest point of the back bumper) is less than 2 inches, the Curt # 14053 with its 10000 lb towing/1000 lb tongue weight capacity will work for you. If you need a larger drop than that, the Draw-Tite # 41990-07 weld-on service body hitch offers...
view full answer... - Trailer Hitch Fit for 1993 Ford E-350 with 42 inch FrameYour 1993 Ford E-350 with a 42 inch frame has a standard dimension frame width so our Curt hitch part # 14053 would fit and work well. The other hitches listed at the attached link will also fit too.
view full answer... - what is the bolt pattern for 2003 suburban 1500 2wheel drive receiving hitch?For a trailer hitch for your 2003 Chevy Suburban I would recommend the Hidden Hitch # 87614. This hitch has been confirmed to fit your vehicle and would work well for you. If you wanted to email me back with what bolt hole measurements you are looking for I would be more than happy to run out to our warehouse to get them for you. I attached installation instructions for this product for you to check out also.
view full answer... - Hitch Recommendation For A 1999 Ford E450 Shuttle BusLooking to the towing section of the owners manual for the 1999 Ford e450, though it never specifically calls out the e450 model in the Trailer Towing Table, for every model with a 7.3 Diesel and 4.10 rear axle ratio, the maximum GCWR is around 20,000lbs and trailer weight of 9,500-10,000lbs. My recommendation is the Curt Trailer Hitch Class IV Receiver # 14053 rated for 1,000lbs of tongue weight and up to 1,200lbs of tongue weight when used with a weight distribution system. A weight...
view full answer... - What is the Distance Between Bolt Holes on the Curt Trailer Hitch # 14053I spoke with my contact at Curt and he informed me that the distance between the bolt holes centers on this Curt Class IV Trailer Hitch Receiver, part # 14053, is 38-1/2 inches. I attached installation instructions below for this product also to give you a better idea of how this hitch installs.
view full answer... - Trailer Hitch Compatible with 1990 Ford E350 VanAccording to my Curt Representative, the Class IV # 14053 or the # 13053 Class III hitch is a fit for the 1990 Ford E350 Van. The Class IV hitch has a 1000 lb tongue weight 10,000 lb towing capacity. The # 13053 Class III has a 500 lb tongue weight, 5,000 lb towing capacity. You can purchase either hitch by clicking on the provided product links.
view full answer... - The Frame Of My 1977 Ford Van Has Rivets On The Frame. Will The Curt # 14053 Still Fit?The notches on this hitch # 14053 are not designed to fit around the rivets. Rather the hitch flange will sit directly below the rivets. This hardware kit includes steel spacers which go between the frame and the hitch. These allow the hitch it be installed without interference from the rivets. We installed this hitch # 14053 on a 2003 Ford Van which had similar rivets in the frame. I have linked our install video below. If you fast forward to around the 3:00 mark you can clearly see the...
view full answer... - High Capacity Trailer Hitch, Brake Controller and Wiring Recommendation for 1998 Ford VanFor your 1998 Ford F-350 we have the Curt hitch part # 14053 which has a 10k capacity that would work well. For trailer wiring you will need to start with a 4-way (if you do not have one). For that you would want the # 118344. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product...
view full answer... - Recommended Trailer Hitch Receiver for 2000 Winnebago Itasca Spirit on Ford E-350 ChassisThe Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14053 is a confirmed fit for the Ford Full Size Van but it is not a fit for a cab and chassis like you have which has a slightly wider frame. My recommendation due to the weight you will be towing is to use the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41991-07. This is a weld on versus bolt on option, but all the bolt on options won't allow for the capacity you need.
view full answer...
- Trailer Hitch Fit for 1998 Ford E-350 VanWe do have a trailer hitch for you, though the Ford E-350 didn't have a Super Duty version available until 1999, so what you have is an Econoline model (and just as a note, we don't have a way of searching anything by VIN so this was based on research; you may want to call that VIN into a local Ford dealer). Having said that, the correct trailer hitch receiver for a 1998 Ford E-350 Econoline is the Curt Trailer Hitch Receiver # 14053. Additionally, if you plan on towing and need a trailer...
view full answer... - Recommended Trailer Hitch and Brake Controller for a 1993 Ford E-250The trailer hitch I recommend for a 1993 Ford E-250 is the Curt Trailer Hitch Receiver part # 14053 which offers up to a 10,000 lb weight capacity. For a trailer brake controller, the Tekonsha BRAKE-EVN Trailer Brake Controller part # TK63VR is a great option and offers plug-in-play installation when used with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3035-P (Models with Factory 7-Way).
view full answer... - Trailer Hitch Receiver Options For A 2005 Ford E-350 School Bus Hi Jacob, The Curt Trailer Hitch Receiver # 14053 lists that it's a fit for cutaway chassis if the bolt holes are 38-5/8 inches from frame to frame. This would mean that the holes in your frame have to be spaced 38-5/8" from center to center in order for the hitch to work. With your vehicle be a school bus and the dimensions that you stated you'll likely have to go with a weld-on adjustable fit trailer hitch receiver. You'll want to measure the distance down from the frame to clear...
view full answer... - Heaviest Duty Trailer Hitch Recevier for Motorhome on 1999 Ford E-350 Super Duty ChassisWe have the exact hitch you need for your motorhome on a 1999 Ford E-350 Super Duty chassis, the Curt Trailer Hitch Receiver # 14053. This has the 10,000 lb towing capacity and 1,000 lb tongue weight capacity you wanted (the most available), and it does not have to be welded on. The installation will require you to drill small holes in the frame (all hitches that fit your motorhome will) and this will let you bolt the hitch right on. I have added a link to a video review and the installation...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Brent H
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video by:
Joshua S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Phillip K.
3/12/2017
thanks,..I am very satisfied with the product...and the great service....and I will be ordering again in the future....thanks Laura